1998 Homag KL 79/A20/S2 Edgebander$15,200 CDN

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Ed Webb

800-374-5009 ext:377

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139301.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139302.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139303.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139304.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139305.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139306.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139307.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139308.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-0139309.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393010.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393011.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393012.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393013.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393014.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393015.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393016.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393017.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54724&FILE=THMB_EU-01393018.jpg" />


EQUIPMENT DETAILS


  • Year:1998
  • Make:Homag
  • Model:KL 79/A20/S2
  • Location:EASTERN CDN,
  • Stock Number:EU-013930

 

EQUIPMENT DESCRIPTION

 

HOMAG KLK79/A20/S2 Edgebander with Pre-Milling and Corner Rounding -- 0.4 - 20 mm Edge thickness cap., min. panel width 55 mm (2-1/4"), panel thickness 12 - 60 mm, min. edge length 7.8" Workstations: -- Pre-Mill Station to clean the edge of the panel prior to applying the Edge Strip. -- Quick pre-melt glue pot, -- Pressure zone with (7) pressure rollers, -- End trims, -- T & B rough trim , --T & B Fine trim profile. -- 4-motor Corner Rounder, radius scrapers, hot air blowers, buffers.Controls: -- HOMATIC "NC 16" Line controller features: Real-time "OS9" operating system, functions in Windows environment; PLC w/storage for (40) working programs, each with (160) functions for remote control of processing units; keypad w/LCD display, fault diagnostic, etc. Equipped with: -- Automatic coil feed magazine for coil material up to 3 mm thickness, strip feed magazine for up to 20 mm (3/4") solid wood banding. -- "Quick Melt" glue system "QA 34" with per melt hopper feeder & roller applicator (reversible); -- Pneumatic pressure roll section with (1) large dia. driven & (6) idle rollers. -- Double motor front & rear end trim (0.7 HP - 12,000 RPM motor ea.), pneumatic chamfer setting; -- T & B rough trims (2 HP - 12,000 RPM motor ea.); -- T & B bevel & radius trims (0.6 HP - 12,000 RPM motor ea.), tiltable 0ø - 30ø; pneumatic exclusion from operator panel. -- T & B profile trim units for leading & trailing edge (four 0.6 HP - 12,000 RPM motors), up to 4 mm edge thickness, all trim station motors are 200 Cy HF and equipped w/electronic brakes. -- Glue scraping for T & B panel edge, -- T & B hot air blowers to reactivate edge color, -- T & B buffing unit w/oscillation control (0.3 HP - 1,650 RPM motors). -- Motorized top pressure beam with powered V-belt holddown, 80 mm wide Heavy Duty feed chain w/rubber pads, automatic chain track lubrication system, 5 HP feed drive for variable feed speed of 23 - 98 FPM. Complete with: -- SIKO Digital adjustments on top & bottom trim, fine trim, and scraper stations; -- 10 KVA - 300 Cy frequency converter, -- Electronic DC brakes on all trim motors, -- Sound cabins for all trim workstations, -- Adjustable outboard panel support with (4) floor supports.Note: there is a Doucet return conveyor included but there is no panel transfer from the edgebander to the return section

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Ed Webb

800-374-5009 ext:377

View Seller's Entire Inventory and Information