Extrema XS-1A43 Sander$9,875

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Ed Webb

800-374-5009 ext:377

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54818&FILE=THMB_SW-0118071.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54818&FILE=THMB_SW-0118072.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54818&FILE=THMB_SW-0118073.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54818&FILE=THMB_SW-0118074.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54818&FILE=THMB_SW-0118075.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54818&FILE=THMB_SW-0118076.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54818&FILE=THMB_SW-0118077.jpg" />


EQUIPMENT DETAILS


  • Make:Extrema
  • Model:XS-1A43
  • Location:MIDWEST,
  • Stock Number:SW-011807

 

EQUIPMENT DESCRIPTION

 

EXTREMA - XS-1A43, Single Head Wide Belt Sander.42" Working width, to 5" max. opening with electronic digital microprocessor thickness control. -- Rubber covered contact drum and 2-1/2" wide finishing platen, 25 HP main motor; 43" x 60" abrasive belt, TRU-TRAK solid-state electronic belt sensing with pneumatic tracking. -- GOODYEAR Endless conveyor belt with pneumatic tracking, 2 HP variable speed feed motor from 15 - 48 FPM. -- 0.5 HP Motor to raise & lower table via (4) jack screws, over-thickness bar at front of machine, and AUTO-SET thickness device. -- Complete with: Double infeed & outfeed rubber covered holddown rolls, air operated disc brakes on main motor, front & rear emergency stop buttons and motor load meter. -- Features: Square "D" Electrical controls; magnetic Starter with overload protection, and electrical interlock at sanding belt access doors.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Ed Webb

800-374-5009 ext:377

View Seller's Entire Inventory and Information