2005 I D M ACTIVA 1-78 Edgebander$25,000

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Ed Webb

800-374-5009 ext:377

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139181.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139182.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139183.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139184.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139185.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139186.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139187.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139188.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-0139189.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391810.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391811.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391812.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391813.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391814.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391815.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391816.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391817.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391818.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391819.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54714&FILE=THMB_EU-01391820.jpg" />


EQUIPMENT DETAILS


  • Year:2005
  • Make:I D M
  • Model:ACTIVA 1-78
  • Location:WEST COAST,
  • Stock Number:EU-013918

 

EQUIPMENT DESCRIPTION

 

TWO (2) For The Price of ONE! IDM ACTIVA 1-78 ... Automated, Heavy Production EdgebandersSeller has (2) identical, "working" ACTIVA 1-78 machines and needs the space! Capacity:Edge thickness coiled, min/max. 0.3 mm - 3 mm; Strip material max. 20 mm (3/4"). Panel thickness, min/max. 10 - 60 mm (3/8" - 2-3/8"), min. panel width 60 mm (2-3/8") & min. 150 mm (5-15/16") panel length.Front-End Equipped With: -- In-Feed Fence, adjustable with pre-positioning by pneumatic air cylinder and digital indicator to determine pre-milling cutting depth.verhead beam mounted -- Pre-Milling Station: With 2 x 3 HP - 12,000 RPM counter rotating vertical milling heads (w/used Diamond Tooling), both w/pneumatic jump control, 30 mm spindles and SIKO digital readouts for setup & adjustments -- Heating Zone: Quarz heating section to pre-head the panel edge for max. edge adhesion to panel. -- Strip / Coil Magazine: Automatic edge-feed magazine with 3 mm PVC guillotine (9" pack cap. for strips); -- Gluing System: EVA (Hot Melt) overhead granular glue "Quick Melt" hopper feeding compact size, teflon coated lower applicator glue pot with 8.8 lbs. capacity, 1" dia. glue applicator roller, reversible rotation by flip of switch. -- Pressure Section: With (1) large dia. (7-7/8") clutch controlled drive roller and (3) jump action, pneumatic pressure idle rollers, and horiz. adj. via programmable servo motor and manual digital indicator. -- End Trimming Sation: Overhead, beam mounted front & rear end trimming, (2 x 0.8 HP - 14,400 RPM motors), motors tilt 0ø - 12ø on horiz. plane, 2nd blade position allows 45ø chamfer cut, bevel adjustment can be activated from the PLC with (2) pre-set positions. -- Flush/Rough Pre-Trimming Station: Top & bottom (2 x 2.5 HP - 12,000 RPM motors), motors have electronic braking, and mechanical digital readouts. -- Fine/Bevel/Radius Trimming Station: Top & bottom, (2 x 1.5 HP - 12,000 RPM motor), tilt 0° - 45°LCD for bevel and 3 mm PVC, with y-axis (horizontal in/out) servo positioning, pneumatics and mechanical digital readouts. -- Corner Rounding Station: Four (4) motor front/back - top/bottom corner rounding for up to 3 mmm thick pvc or solid wood edge material. -- Scraping Unit: Top & bottom scrapers for up to 5 mm thick PVC banding, pneumatic pressure over oil control for scraping knives, digital readouts, overhead PVC collection box eliminates PVC chips being sucked in by dust collector. -- Buffing Unit: Top & bottom oscillating ( 2 x 0.5 HP - 1,680 RPM motors), units tilt 0ø - 30ø. -- Edge Re-Activation Unit: Top & bottom for restoring PVC edges color luster & edge surface smoothing, LEISTER (2) hot air blower with temperature adjustment.Controls:Tech Mark Controller: PLC Microprocessor with large LCD displays screen for easy graphical interpase programming, manual on/off workstation sequence & trouble shooting diagnostic; data input by soft-keypad; microprocessor adjusts according to stored programs or input; (100) programs avail

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Ed Webb

800-374-5009 ext:377

View Seller's Entire Inventory and Information