• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
10 Results Found for Moulder Viewing 1 - 10 of 10 results
RECENTLY ADDED
STANDARD LISTINGS
Cast Iron main frame to maximize stability & minimize vibration during operation for years of use. -- Fully enclosed sound hood with lift up door for easy set-up access. -- Adjustable infeed table w/fence for straigenting rough sawn material. -- Variable feed speed system with top driven rollers. -- All spindle adjustments except 1st bottom spindle with mechanical digital readouts. -- Left and top spindles with mechanical digi-set readouts. Chipbreaker and pressure element with mechanical digital readouts for accurate adjustment and precise settings. -- Complete with: 4' Infeed table length, Chromed table plates, fences and pressure shoes. Manual waxilit pump, Central lubrication of the machine from the front side. -- Includes: Operator/spare parts manuals and set up tools.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
4-Head Profile or "S4S" Moulder. with a 9" x 6" capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP motor. -- With radial and axial adjustments with mechanical digital readouts on important spindle adjustments. -- All spindles 40 mm dia. and with a 6,000 RPM cutterhead speed. -- Variable feed speed of 20 to 98 FPM, 4 HP feed drive motor. -- Powered feed rollers top and bottom. -- 6'6" Infeed straightening table with adjustable fence line. -- Chromed table plates and fence line. -- Centralized control panel. -- Full safety sound enclosure.
Equipment Location:EASTERN CDN
Bob Dykstra
800-374-5009 ext:378
SILVER SF5020AH Through Feed Moulder --5-Head (B-R-L-T-B), 8" x 4-3/4" working capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, bottom 15 HP motor; mono-block cast iron bed frame. -- All heads with radial & axial adjustments with mechanical digital readouts on spindle adjustments, all spindles 40 mm dia. at 6,000 RPM. -- Variable feed speed of 20 - 82 FPM, with 5 HP feed drive motor; (1) 5-1/2" dia. top, (1) 4" dia. & (1) 3-3/4" dia. bottom table rollers; 78" long infeed table; 1.5 HP power elevation motor for the feed beam. -- Infeed table 2M (6'-6"'), straightening table with adjustable fence line, chromed bed plates and fences. -- Complete with: Centralized control panel, chipbreaker, and full sound & safety enclosure. -- Moulder includes: Sealed safety enclosure for sound & dust proofing; variable feed speeds; each spindle driven by independent motor with powerful cutting; 6,000 RPM spindle speed ensures best finish; spindle adjustments concentrated at the front of the machine with digital counters to ensure fast and easy adjustments. -- Specially treated hard chrome tables for maximum durability of the worktable surface; short stock feeding device guarantees feeding of short parts; Cardan drive for the feed system ensures a powerful, accurate, long-life, and maintenance-free feed works. -- Pneumatic pressure regulator for feeding system ensures high feeding performance. -- Powered bottom feed roll to improve feeding performance; central pump ensures lubrication for the worktable and slides; centralized electrical control panel for convenient and fast machine operation. -- Also included: (1) Set cutterheads with straight insert disposable knives including (3) 200 mm long x 125 mm dia. x 40 mm bore, (4) 150 mm long x 125 mm dia. x 40 mm bore, and (2) 125 mm long x 125 mm dia. x 40 mm bore. -- Note: Machine built June/2006; offered with very little use. Currently NOT under power. -- Comes with heads.
Equipment Location:WEST COAST
Bob Dykstra
800-374-5009 ext:378
SILVER SF-5020AH Feed Through Moulder & Planer: 5-Head Moulder for "S4S" Planing. -- 8" Width x 4" height capacity. -- Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 15 HP, bottom 10 HP motor. -- With radial and axial adjustments with mechanical digital readouts on important spindle adjustments. -- All spindles 40 mm dia. at 6,000 RPM. -- Variable feed speed of 20 to 80 FPM, 4 HP feed drive motor. -- Powered feed rollers top and bottom. -- 6'6" Infeed straightening table with adjustable fence line. -- Chromed bed plates and fence line. -- Centralized control panel. -- Full safety sound enclosure.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
5-Head Profile or "S4S" Moulder. -- 9" Width x 6" Height capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, bottom 15 HP motor. -- With radial and axial adjustments with mechanical digital readouts on important spindle adjustments. -- All spindles 40 mm dia. at 6,200 RPM. -- Variable feed speed of 20 to 98 FPM, 4 HP feed drive motor. -- Powered feed rollers top and bottom. -- 6'6" Infeed straightening table with adjustable fence line. -- Chromed table plates and fence. -- Centralized control panel. -- Full safety sound enclosure.
Equipment Location:EASTERN CDN
Bob Dykstra
800-374-5009 ext:378
6-Head Profile or "S4S" Moulder. -- 8" Width x 4-3/4" Height capacity. -- Head sequence: Bottom 7.5 HP, right 7.5 HP, left 7.5 HP, top 10 HP, top 15 HP, bottom 10 HP motor. -- With radial and axial adjustments with mechanical digital readouts on important spindle adjustments. -- All spindles 40 mm dia. at 6,000 RPM. -- Variable feed speed of 20 to 78 FPM, 5-1/2 HP feed drive motor. -- Powered feed rollers top and bottom. -- 6'6" Infeed straightening table with adjustable fence line. -- Chromed table plates and fence line. -- Centralized control panel. -- Full safety sound enclosure.
Equipment Location:EASTERN CDN
Bob Dykstra
800-374-5009 ext:378
SILVER 6023AH Moulder Feed Through -- 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". -- Head sequence: Bottom 10 HP, top 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All spindles with mechanical digital readouts. -- Feed: Variable speed of 18 - 82 FPM, with 5 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed: Straightening table 2M (6'6"), with side pressure roller and table lubrication pump. -- Includes:: Operator/spareparts manuals, set up tools, centralized control panel, sound and safety enclosure.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
SILVER 6023AH Moulder Feed Through -- 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". -- Head sequence: Bottom 10 HP, top 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. All spindles with mechanical digital readouts. -- Feed: Variable speed of 18 - 97 FPM, with 5 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed: Straightening table 2M (6'6"), with side pressure roller and table lubrication pump. -- Includes::(6) heads with insertsOperator/spareparts manuals,set up tools,centralized control panel,sound and safety enclosure.
Equipment Location:EASTERN CDN
Bob Dykstra
800-374-5009 ext:378
SILVER 6023AH Moulder Feed Through;6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6". - Less than 1,500 Hrs of run time. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP and bottom 15 HP motor. -- Spindle dia. 40 MM with cutterhead speed of 6,000 RPM. All spindles with mechanical digital readouts. -- Feed: Variable speed of 18 - 97 FPM, with 5 HP feed drive motor. Powered feed rollers top and bottom. -- Infeed: Straightening table 2M (6'6"), with side pressure roller and table lubrication pump. -- Features: Centralized control panel, sound and safety enclosure. -- Includes: (5) Used heads with inserts, Operator/spareparts manuals.
Equipment Location:EASTERN CDN
Bob Dykstra
800-374-5009 ext:378
6-Head Profile or "S4S" Moulder. -- 9" Width x 6" Height capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP, top 15 HP, top 15 HP, bottom 15 HP motor. -- With radial and axial adjustments with mechanical digital readouts on important spindle adjustments. -- All spindles 40 mm dia. at 6,000 RPM. -- Variable feed speed of 20 to 98 FPM, 5.5 HP feed drive motor. -- Powered feed rollers top and bottom. -- 6'6" Infeed straightening table with adjustable fence line. -- Chromed table plates and fence line. -- Centralized control panel. -- Full safety sound enclosure.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378