2013 Homag KAL 210 AMBITION EdgebanderCall for Price

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Karl Balg

800-374-5009 ext:355

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../content/images/photo_not_available_THMB.jpg"/>


EQUIPMENT DETAILS


  • Year:2013
  • Make:Homag
  • Model:KAL 210 AMBITION
  • Location:MID ATLANTIC,
  • Stock Number:EO-012197

 

EQUIPMENT DESCRIPTION

 

HOMAG KAL 210 AMBITION 2262 ... Production Edgebander with Pre-Milling & Corner Rounding:WORKING CAPACITYEdge thickness, coiled stock min/max, 0.4 - 3 mm (0.016. - 1/8"), straight edges, min/max. 0.3 - 6 mm (0.16 - 15/64"), panel thickness min/max. 8 - 60 mm (5/16" - 2-3/8").In-feed Fence:Adjustable in-feed fence with manual digital indicator positioning. Pre-Milling Station:Two vertical jointing spindles; KW 3.0 x 2 (HP 4.0 x 2), 150 Hz, 9,000 RPM Motors; equipped with panel blow-off device and SIKO digital counters for adjustments.Edge Magazine: Vertical Coil Magazine, (2) positions. Gluing System: (EVA - Hot Melt)QA 34 - Quick Melt Overhead Unit & roller applicator (reversible).Pressure Section Type C:Programmable NC motor positioning with (1) large 150 mm dia. driven & (6) idle rollers, pneumatically pressure control depending on edgbanding material used.WORKSTATIONSEnd Trimming Unit "HL-81":kW 0.8 x 2 (HP 1.0 x 2) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer 30 deg. to straight cut.Rough/Pre-Trimming Unit:Top & bottom, kW 0.55 x 2 (HP 1.0 x 2) - 12,000 RPM ea. motor; Height adjustment with the top pressure-beam and tilting range +/- 1°.Profile/Bevel/Corner Rounding Unit "FK11":Multi function (2) motors to fine trim the edge overhangs at the work-piece upper and lower edge, as well as trimming around the front & rear vertical edge. kW 0.4 x 2 (HP 0.54 x 2) motor ea.Profile/Bevel Scraping Unit "PN-10":Top & bottom for thick PVC/ABS, pneumatically activated.Flat Glue Scraper Unit:Top & bottom, pneumatically activated to remove potential glue squeeze-out.Buffing Unit "FA11":Top & bottom edge buffing/polishing.CONTROLSHOMATIC PC 22 Power Control:Controller functions in Windows environment and features: Keypad w/LCD flat screen display, fault diagnostic, OS9 real-time operating system. Hand-held control pendant reaching to the out-feed end of the machine, very useful for set-up and testing new programs.COMPLETE WITHVariable Feed-speed:From 18 - 25 MPM (59 ~ 82 FPM); 80 mm feed track pads, and V-groove belt on top pressure beam which is motorized; motorized raising & lowering of top pressure beam through program selection.>Spraying Units:(2) For "anti-sticking" (1) in-feed side of the machine, (1) prior to Buffing Unit for edge polishing. Other Features: SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabins for all trim workstations, standard adjustable outboard panel support with additional floor supports for heavy panels. Transformer to supply 400 Volt to the machineNOTE Also available a matching LIGMATECH, ZHR 01 Flat Belt Return Conveyor.Can be purchased as a package or separately, ... call for pricing.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Karl Balg

800-374-5009 ext:355

View Seller's Entire Inventory and Information