Western Pneumatics WP-460 Dust Collection SystemCall for Price

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Tony Cornacchione

800-374-5009 ext:432

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113191.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113192.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113193.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113194.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113195.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113196.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113197.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113198.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-0113199.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-01131910.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-01131911.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-01131912.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45908&FILE=THMB_DO-01131913.jpg" />


EQUIPMENT DETAILS


  • Make:Western Pneumatics
  • Model:WP-460
  • Location:MTN/CENTRAL CDN,
  • Stock Number:DO-011319

 

EQUIPMENT DESCRIPTION

 

WESTERN PNEUMATICS 'WP-460' Dust Collector (SECONDARY SEPARATOR), 34,342 CFM in walk-in plenum, (475 ) filter bags 120" long x 5" dia. for a total 6,021 sq. ft. of bag area. Baghouse shell is approx. 13' dia. & about 18.1' high. -- Equipped with: (1) TWIN CITY 490 RTF (Radial Tip Fan) , unitary base, flanged inlet & outlet, 200 HP TEFC fan motor. . -- FILTER CLEANING: Bags are mounted up-side-down with cell plate just above the filter inlet. Rotating arm mounted below the cell plate, for reverse air filter cleaning driven by 0.5 HP motor. Gravity and suction from a low pressure purge fan evacuates the inside of each bag. Purge fan discharge is conveyed to the top (inlet) of the Cyclone. -- PRIMARY SEPARATOR (HIGH-EFFICIENCY CYCLONE): 9.6' dia. by about 31.5' high has involute, located in front of the inlet, separates material from machinery dust sources and dust purged from the bag cleaning. WP 20" X 20" FEEDER with 2 HP motor, complete with . -- Complete with; 40"x 40" WP Abort gate, CLARKES two-zone spark detection system, 20 HP approx. Transfer Blower to convey discharge to storage location. -- Existing Installation: Unit was not being used at full capacity and depending on Air-to-cloth ratio and Static Pressure desired, air flow can be increased, ie. approx. 49,700 CFM @ 14" SP & 8:1 ACR, 185 BHP.to approx 62,000 CFM @ 10:1 ACR with suitable fan. -- Comes with: Electrical starters & controls may be shared and available only as much as can be separated, (2) standard explosion vents & sprinkler kits with (4) heads piped to the outside piping , caged ladder, access platform, & support. --FEATURES: Baghouse and Bin are all bolted construction for easy dismantling & economical transportation. -- ALSO AVAILABLE (as pictured) for additional cost, at same location): (1) 30 Unit Western Pneumatics Zone IV Truck Bin with carry-over screw and overflow provisions, (1) cyclone 4.5' dia. and Material Transfer fans, etc. Address your inquiries to Tony. -- System will be on the ground. Professional rigging & truck loading available, call for quote

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Tony Cornacchione

800-374-5009 ext:432

View Seller's Entire Inventory and Information