2004 Woodstorm LR-100 Moulder$19,900

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Mark Green

800-374-5009 ext:332

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131181.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131182.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131183.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131184.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131185.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131186.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131187.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131188.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-0131189.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-01311810.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-01311811.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-01311812.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-01311813.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49730&FILE=THMB_MF-01311814.jpg" />


EQUIPMENT DETAILS


  • Year:2004
  • Make:Woodstorm
  • Model:LR-100
  • Location:MID ATLANTIC,
  • Stock Number:MF-013118

 

EQUIPMENT DESCRIPTION

 

WOODSTORM L100 Lateral Chain Moulder Infeed for feed through moulders. The "L100's" cap. 3' - 16' long, 3/8" - 3-1/2" thick and 3/4" - 9-1/2" width; feed speeds of 20 - 120 FPM via inverter controlled drive to (2) bottom rollers. -- The feeder consists of 38" deep x 12' long lateral feeding (8) chain deck, a top & bottom roller infeed system, and a short bridge table that connects the chain deck to the Moulder. The 1st upper roller is controlled by a proximity sensor and adjustable timing device. The pinch roller setup propels each workpiece to the drive roller combination; driving the piece toward the Moulder. The upper urethane rollers are pneumatically controlled in order to handle differences in workpiece thickness. -- The chain Deck lateral transport system chains tracking on UHMW wear strips for maintenance-free operation. -- A separate 10 HP motor with variable speed control provides power and control to the chains. -- The chain deck comes with dual mode operation, the operator can chose to have the chain deck run continuously or "on-demand" mode the chain deck is controlled by the system's PLC through the pinch roller sensor and runs only when a workpiece is needed. -- Includes: Filter, regulator, lubricator for pneumatic system, and short bridge table to connect to moulder; machine is delivered "plug-and-play" ready for immediate duty. After alignment to your Moulder, simply hookup power and air to the control panel. .

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Mark Green

800-374-5009 ext:332

View Seller's Entire Inventory and Information