2017 EMC WOODY 1100 2RK SanderCall for Price

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Joe Retzlaff

800-374-5009 ext:348

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55837&FILE=THMB_SX-0125991.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55837&FILE=THMB_SX-0125992.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55837&FILE=THMB_SX-0125993.jpg" />


EQUIPMENT DETAILS


  • Year:2017
  • Make:EMC
  • Model:WOODY 1100 2RK
  • Location:MIDWEST,
  • Stock Number:SX-012599

 

EQUIPMENT DESCRIPTION

 

EMC Woody 1100 2RK Calibrating Sander with (2) Sanding Heads: Roller (Drum) and Combination Head:Full-options machine, demonstration model, used only for demos at exhibitions. Full factory warranty. Special price!Technical data: ● Useful working width 1,100 mm (43"). ● Working thickness min/max mm 3 - 190 (1/8" - 7-1/2"). ● Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 1,120 mm (44"). ● Feed belt speeds adjustable by INVERTER from 2.5 to 14 m/Min (8 - 45 FPM). Head configuration: -- 1st Head: Roller Diam. 125 mm (5"), Rubber Covered Roller, 85 Shore hardness. Including On-Off Selector for roller. Roller Pressure Adjustment Control and "Grit-set System". Independent 11 kW (15 HP) Two-Speed Main Motor. Abrasive belt speed 8 + 16 m/Sec (26 + 52 FPS). . -- 2nd Head: Combination Roller & Pad. Contact Roller diameter 102 mm (4"). Rubber covered hardness 45 Shore. Roller pressure adjustment control and "Grit-Set system", electronic motorized grit compensation. Including On-Off Selector. Electronic segmented Sanding Pad type "CP" with 20 segments, each 55 mm wide (2-3/16"). Including On-Off Selector. Quick Change System: Removable pad with felt, rubber and graphite. Independent main motor 11 kW (15 HP). Electronic inverter for variable abrasive belt cutting speed 3 - 17 m/Sec (10 - 55 FPS).Electronic colour 7" Touch Screen control & display. PLC with micro-processor - CP0291. Connection for USB, RS232, Ethernet 10/100/1000. Storage capacity of 100 sanding programs. Command, programming & display of all electronic pad functions.Both heads equipped with: ● Oscillating blower for abrasive belt cleaning. ● Abrasive belt oscillation by means of electronic photocell sensor -- Feed System: ● Vacuum bed assembly for holding of small pieces. Including 2,2 kW (3 HP) fan, inverter controlled, mounted in machine frame. ● Motorized table lifting including fine adjustment, on 4 precision screws. ● Natural rubber conveyor belt, machined. ● Feed belt centering by means of conical rollers. ● Electronic digital display for working thickness; resolution 0.1 mm (0.004"). ● Idle table rollers support in infeed and outfeed. ● Blowers for panel cleaning at outfeed. ● Rubber covered presser rollers, grooved. -- Centralized Control Cabinet: ● Analog ammeter on main control cabinet. ● Table lifting-lowering thickness system electrically controlled. ● AUTOMATIC star/delta starter on abrasive belts motors. ● IP 54 protection Against dust & moisture. -- Centralized independent pneumatic control cabinet: ● Pneumatic air filter with automatic water-drain system. ● Pneumatic adjustment for "Grit set system". ● Pneumatic plant working without lubrication. ● Compressed air pressure 6 bar (85 PSI). -- Options included: ● Independent motors. ● Segmented pad with infeed reading barrier. ● 7” control unit. ● On/

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Joe Retzlaff

800-374-5009 ext:348

View Seller's Entire Inventory and Information