2007 Homag KAL 210/7/A20/S2 Edgebander$49,500

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Karl Balg

800-374-5009 ext:355

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121891.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121892.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121893.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121894.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121895.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121896.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121897.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121898.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-0121899.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218910.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218911.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218912.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218913.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218914.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218915.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218916.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218917.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218918.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218919.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54708&FILE=THMB_EO-01218920.jpg" />


EQUIPMENT DETAILS


  • Year:2007
  • Make:Homag
  • Model:KAL 210/7/A20/S2
  • Location:MIDWEST,
  • Stock Number:EO-012189

 

EQUIPMENT DESCRIPTION

 

HOMAG OPTIMAT KAL 210/7/A20/S2 (aka KAL 700) ... Production Edgebander with Pre-Milling & Corner Rounding;Working Capacity: Capacity: Min/max. 0.4 - 20 mm edge thickness cap., min. panel width 55 mm (2-1/4"), panel thickness 12 - 60 mm, min. edge length 7.8"Equipped With: -- In-feed Fence #0007, adjustable with automatic CNC positioning. -- Spraying Device #2929, top/bottom separating agent via spray nozzles ahead of pre-milling. -- Pre-Milling #1334, (2) heads (each with 3 kW - 9,000 RPM motor, one with jump control); chip blowoff unit after last head; SIKO digitals for horizontal & turret for vertical adjustments; pre-heating infeed fence (for panel edge). -- "Quick Melt" Glue System "QA 34" with per melt hopper feeder & roller applicator (reversible) -- Edge Magazine, multi-purpose, automatic (2) coil feed magazine for coil material up to 3 mm thickness, strip feed magazine for up to 20 mm (3/4") solid wood banding. -- Pressure Section Type C, servo motor positioned, pneumatic pressure controlled with (1) large dia. driven & (6) idle rollers.Workstations: -- End Trimming Unit HL 84, double motor front & rear end trim (0.7 HP - 12,000 RPM motor ea.), pneumatic chamfer setting. -- Flush Trimming Unit #3209, top & bottom rough trims (2 HP - 12,000 RPM motor ea.), tilts +/- 1°. -- Bevel/Radius Straight & Corner Rounding Unit F 12 #3503, top & bottom bevel or profile trimming for linear and for leading & trailing edge (4 x 0.6 HP - 12,000 RPM motors), up to 4 mm edge thickness (all trim station motors are 200 Cy HF and equipped w/electronic brakes). -- Open Space, 600 mm (23-5/8") for potential additional unit like Universal Milling/Grooving Unit. -- Profile Scraping Unit PN 10, from top, bottom and side for chamfering or rounding of pre-trimmed PVC edges; pneumatically controlled blowing nozzles; max. edge thickness 3 mm (1/8"), panel thickness 12 mm to 60 mm (15/32" to 2-3/8"); unit laterally adjustable by max. 50 mm (1-31/32"); collection box for PVC shavings. -- Glue Scraping Unit, top/bottom for removal of potential glue residue. -- Buffing Unit, top/bottom height adjustment with top pressure beam without tools; manually adjustable.Controls: -- HOMATIC "PC 22", 2GHz CPU WITH 512 Mb RAM, USB port, functions in XP Windows environment, keypad with TFT flat screen LCD display, onscreen fault diagnostic, part and lineal feet/meter tracking, etc.; diagnostic analysis from HOMAG via Modem fault diagnostic is possibleComplete With: -- Motorized Top Pressure Beam with powered V-belt hold-down, 80 mm wide Heavy Duty feed chain w/rubber pads, automatic chain track lubrication system, 5 HP feed drive for variable feed speed of 23 - 98 FPM. -- 10 KVA - 200 Cy frequency converter, electronic DC brakes on all trim motors, sound cabins for all trim workstations, adjustable outboard panel support with floor supports.Note: Actual Model is Optimat KAL 210/7/A20/S2

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Karl Balg

800-374-5009 ext:355

View Seller's Entire Inventory and Information