• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
6 Results Found for Hogs and Wood Grinders Viewing 1 - 6 of 6 results
STANDARD LISTINGS
VECOPLAN VH-18 Horizontal Wood Waste Grinder w/16' Vibratory Infeed ConveyorEquipped with: 18" Wide x 5" high infeed opening, 60 HP rotor motor with power belt drive. -- 15" Dia. rotor with (24) 4-way indexable, replaceable cutter knives, 1-piece counter bed knife, rotor/cutterhead grinding speed of 350 - 400 RPM. -- Features: Top & bottom infeed rollers, Heavy Duty Industrial Grade construction with stress-relieved shell & frame; Heavy Duty outboard roller bearings; separate electrical control panel with programmable logic controls. -- Complete with: Interchangeable screen (3/4" installed), 12" dia. collection outlet and 16' long vibratory infeed conveyor. -- New counterknife anvil installed, all teeth and pockets checked. Two sided of teeth already used, 2 side are still good with a few exceptions where there are on 3rd edge. -- Up to 3,000 Lbs/Hr capacity, depending upon species and moisture content.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
VECOPLAN VAZ 2000 M-N SP Wood Waste Grinder Heavy-duty, Single shaft, high output "TorsionPoint" cutting rotor. Low speed / High torque design with low RPM and noise. Heavy Spherical Roller Bearings in a stress-free frame that is robotically welded. Specifications: -- Machine In-feed Opening 78" x 78" -- Hopper Volume 11.9 cu/yds --Rotor Diameter 25" -- Number of Cutters 186, 4-way indexable -- Rotor Speed 30 - 200 RPM via Speed Master Drive -- Drive Motor 200 HP, Heavy-duty Direct Drive -- Precision Hydraulic Process Ram with 12.5 HP, 2-speed -- Includes: Bridge Breaker and Tramp Metal Options, PLC Control Panel and LED Monitoring -- Does not include complete discharge set-up.New machine, still in the crate!
Equipment Location:MIDWEST
Jim Reedy
800-374-5009 ext:455
VECOPLAN RG 32/20 Z Shorty, Low Noise Single Shaft Waste Grinder; 32" x 30" Opening Waste Grinder with 35" height vertical hopper (1.5 cub. yard cap.), 20 HP rotor motor. -- Equipped with: 6" Dia. and 27-1/2" length rotor with (15) indexable, replaceable cutter knives, rotor/cutterhead grinds at approx. 235 RPM. -- Hydraulic pusher ram with 1.0 - 1.5 HP two-speed pump motor, separate electrical control panel with push button controls, 80 DBA noise level; 8" dia. chip outlet. -- Interchangeable screens to produce chips from 3/8" to 1" in size available (3/4" screen currently installed), handles 1,000- 1,200 Lbs/Hr depending on product mix. -- Side mounted electrical & operator control panel.
Equipment Location:SOUTHEAST
Jim Reedy
800-374-5009 ext:455
VECOPLAN RG 32/20 Z Shorty, Low Noise Single Shaft Waste Grinder; 32" x 30" Opening Waste Grinder with 35" height vertical hopper (1.5 cub. yard cap.), 20 HP rotor motor. -- Equipped with: 6" Dia. and 27-1/2" length rotor with (15) indexable, replaceable cutter knives, rotor/cutterhead grinds at approx. 235 RPM. -- Hydraulic pusher ram with 1.0 - 1.5 HP two-speed pump motor, separate electrical control panel with push button controls, 80 DBA noise level; 8" dia. chip outlet. -- Interchangeable screens to produce chips from 3/8" to 1" in size available (screen currently installed TBD), handles 1,000- 1,200 Lbs/Hr depending on product mix. -- Side mounted electrical & operator control panel.
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455
VECOPLAN VAZ 2000 M-N SP Wood Waste Grinder Heavy-duty, Single shaft, high output "TorsionPoint" cutting rotor. Low speed / High torque design with low RPM and noise. Heavy Spherical Roller Bearings in a stress-free frame that is robotically welded. Specifications: -- Machine In-feed Opening 78" x 78" -- Hopper Volume 11.9 cu/yds --Rotor Diameter 25" -- Number of Cutters 186, 4-way indexable -- Rotor Speed 30 - 200 RPM via Speed Master Drive -- Drive Motor 200 HP, Heavy-duty Direct Drive -- Precision Hydraulic Process Ram with 12.5 HP, 2-speed -- Includes: Bridge Breaker and Tramp Metal Options, PLC Control Panel and LED Monitoring.
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
VECOPLAN RG52-60-U Low Noise Grinder with Vertical Hopper FeedSpecifications: 52" x 58" opening, 60 HP rotor motor, power belt drive; 15" dia. high output "Torsion Point" cutting rotor with a (37) cutters. -- Rotor/cutterhead grinds at approximately 120 RPM fixed speed, average noise level 60 - 70 dbA; 4-way indexable, replaceable cutter knives. -- Features: Heavy Duty construction stress-relieved shell and frame, tramp metal protection, oversized gear box and Heavy Duty roller bearings. -- Complete with: Precision hydraulic "Process Ram" with a 10 HP 2-speed pump motor, fluid "TurboCoupling; monitored by programmable logic control feeding system; separate electrical control panel with push button controls. -- Includes: Inclined infeed conveyor; transformer to 600 volts. -- Teeth still have two turns left.
Equipment Location:EASTERN CDN
Jim Reedy
800-374-5009 ext:455