• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
27 Results Found for Shavings Mill Viewing 1 - 20 of 27 results
RECENTLY ADDED
PREMIUM LISTINGS
Equipment Location:Aiken, SC
Hutto Wood Products
803-564-7173
2010 Jackson 36D-10HL Shaving Mill, 8' box, (2) 10" diameter, 10 knife heads with 50hp electric motors, includes controls, starters and hydraulic pump unit, 40' long x 2 strand log deck; 23' long pan type belt conveyor and 40' long concave type belt conveyor, 64,000 FOB
Equipment Location:Brooklyn, CT
Sigfridson Wood Products
860-774-2075
STANDARD LISTINGS
50HP motors (unbolted as this is heavy machinery) 5' box 3 head machine Hydraulic reservoir Oil cooler (3) knives per head Each head powered by 50HP motor 119.2/59.6 Amps 1770RPM Knife grinder included: sharpens blades of shaver The production rate on this machine should be around 50 cubic yards per hour This B&C Shaving mill is in working/running condition according to the seller and is ready to load! There are hydraulic units with this. There is a cylinder on the shaver infeed box that moves the box back and forth to help clear the blades and to keep the flow going. Great operation!
Equipment Location:WI
Carolina Machinery Sales, Inc
704-288-1904
Blue Diamond Shaving Mill Double Box System: Each box is 8'6" Long Each box has two heads with 10-knives per head This system is still installed and available for inspection.
Equipment Location:TX
Carolina Machinery Sales, Inc
704-288-1904
Motivated seller! Custom built Shavings Mill based on Jackson Lumber Harvester. Has an 8' box and 20' conveyor. 3 phase electric and all control panels are included. Make an offer!
Equipment Location:Tulsa, OK
Sawmill Exchange
713-729-6455
Two boxes: Approx size (per box) 8' Long x 34" Wide x 36" Deep Mill has (4) heads with 30 HP motors; (4) Knives on each head 34' Shavings conveyor wth motor 3-Strand infeed deck: 8' Wide x 20' long Hydraulic pack Control box Mounted on solid I-beam. Total length is approx 50'. Dual voltage Will do at least 20-25 yards per hour You can do different size shavings This mill has been removed from power and is ready to load. The seller had purchased this as their shaving business was starting to take off and then they lost a contract that made this equipment necessary. This mill is similar to a Blue Diamond shaving mill.
Equipment Location:MO
Carolina Machinery Sales, Inc
704-288-1904
Multi Specialty Product Machine, Forest Equipment Co. log cut off saw (chain type), (2) strand log conveyor w/ (1) drive sprocket w/ (1) strand of H-78 chain w/ (1) strand of H-78 chain off, approx. 18’ log trough w/ ladder-back chain, hydraulic motor & Ohio drive, bar type chain cut-off saw Hydro Saw Buck Model 1500,outfeed gravity rollcase or push off into shaver box, 4’ box type shavings machine, End log splitter, Exclusive Selling Agent "As Is Where Is"
Equipment Location:OH
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Douglas Prototype High Production 12 Head 27' Shavings Machine Complete. 30HP Electric Motors on Each Head
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Bidding on this item starts Tuesday, November 28, 2017 at 10:00:00 am CT.
Equipment Location:Cookeville, TN
Tays Realty & Auction LLC
931-526-2307
FARREY MACHINE WORK SHAVER UNIT -- This is a custom built shaving machine. -- It has 28" diameter x 42" wide cutter heads, which each hold (6) cutter knives. -- It has 42" wide x 48" deep x 8'6" long log box constructed of 1/2" thick plate steel which can accommodate 6,000 lbs. of 8' logs. -- The box is powered by a 40 HP electric motor that drives a hydraulic pack and a 10' x 4" hydraulic cylinder. -- The cutter heads are powered by a 75 HP electric motor. -- This unit weighs 14 tons and is controlled from a remote station
Equipment Location:SOUTHWEST
Michel Hamel
800-374-5009 ext:472
The MOST AFFORDABLE Shaving Mill! The Hutto Mini is easy on your wallet, hands free and puts out 3 to 5 yards per hour. Whether you own a large barn and need shavings or just tired of wasting excess scrap wood the MINI is right for you! IN STOCK NOW!! Hands Free - Completely Self-Contained Hydraulic System - 22 HP Honda Engine - 16" Wide, 3 Knife Head - 30" Box - Fully Automated - 3-5 Yards/Hour - Completely Self-Contained Hydraulic System - 16" Wide, 3 Knife Head - 30" Box - Infeed: Material Handling Equipment Built Custom for Each Mill! Outfeed: Conveyors Custom Built, 20' - 40' with stand, runs off machine's hydraulics
Equipment Location:Aiken, SC
Hutto Wood Products
803-564-7173
Hutto Shavings Mill. Box is 40" wide by 52" long. 2 cutting heads. each cutting head has 6 rows of knives. 75 HP motor, 3 phase runs head. 25 HP motor runs hydraulic. 230/460 v. Includes all starters, and 2 conveyors approx 10' and 18-20'. This is an older model machine but has had upgrades. Machine in use daily and can produce about 30 yards per hour.
Equipment Location:Columbia, SC
Sawmill Exchange
713-729-6455
(2) four knife heads 50HP motor 50HP hydraulic pack machine 3 Phase Can be converted over to PTO or gas if need be According to the seller, this Jackson Shaving Mill is in good condition and is just waiting for its new owner to come and pick it up...call now!!!
Equipment Location:KY
Carolina Machinery Sales, Inc
704-288-1904
JACKSON HARVESTER 30D-10H SHAVER MACHINE -- Model 30D-10H shaving machine with (2) 10" diameter cutter heads that are 30" wide and holds (8) 30" long cutter knives. -- The cutter heads are powered by a 60 HP electric motor. -- The 30" x 36" deep x 4' long log box is powered by a 3 HP electric motor with a variable speed drive box.
Equipment Location:SOUTHWEST
Michel Hamel
800-374-5009 ext:472
JACKSON HARVESTER 30D-10H SHAVER -- Jackson shaver model 30D-10H -- It has (2) 10" diameter cutter heads that are 30" wide and holds (8) 30" long cutter knives. -- The cutter heads are powered individually each by 15 HP electric motor with variable speed drive box
Equipment Location:SOUTHWEST
Michel Hamel
800-374-5009 ext:472
Jackson Shavings Mill Model 30D10HL & A Mellott Debarker w/ Take Away Conveyor System. It is located in RI. $67,500 Package Price.
Equipment Location:Castleton, NY
Vermeer Northeast
508-986-9084
Product No. 1868 4 1/2 Foot Box 30" Wide x 36" Deep 2 Head Cuts Both Ways PRICE: $20000 Machine Type: Shaving Mill Manufacturer: Jackson Model: D30-10 Year: Machine Location: Mid West
Equipment Location:Midwest
Keith Comeau
704-929-9122
NEWMAN "SS-24" SHAVING MILL -- 100 HP motor. -- Cutterhead 24" dia. x 14" width, (16) knife rows x (7) knives per row; total knives: 112. -- Feed system: (2) 5" Diameter feed rolls with positive feed tooth design allow infinitely variable speed throughout 20 FPM to 60 FPM range. -- Powered by a 3 HP motor with A.C. variable frequency controller. -- Feed opening 5" high x 13-1/2" wide, the length of material does not restrict feed. -- Production: (1) to (2) tons per hour (900 to 1,800 kg/hour) 7 to 15 cubic yards per hour. -- Complete with: 10 Feet feeding conveyor and extra knives.
Equipment Location:SOUTHEAST, AL
EX-FACTORY INC.
704-841-2001
NEWMAN WHITNEY LS-1044 SHAVING MILL -- Single 8 foot box -- (2) Cutter heads with 10 knives -- 75 HP motors -- Support structure -- Newman Knives sharpener Model 200, serial number 396
Equipment Location:WESTERN CDN
Michel Hamel
800-374-5009 ext:472
60HP motor on it (Optional 100HP motor available at slightly higher cost) New anvil Remote control stand Fully self contained electrical box This Newman Whitney SS-24 Shaving machinery is ready to load and the seller has confirmed that it is in good working/running condition.
Equipment Location:Monroe, NC
Carolina Machinery Sales, Inc
704-288-1904