2001 Homag KL 73/A3 Edgebander$23,400

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Karl Balg

800-374-5009 ext:355

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45982&FILE=THMB_EO-0121041.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45982&FILE=THMB_EO-0121042.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45982&FILE=THMB_EO-0121043.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45982&FILE=THMB_EO-0121044.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45982&FILE=THMB_EO-0121045.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=45982&FILE=THMB_EO-0121046.jpg" />


EQUIPMENT DETAILS


  • Year:2001
  • Make:Homag
  • Model:KL 73/A3
  • Location:PACIFIC NORTHWEST,
  • Stock Number:EO-012104

 

EQUIPMENT DESCRIPTION

 

HOMAG KL 73/A3 - SE-9300 ... Production EdgebanderWorking Capacity:0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM).Equipped with: -- Hot Melt Glue System "QA 34" # 2123: with reversible glue roller applicator; -- Edge Magazine HL-15 # 2435: Two (2) vertical coil magazine, coils 0.3 - 3.0 mm. -- Pressure Section # 2506: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses. -- HOMATIC "NC 21" Control System # 6202: Industrial PC and PLC programmable memory control system w keyboard, LCD 10.4" display and line control.Workstations: -- End Trimming HL 81 Unit # 3047: Light weight, high speed (2 x 0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel. -- Flush/Pre-Trimming Unit # 3201: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° angle adjustment, manual positioning with digital counters. -- Bevel/Fine-Trimming Unit # 3216: Top & bottom fine or bevel trimming 2 x 0.4 KW (0.5 HP), 12000 RPM motors, max. edge thickness 8 mm (5/16"), tilts 0 - 30° with manual digital counter positioning. -- Buffing Unit (Custom): 1st, top and bottom 2 x 0.25 kW - 2,850 RPM, incline and height adjustable with top pressure beam. -- Buffing Unit # 4402: 2nd, ocillating top and bottom 2 x 0.25 kW - 2,850 RPM, incline and height adjustable with top pressure beam.Complete with & Features: -- Electronic DC brakes on all trim motors; sound cabin for all workstations. -- Adjustable outboard panel support with swing out arms for up to 800 mm. -- 80 mm Feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations.U.S. Model Designation: SE-9300

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Karl Balg

800-374-5009 ext:355

View Seller's Entire Inventory and Information