2000 Homag KL 76/A20 Edgebander$23,995

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Ed Webb

800-374-5009 ext:377

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54713&FILE=THMB_EU-0139171.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54713&FILE=THMB_EU-0139172.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54713&FILE=THMB_EU-0139173.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54713&FILE=THMB_EU-0139174.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54713&FILE=THMB_EU-0139175.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54713&FILE=THMB_EU-0139176.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54713&FILE=THMB_EU-0139177.jpg" />


EQUIPMENT DETAILS


  • Year:2000
  • Make:Homag
  • Model:KL 76/A20
  • Location:MIDWEST,
  • Stock Number:EU-013917

 

EQUIPMENT DESCRIPTION

 

HOMAG KL 76/A20/S2 Edgebander with Pre-Milling. Capacity Specifications:0.4 - 20 mm Edge thickness cap., min. panel width 55 mm (2-3/16") for panel thickness 12 - 22 mm (1/2" - 7/8") and under; 100 mm (3.9") for panel thickness over 22 - 60 mm (7/8" - 2--5/16"); for up to 3 mm Coil stock, HPL, and strip stock up to 20 mm (3/4").Feed & Infeed Section of Machine: -- Pre-Milling Station with: (2) 4 HP - 150 Hz, 9,000 RPM Motors, panel blow off device. -- Top pressure beam with: Double-wide compound V-belts; Heavy Duty 80 mm wide feed track chain plates, vulcanized rubber insert pads, and Auto-Lube; variable feed speed from 18 - 24 MPM (59 - 79 FPM); 950 mm height/working level infeed, 2-position infeed fence (on/off), SIKO digital manual fence control. -- Edge Feeding device equipped with: automatic coil magazine for quick coil changeover; strip feeder for up to 20 mm (3/4") solid wood banding. -- "Quick Melt" Glue System with: Reversible glue roller applicator; pressure roll section with (1) large dia. driven and (6) pressure rollers; adjustment of pressure zone through SIKO digital counters for different edge thicknesses.Edgebanding Workstations: -- Double motor front & rear end trim, straight & chamfer trimming (0.8 HP - 12,000 RPM ea. motor). -- Top & Bottom flush trim (2 HP - 12,000 RPM ea. motor). -- Top & Bottom Profile trim (2 HP - 12,000 RPM ea. motor). -- Top & Bottom Buffing unit (two 0.33 HP - 1,650 RPM motors). -- HOMATIC "NC 21" Line Control with: Real-time "OS9" operating system, functions in Windows environment; PLC w/storage for (40) working programs, each with (160) functions for remote control of processing units; keypad w/LCD display, fault diagnostic, etc. Complete with: -- PLC controlled, motorized beam height adjustment; -- Servo adjustments on Top & Bottom flush trim, and servo controlled Scraper Stations. -- Electronic DC brakes on all trim motors, sound cabins for all trim workstations, and adjustable outboard panel support.Actual Model is HOMAG KL 76/A20/S2

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Ed Webb

800-374-5009 ext:377

View Seller's Entire Inventory and Information