2007 Northtech NT-610XL/SLRS 25 Planer$79,500

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Jeff Terrill

800-374-5009 ext:349

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106911.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106912.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106913.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106914.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106915.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106916.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106917.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106918.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-0106919.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46396&FILE=THMB_PD-01069110.jpg" />


EQUIPMENT DETAILS


  • Year:2007
  • Make:Northtech
  • Model:NT-610XL/SLRS 25
  • Location:SOUTHWEST,
  • Stock Number:PD-010691

 

EQUIPMENT DESCRIPTION

 

Northtech NT-610SC-1 Top & Bottom Planer -- Capacities: 24" wide x 7.5" thick capacity; 1/4" minimum thickness; 12" minimum stock length -- Cutterheads: 40 HP top head; 30 HP bottom head; 5,800 RPM on cutterheads; (6) row spiral insert cutterheads, Carbide knives 15 mm x 15 mm x 2.5 mm 4-sided -- Feed works: 7.5 HP variable speed feed with speeds from 18 to 130 FPM; 1 HP motorized raise and lower of bed; DP-525 digital thickness controller; Carpet "spiked" style feed -- Includes: Sectional chip breaker; Hard chrome plated bed; Automatic lubrication for feed system; Amp load meter (2) 7" dust outlet.WOODSTORM SRU - Surfacing and straight line ripping system. The SRU consists of the following elements ● Pinch Roller--pulls boards from the surfacer and properly even-ends and references them to the saw infeed. ● Cross Transfer--consists of stainless steel slide plates set in-between four arms of roof top chain which accept boards from the surfacer and laterally transfer them to the Speed-up Deck. ● Speed-up Deck—Automatic pop-up fingers and a high speed chain deck combine to singulate each board and hand it over to the Saw Infeed. ● Saw Infeed -- the 17’ long fence with built-in pinch roller uses laser technology to automatically adjust to the bow in each board. After the fence has properly aligned with the saw, the board is automatically clamped and fed into the saw.NORTHTECH: NT-SLR-25SC: straight line glue joint rip saw, 25 hp spindle motor, direct motor driven. 3 hp variable speed feed, from 40 to 160 fpm. Distance from blade to column 26". For saw blade range from 12" to 20". Maximum thickness is 5.3". --Additional Features --Bottom kick back fingers automatically drop down when material is engaged and automatically re-position themselves as the material exits the fingers. --Two rows of top kick back fingers. -- Automatic oiling system for chain and raceway. -- One (1) 4" dia, and one (1) 6" dia. dust port., 2000 cfm required for dust collection.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Jeff Terrill

800-374-5009 ext:349

View Seller's Entire Inventory and Information