1997 Heesemann LSM-8 Sander$69,995

Contact Information

 
  

EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270
Map ItPrint It

  

Joe Retzlaff

800-374-5009 ext:348

  

View Seller's Entire Inventory and Information

Contact Seller

  
 
 
 
 
   
 
By using this service, you accept the terms of LumbermenOnline.com Visitor Agreement.

Captcha
Click refresh if text is not readable.  
 
Enter the text exactly as it is shown above. 
 
  
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125781.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125782.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125783.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125784.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125785.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125786.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125787.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125788.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-0125789.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-01257810.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-01257811.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-01257812.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-01257813.jpg" />
< img u="thumb" src="../Handlers/ShowThumbnail.ashx?ID=54819&FILE=THMB_SX-01257814.jpg" />


EQUIPMENT DETAILS


  • Year:1997
  • Make:Heesemann
  • Model:LSM-8
  • Location:MIDWEST,
  • Stock Number:SX-012578

 

EQUIPMENT DESCRIPTION

 

HEESEMANN LSM-8 Wide Belt Sander (2) Heads --53" (1,300 mm) Width cap. (1) Segmented cross-belt & (1) longitudinal combination head with segmented platen --Head Configuration: --1st Head: Segmented cross-belt, 5/8" wide segments (86 total) with "CTS" control, abrasive belt size 5.9" x 244", (5,400 mm X 150 mm ) inside chevron belt 5.9" x 191", sanding belt speed 5-12 m/s with 17 HP motor. -- 2nd Head: Combination head, with segmented polishing platen, 5/8" wide segments with CTS control, 17 HP motor, 106" x 53" ( 2,620 mm X 1,350 mm ) abrasive belt size; --Equipped with & Features: --Outfeed rotary panel cleaning brush. -- All heads have HESSEMANN's patented "CTS" selective pressure adjustment system, sensors spaced every 5/8" (16 mm) sense part configuration; (2) mm part thickness variation can be sanded without sand throughs, pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if required. - The "CTS" computer control will hold approx. (20) programs or part configurations. -- Additional features: Outfeed rotary panel cleaning brush with single end adjustment, 2 HP motor, air blast abrasive belt cleaners on all heads. -- Variable feed speed from 13 to 82 FPM, 6.5 HP feed drive, motorized thickness opening 1/4" to 3-5/32" max.

SELLER'S RELATED INVENTORY

Seller Information

 
  


EX-FACTORY INC.

1805 Sardis Road N
Charlotte, NC 28270Map It

  

Joe Retzlaff

800-374-5009 ext:348

View Seller's Entire Inventory and Information