2003 Centauro TA-F-EC Lathes and Carvers$52,650

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Tony Cornacchione

800-374-5009 ext:432

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46225&FILE=THMB_LC-0108061.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46225&FILE=THMB_LC-0108062.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46225&FILE=THMB_LC-0108063.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46225&FILE=THMB_LC-0108064.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=46225&FILE=THMB_LC-0108065.jpg" />


EQUIPMENT DETAILS


  • Year:2003
  • Make:Centauro
  • Model:TA-F-EC
  • Location:MIDWEST,
  • Stock Number:LC-010806

 

EQUIPMENT DESCRIPTION

 

CENTAURO TA-F-EC Automatic Copy Lathe with (2) Copiers and Hopper Feed.Electronic control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & pitches.General Specifications: -- 78.7" (2,000 mm) Max. between centers, 10 HP (15 kW) main motor, variable 0 - 4,500 RPM spindle speed; -- 1.5 HP (1.1 kW) Hydraulic power pack for programmable variable speed carriage with an advance rate of 0 - 98 FPM, carriage return speed of 98 FPM. -- Automatic work cycle turning, milling & fluting/spiral twisting for clockwise/counterclockwise and cross-milling with the required depth of pitches and programmable depth of cut. -- Up to (10) pass-depths; can program the complete turning cycle with (1 or 2) passes.Turning Specifications: -- 9-7/8" (250 mm) Max. copying/ milling with round billets and 6.9" (176 mm) with square billets. -- 5-1/2" (140 mm) Max. copying/milling with large steady rest & round billets and 4" (100 mm) with use of square billets. -- 3-1/2" (90 mm) Max. copying/ milling with small steady rest & round billets and 2-1/2" (65 mm) with small steady& square billets.Equipped with: -- Hopper feed, (2) Highly sensitive copying units which can machine simultaneously, with a max. stroke of 6" (150 mm) and (2) revolving steady rests (large or small). -- Hydraulic tailstock with controllable pressure, automatic workpiece centering system inter-linked to tailstock. -- Tailstock sleeve is 60 mm (2-3/8") with 100 mm (4") travel and 3/4" morse taper on tailstock center; hydraulic controlled spindle brake.Milling (Router) Unit consisting of: -- Electric spindle motor, 2.2 kW (3 HP) at 24,000 RPM controlled by "EM22" Electronic Control Unit which can be programed to run at 6,000/12,000/18,000 and 24,000 RPM according to cuttersize. -- The electric spindle has automatic feed and can be programmed up to (10) pass depths. -- Electronic control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & pitches; milling unit may be removed when not required.Complete with optional: Programmable 2nd automatic pass with a max. depth of 30 mm (1-3/16").

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Tony Cornacchione

800-374-5009 ext:432

View Seller's Entire Inventory and Information