1997 Western Pneumatics 108 Jointer and Finger Jointer$108,800

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Jeff Terrill

800-374-5009 ext:349

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49716&FILE=THMB_FJ-0106331.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49716&FILE=THMB_FJ-0106332.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49716&FILE=THMB_FJ-0106333.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49716&FILE=THMB_FJ-0106334.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49716&FILE=THMB_FJ-0106335.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49716&FILE=THMB_FJ-0106336.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=49716&FILE=THMB_FJ-0106337.jpg" />


EQUIPMENT DETAILS


  • Year:1997
  • Make:Western Pneumatics
  • Model:108
  • Location:SOUTHEAST,
  • Stock Number:FJ-010633

 

EQUIPMENT DESCRIPTION

 

WESTERN PNEUMATICS HIGH SPEED FINGERJOINTER, COMPLETE AND INCLUDING: -- Model FJW248 LA-W Right & Left Shaper Section. - Cap.: 3/4" - 1-1/2" Max. thickness, 1-1/2" - 8" max. width, 5-1/2" min. - 48" max. length. -- Equipped with: (2) Scoring saws, 5 HP - 3,600 RPM motors,(2) trim saws, 7-1/2 HP - 3,600 RPM motors, (2) shaper motors, 20 HP - direct drive 3,600 RPM motors, 2-1/2" wide WESTERN feed chain with lugs on 9" centers, angle transfer conveyor with 15 HP AC variable speed drive with up to 150-lug per min speed with lugs on 9" centers, air bag pressure head with quick change feature & brush holddowns. -- APQUIP Extrusion Type Glue Applicator with meter mixing system. -- Model CTW242LA Corner Transfer to the assembly press via manual corner transfer. -- Model AIT4RA 12'Assembly Infeed Conveyor with ramp up/down, powered side alignment rolls, and dual top and bottom pre-assembly rolls. -- (1) Pair Model SCD248RA Side Trim Heads, each with 7-1/2 HP motor. -- Model FS224RA Flying Cutoff Saw. -- Model BP220RH Assembly Press: 24' with hydraulic squeeze board press and (3) 7-1/2 HP Retrim Saws. -- Automatic Cycling Outfeed: Feed speed varies automatically from 50 to 200 FPM, depending incoming block lengths. Pieces advance through the cutoff saw to a moveable limit switch and are cut to length with bottom mounted 7-1/2 HP Flying Cutoff Saw for continuous non-stop assembly, the cut to length piece drops down into a final squeeze chamber while the next piece is cut to length, finished lengths are pushed out by the next piece onto material outfeed arms. -- Includes: (2) sets of carbide insert heads, 4-wing and 8-wing and (1) set of high speed steel heads. -- All Manuals for Finger Jointer and the APQUIP Glue Applicator.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Jeff Terrill

800-374-5009 ext:349

View Seller's Entire Inventory and Information