2014 SCMI SANDYA 16 S Sander$79,000

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Joe Retzlaff

800-374-5009 ext:348

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125331.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125332.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125333.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125334.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125335.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125336.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125337.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125338.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49047&FILE=THMB_SX-0125339.jpg" />


EQUIPMENT DETAILS


  • Year:2014
  • Make:SCMI
  • Model:SANDYA 16 S
  • Location:WESTERN CDN ,
  • Stock Number:SX-012533

 

EQUIPMENT DESCRIPTION

 

SCM SANDYA 16 S RRT 135 VN - 3-Head Wide Belt Sander; -- 1,350 mm (53") working width.Head configuration: -- 1st Head: Steel 10" helical grooved contact roller with single speed 25 kW (35 HP) motor. -- 2nd Head: 10" grooved rubber (55 Sh) contact roller, Two Speed 22 kW (30 HP) motor. -- 3rd Head: Electronic Sectional Platen with 37 sectors for Veneer Sanding. Variable speed with inverter on 15 kW (20 HP) motor. Sanding Belt width 1,350 mm x length 2,620 mm (53" x 103").Feed system: -- Motor 3 kW (4 HP), variable feed speeds 3 - 18 m/min (10 - 60 FPM), natural rubber feed belt 60 Shore, automatic feed belt tracking and tensioning device, motorized rise and fall of working table. Part thickness 3 mm (0.1") to 160 mm (6.3").Features: -- Logic TS Controller with 10" LCD color display. -- B46 Reading Bar for Sectional Pads with (37) Sectors. -- Vacuum Table with 10 HP vacuum Motor. -- Infeed and outfeed table extensions (5 rollers each). -- Timed oscillation abrasive belt blowers on each working unit. -- Electronic sanding belt tracking. -- Digital readout of part thickness. -- Infeed safety bar for operator protection and over-sized parts. -- Front and rear emergency push button. -- Main switch with ability to be locked out by padlock. -- Automatic star-delta starters for the main motors. -- Overload protection on main motor. -- Isolation class IP54. -- Automatic brake for rapid shutdown of operating groups. -- Automatic emergency stop for:... sanding belt breaking... loss of tensioning of sanding belt... lateral outplacement of sanding belt... absence of compressed air... overload on main motors. -- Machine in compliance with CE-regulations. -- Machine weighs 8,300 lbs. (3,765 kg).

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Joe Retzlaff

800-374-5009 ext:348

View Seller's Entire Inventory and Information