2004 Weinig POWERMAT-2020/018 Moulder$149,500

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Mark Green

800-374-5009 ext:332

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131551.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131552.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131553.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131554.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131555.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131556.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131557.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131558.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-0131559.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-01315510.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-01315511.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54749&FILE=THMB_MF-01315512.jpg" />


EQUIPMENT DETAILS


  • Year:2004
  • Make:Weinig
  • Model:POWERMAT-2020/018
  • Location:EASTERN CDN,
  • Stock Number:MF-013155

 

EQUIPMENT DESCRIPTION

 

WEINIG POWERMAT 2020/010 Moulder Feed Through (Jointed High Speed) 6-Head (B-R-L-T-T-B), 230 mm x 120 mm (9-1/16" x 4-3/4") capacity. -- Head sequence: Bottom 15 HP (11kW), right 20 HP (15 kW), left 20 HP (15 kW), top 40 HP (30 kW), top 40 HP (30 kW) and bottom 25 HP (18.5 kW) motor. Amp meters for all spindle motors. -- All motors with brakes on feed and spindle motors. -- Powerlock toolholders: #1 - #6 with tool cutter speed of 10,000 RPM. Cassette Profile jointers on tools #2 - #6; Pedestal for all controls for operator set-up. All tool holders with high precision bearings. Jointer pre-setting stand included. -- Feed motor: 20 HP (15 KW) inverter controlled, feed rate of 18 to 260 FPM (6 - 80 MPM). -- Tool holders: Cutting circles: 8-7/8" on tool holders #2 - 6, with adjustable table plates to cutting circles. Chipbreaker at left and top tool holders pneumatic. Pressure shoe after second top spimdle split for profile applications. -- Tables: Infeed 1.2M (4'0") with (2) rollers above and (1) in the table.Table plates and fences hard chromed; (2) powered toothed rollers in machine bed: between top spindles and (1) at outfeed. Automatic Waxilit pump for table lubrication; central lubrication of lubrication points from front side of machine. -- Includes: Heavy duty sound and safety enclosure with electro magnetic interlocking of safety hood. Protection against backlash when splitting. Machine prepared for material handling.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Mark Green

800-374-5009 ext:332

View Seller's Entire Inventory and Information