2007 I M A NOVIMAT CONCEPT Edgebander$43,500

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Karl Balg

800-374-5009 ext:355

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121611.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121612.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121613.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121614.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121615.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121616.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121617.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121618.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-0121619.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216110.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216111.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216112.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216113.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216114.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216115.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216116.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216117.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49006&FILE=THMB_EO-01216118.jpg" />


EQUIPMENT DETAILS


  • Year:2007
  • Make:I M A
  • Model:NOVIMAT CONCEPT
  • Location:MIDWEST,
  • Stock Number:EO-012161

 

EQUIPMENT DESCRIPTION

 

IMA Novimat Concept ... Model I/G80/230/R3, High Speed/Volume Production EdgebanderWorking Capacity: -- Edge Capacity: Edgebanding thickness 0.4 - 3.0 mm, feed speed 8 - 30 MPM (26 - 98 FPM) ~ Panel thickness 10 - 60 mm (0.394 - 2.362"); Min Panel width 65 mm (2.559"), min panel length 150 mm (5.905"). -- Custom Pre-Milling Unit: Fixed vertical single spindle with mechanical up/down, in/out adjustment. Designed to clean-up a poor saw cut or chipped work-piece-edge. -- Infra-Red Heating Zone: Length, 300 mm (12") for pre-heating the panel edge. -- Edge Magazine: Vertical (2) Coil for material change-over with warning light indicator for low & banding outage situations. -- Hot-Melt Glueing System: Overhead Pre-melter and tank, includes large capacity 30 kg (66 lbs.) vacuum feed glue supply barrel for high speed runnig. -- Pressure Section: With (1) large driven roller & (4) concial idle rollers pneumatically controlled to prevent edge damage.Working Units: -- End Trimming Unit: High Speed, horizontally mounted to the top pressure beam 2 x 0.66 Kw (0.89 HP) 12,000 RPM), 0° - 20° tilt -- Rough/Fine Trimming Unit: Top/Bottom 2 x 1.0 Kw (1.35 HP) 12,000 RPM, off-set motor mounts, tilts from 0 - 30°. -- Flat Glue Scraping Unit 08.05: Top/Bottom to remove glue resedue in the area of the glue joint of the panel -- Buffing Unit: Top/Bottom, 2 x 0.25 Kw (0.35 HP) 1,400 RPM. -- Open Space: Inside cabin to reconfigure or add working units if needed.Machine Controls: -- PLC IMATRONIC 121: With the following features ~ color screen, floppy disk reader, keyboard, mouse, adjustable/swivel control unit. Complete With: -- Sound-Proof enclosure cabinet over all the working units with interior lights. ~ Power Beam with wide V-Belt hold-down pressure belt. ~ Multi Voltage Transformer, ~ Factory machine documentation.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Karl Balg

800-374-5009 ext:355

View Seller's Entire Inventory and Information