2008 Cehisa SYSTEM 6PT Edgebander$27,400

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Karl Balg

800-374-5009 ext:355

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121951.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121952.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121953.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121954.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121955.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121956.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121957.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121958.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-0121959.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=55447&FILE=THMB_EO-01219510.jpg" />


EQUIPMENT DETAILS


  • Year:2008
  • Make:Cehisa
  • Model:SYSTEM 6PT
  • Location:MIDWEST,
  • Stock Number:EO-012195

 

EQUIPMENT DESCRIPTION

 

CEHISA, SYSTEM 6PTS ... Edgebander with Pre-Milling & Corner RoundingWORKING CAPACITY ● Panel width min. 75 mm (3") ● Panel length min. 120 mm (5") ● Panel thickness max. 50 mm (2") ● Edge thickness max. coiled 4 mm (5/32") ● Edge thickness straight max. 8 mm (5/16")FRONT ENDPre-Milling Unit: (PF-7) 2 x 2.0 HP motors, one cutter head turns clockwise the other counter clockwise to get the cleanest edge possible. Cutting height up to 30 mm (1-1/8"). Maximum that can be removed from panel is 3 mm (1/8"), digital indicators for positioning. Diamond tooling standard, this ensures the best possible glue line.Automatic Magazine for Strip and Coil Feeding:Large coil table with built-in rollers to allow for 3 mm PVC coils. Edge-strip capacity from 0.3 mm to 8 mm (0.0117" - 5/16") Quick change over from strip to coil, heavy-duty guillotine for cutting up to 4 mm thick PVC/ABS from coil, strip capacity of up to 80 laminate strips for each loading cycle. Glue System (MR-5):Granulate glue pot, with auger feed to glue roller, heat-up time is 10 -15 minutes depending on voltage. Equipped with approaching temperature control (PDI) to ensure exact glue temperature at the glue roller. LED display on digital thermostat with auto temperature drop. Quick-change glue tank for easy maintenance and glue color change, if necessary. Pressure Section (PT-6):Total of (3) pressure rollers, first (1) large driven pressure roller with pneumatic pressure control, (2) secondary rollers with pneumatic pressure control, the first roller is 90ø, the second and third are 89ø & 91ø to ensure a tight glue line. Each roller is individually controlled by its own pressure regulator, setting of pressure station equipped with digital for accurate adjustment, pneumatic positioning for two preset positions executed from the LCD control panel.WORK-STATIONSEnd Trimming Unit: (V.8 L): Straight/bevel end trim unit equipped with two separate @ 0.33 HP (0.27 kW) 12,000 RPM motors; and electronic motor brakes. End trim unit utilizes a copy shoe to insure accurate and consistent trimming. Each motor travels on a 40° incline to insure accurate cuts and higher speeds. Pneumatic positioning for quick change from flush or bevel executed from the LCD control panel.Flush/Pre-Trimming Unit (BC-5):Top/bottom opti-point quick change system. Equipped with 2 x 0.75 HP (0.55 Kw) 12,000 RPM trimming motors, tilts from 0 - 20° with a quick locator pin at 10°. Straight insert tooling with index able disposable carbide inserts for bevel and flush trim. Digitals for copy wheels and copy shoes, pneumatic positioning for two preset positions executed from the LCD control panel.Bevel/Fine/Profile Trimming Unit (BC-5):Top/bottom opti-point quick change system, equipped with 2 x 0.75 HP (0.55 Kw) 12,000 RPM trimming motors, tilts from 0 - 20° with a quick locator pin at 10° with combination insert tooling with disposable carbide inserts for 3 mm radius, flush and bevel trim. Digitals for copy w

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Karl Balg

800-374-5009 ext:355

View Seller's Entire Inventory and Information