Weinig Moulders For Sale
Category
Moulders
Manufacturer
Weinig
29 Results Found
Call for Price
Weinig Powermat 500 Moulder MFG Specs: 460V; ELECTRONIC "SMART" BRAKES; POWERCOM+TOUCHSCREEN; MODEM FEED ELECTRONIC 7.5HP; #1:BOTTOM 10HP; 8000RPM; 1 13/16 SPINDLE; TABLE PLATES HARDENED B4 #2:RIGHT 15HP; 8000RPM; RAD ADJ; #3:LEFT; 15HP; 8000RPM; PRESS SHOE W/2 LATERAL PRESS ROLLERS SPR MT #4:TOP 25HP; 8000RPM; REC CB; TBL PLT FOR WOODEN INSERT; PROFILE GUIDE AFTER; PL #5:BOTTOM 20HP; 8000RPM; TABLES/FENCES CHROMED:INFEED TABLE 1050mm; 1 POWERED ROLLER ; MAN-WAX; CL LUBE ELECTRICS:EL CAB + OPERATOR PEDESTAL SEPARATE PRESSURE:FIXED PRESSURE ROLLERS ABOVE SPRING MTD; PRESSURE ROLLER AT INFEED SAFETY: SAFETY INTERLOCK; 1 LIGHT INSIDE ENCL; STRAIGHT EDGE;2 CLAMPING LENGTH 240 mm/ DIA 1 13/16"; GUIDE EDGE AFTER LEFT TOOL HOLDER;
Call for Price
$ 30,000
1996 Weinig Hydro-Mat 23 (6) head moulder w/ control station and hydraulic power unit, S/N 023-2386, (8) 9.5”, (6) 6 3/4”, and (19) 2.5” heads, all but (4) with knives (most 6 knives per head), includes head and knives currently installed on moulder w/ outfeed 18” C14.5 belt conveyor and drive w/ toolbox w/ misc. knives, templates for knife & other misc. W/ Weinig (9) strand infeed table S/N 314-LCF/16 w/ hydraulic power unit w/ blow, $20,000 without tooling (ref # 162) Call Amy for more information (928) 723-9449
Call for Price
Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room
Call for Price
This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw
$ 23,995
Call for Price
2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.
Call for Price
Call for Price
Weinig Powermat 400 Moulder HSK heads Radial and axial head controls Still under power and available for inspection.
$ 54,900
Call for Price
arrangement: B-R-L-T-T-B Power arrangement : 7.5KW-7.5KW-7.5KW-11.0KW-15.0KW-7.5KW Frequency-controlled feed system: 4.0KW 00502502) 5 - 30 m/min Power supply : 230V/60Hz (USA) Control voltage 1: 115V AC
$ 33,600
WEING U 23 E "STANDARD" Feed Through Moulder; (6) Heads, (B-R-L-T-B-U), working capacity 9-1/16" x 6" profiling. -- Head Sequence: Bottom 10 HP, right & left by 15 HP, top 15 HP, bottom 15 HP and universal 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM; mechanical digital readouts on spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. -- Tool cutting circles of 8-7/8", table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Feed motor 5 HP, variable speed from 18 - 118 FPM, overhead feed wheels with pneumatic pressure; (2) powered rollers in machine table. -- Infeed straightening table is 2 M (6-1/2') with adjustable fence & adjustable outfeed table; side pressure roller mounted to infeed table. -- Central lubrication, full sound/safety enclosure and manual bed lubrication pump. ALSO AVAILABLE: -- Weinig model 960 Grinder, sells new for approx. $35,000... Add $12,500 if purchased with the Moulder, -- CNC Template Maker, with scanner and DXF file capabilities, sells new for approx. $12,000... Add $3,500 if purchased with the Moulder.
$ 64,500
WEINIG Powermat 1000 6-Head Feed Trough Moulder(B-R-L-T-T-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 15 HP, Top 40 HP and universal 30 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements. -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM and universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement. -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- Electromagnetic interlocking of safety hood, automatic table lubrication pump and (2) lights inside reinforced sound enclosure; phone modem..
$ 36,500
WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132” x 64” x 64”Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00
$ 169,900
WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays
$ 11,800
WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.
$ 11,250
WEINIG 970 OPTICONTROL Powerlock Electronic Measuring and Display SystemSpecifications: -- Cutting Circle Dia.: 0 - 300 mm, Tool Length: 0 - 310 mm, Max. Measuring Width: 310 mm. -- Non-Contact measuring of tool dimensions radius and height and their indication on the electronic digital displays. -- Device is equipped with: projector for optical recording of measured values, electronic digital displays for tool radius and tool height. -- Complete with tool carrier for PowerLock tools, and prepared for PC connection.
Call for Price
Weinig Powermat 1000 Moulder - 8,000 rpm machine out of production 2/2024. Converted from 12,000 RPM. - Working cap.: 9-1/16” x 4-3/4” - Motors: B-15 HP, R-15 HP, L-15 HP, T-30 HP, T- 40 HP and B-30 HP. - Spindles/Tool Holders: Spindle 1-13/16" at 8,000 RPM; HSK tool holders 2-6 8,000 RPM. Motorized tool positioning for tools 2-6 Radial and Axial. - CNC: WEINIG Power Com "Touch Screen” PLUS software with tool data storage 300 profiles, profile data and tool monitoring. Led readouts to all spindles/tool holders; including chipbreaker’s and holddown’s. Modem for external diagnostics. - Feed: Variable inverter drive speed with 7.5 HP motor with speeds from 18-118 FPM. - Infeed/Tables: 2M (6'-6”) infeed table with side pressure roller, AUTO table lubrication and chromed tables and fences.
Call for Price
Call for Price
Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room