2005 SCMI K 208-ERT-L Edgebander$10,875

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Ed Webb

800-374-5009 ext:377

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103521.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103522.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103523.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103524.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103525.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103526.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103527.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103528.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-0103529.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035210.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035211.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035212.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035213.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035214.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035215.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035216.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46000&FILE=THMB_EU-01035217.jpg" />


EQUIPMENT DETAILS


  • Year:2005
  • Make:SCMI
  • Model:K 208-ERT-L
  • Location:SOUTHWEST,
  • Stock Number:EU-010352

 

EQUIPMENT DESCRIPTION

 

SCMI, K 208-ERT-L Edgebander, ... with Pre-Mill & Corner RoundingBasic Specifications: -- 15/32" (12 mm) Max. edge cap., 2" max. (only 1-3/4" w/corner rounding) banding height, 2-3/8" min. panel width and 6-5/16" min. length. -- Equipped with: "RM-K" 2-Head Pre-milling station model (2.5 HP - 19,000 RPM motors ea.), automatic strip & coil feed magazine w/Heavy Duty 3 mm PVC cap. guillotine. -- Teflon-coated glue pot, glue roller application system complete w/automatic recycling device for unused glue, digital thermostat adjustment for temperature control. 3-Roll pressure unit w/pneumatic controls for all pressure rollers.Workstations: -- End Trimming: Double motor front & rear (0.4 HP - 12,000 RPM motor ea.), tilts 0° - 15°, end trimmers mounted on 45° THK guide. --Pre/Flush Trimming: Top & bottom flush trimming, (0.8 HP - 12,000 RPM motors) none tilt, super imposed mounting position. --Flush/Bevel/Radius Trimming: Top & bottom (0.8 HP - 12,000 RPM motors) tilts 0° - 45°, digital readout mechanical adjustments. --Corner Rounding Unit: (2) Motors for top & bottom leading & trailing corners when edgebanding all (4) sides (2 x 0.5 HP - 200 Cy motors ea.). --Scraping Unit: Top & bottom, for thick PVC up to 5 mm radius. --Buffing Unit: Top & bottom (0.33 HP - 2,800 RPM motors) with remote in/out positioning by air cylinders. --Hot Air Heating Unit: For restoring color on scraped PVC edges.Complete With: --Single 42 FPM fixed feed speed, 1 HP drive; heavy 3/4" drive chain with chain pads traveling on round & flat tracks. -- Microprocessor for line control & glue temperature (can store up to 50 preset programs). -- Controls: Swivel control panel; motorized postioning of holddown beam; pneumatic positioning of super finish; full cover sound enclosure; 200 Cy - 5 kW frequency inverter w/automatic motor brakes for all HF motors.NOTE: Glue-pot has been changed (4) month ago, machine will require a new feed-chain with trackpads.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Ed Webb

800-374-5009 ext:377

View Seller's Entire Inventory and Information