2007 Fletcher Machinery FM-45 Edgebander$45,500

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Karl Balg

800-374-5009 ext:355

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121211.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121212.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121213.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121214.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121215.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121216.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121217.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121218.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-0121219.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-01212110.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-01212111.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-01212112.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-01212113.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45988&FILE=THMB_EO-01212114.jpg" />


EQUIPMENT DETAILS


  • Year:2007
  • Make:Fletcher Machinery
  • Model:FM-45
  • Location:SOUTHEAST,
  • Stock Number:EO-012121

 

EQUIPMENT DESCRIPTION

 

FLETCHER FM-45 ... Production Edgebander with Pre-MillingWorking Capacity:1/64" - 1/2" Edge thickness cap., min. panel width 3"; min/max. panel thickness 1/2" - 2-1/8"; Feed speed variable up to 60' FPM.Equipped with: -- Pre-Milling Unit, 5-HP milling spindles (none jump) manually adjustable. -- Hot Melt Glue System: Overhad glue tank with 1.0 gallon capacity with (2) temperature zones and individual controls. -- Edge Magazine: Automatic coil/strip feeding min. strip lenght 3-1/2", max. coiled edgbanding thickness 3/64" (1.0 mm). -- Pressure Section: Pressure roll section, pneumatically controlled pressure with (4) rollers, (1) large dia. driven & (3) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses. -- Special Feature: Complete Edgebanding Section tilts from 0 -19° -- Control System: PLC controlled with color touch screen approx. 8" LCD display.Workstations: -- End Trimming Unit: Linear bearing guided, (2 x 1.0 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel. -- Flush/Pre-Trimming Unit: Top & bottom trim station, 2 x 2.5 HP - 12,000 RPM) manual positioning with digital counters. -- Bevel/Fine-Trimming Unit: Top & bottom fine or bevel trimming 2 x 1.0 HP, 12000 RPM motors, max. edge thickness 1/4", tilts with manual digital counter positioning and 0 - 3° off-set positioning of top trimmer only for bevelled work-piece edge.Complete with & Features: -- Sound cabin for all workstations with interior lighting. -- Adjustable outboard panel support with swing out arms. -- "HD" feed chain with replaceable serrated urethane track pads and automatic chain lubrication. Manually adjusted top pressure beam.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Karl Balg

800-374-5009 ext:355

View Seller's Entire Inventory and Information