• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
101 Results Found for Sharpening Equipment Viewing 1 - 20 of 101 results
RECENTLY ADDED
PREMIUM LISTINGS
Morbark Knife Sharpener, Works Great, 3 phase, Comes w/Inverter New over $14,000 Selling for $5,500 603-456-6029
Equipment Location:Warner, NH
A Jordan Land Clearing
603-494-1860
STANDARD LISTINGS
AKEMAT B 4 Face grinder for carbide saw blades from 2-3/4" to 28"diameter. Tooth kerf up to 3/4". Tooth pitch from 5/16" to 5" with rake angle from -10ø to +30ø. -- Infinately variable grinding speed, with a cycl time of 20 teeth/min with .66 KW grinding motor. -- Wheel speed of 28m/sec. using 6" grinding wheel with 20mm bore. -- Newer style magnetic clamping and electronic control card. -- Complete with owner's manual.
Equipment Location:SOUTHEAST
Mark Green
800-374-5009 ext:332
AKEMAT U 3 Automatic Topper Carbide Saw Grinder for carbide saws up to 28” -- Motor: 0.9kw grinding motor, new double bar slide for grinding spindle. -- Complete: With double bar slide saw carrier system, hydraulic infeed infinitely variable for one pass grinding method via DC drive over roller ball spindle. -- Programs: Twenty-four (24) built in programs including triple chip in one pass. Complete with full flood coolant with double filtering system and magnetic saw clamping. Machine has been completely stripped down and repainted. -- Includes: (9) piece centering collar set (1/2”, 5/8”, ¾”, 1”, 1-1/8”, 30mm, 1-1/4”, 1-3/8” and 1-1/2”) and 4 cams (150mm, 250mm, 350mm, 450mm) and set of tools and one diamond wheel.
Equipment Location:WEST COAST
Mark Green
800-374-5009 ext:332
AKEMAT U4 Topper Carbide Saw Grinder for blades from 6" to 32". Rebuilt in 2012. -- NC Programmable to 24 standard programs complete with NOAX industrial panel for storage. of all files. Stepper motor controlled both the Y & Z axis, with inverter driven X axis. -- Automatic indexing and hydraulic clamping. Hydraulic diameter adjustment by foot pedal. Allows for all varieties of knife grinding of tooth geometries of knife grinding. Saw blade dia. 150mm - 800mm, tooth kerf up to 10mm, tooth spacing 8mm-80mm, back clearance angle from 10-30 deg. and top bevel angle up to 45 deg. with 5" wheel. Features quick changeover time from face to top grinding application. -- Grinding motor 1.2 HP with reverse feature and external filtration.
Equipment Location:EASTERN CDN
Mark Green
800-374-5009 ext:332
AKEMAT U4 Topper Carbide Saw Grinder for blades from 6" to 32". Rebuilt in 2012. -- NC Programmable to 24 standard programs complete with NOAX industrial panel for storage. of all files. Stepper motor controlled both the Y & Z axis, with inverter driven X axis. -- Automatic indexing and hydraulic clamping. Hydraulic diameter adjustment by foot pedal. Allows for all varieties of knife grinding of tooth geometries of knife grinding. Saw blade dia. 150mm - 800mm, tooth kerf up to 10mm, tooth spacing 8mm-80mm, back clearance angle from 10-30 deg. and top bevel angle up to 45 deg. with 5" wheel. Features quick changeover time from face to top grinding application. -- Grinding motor 1.2 HP with reverse feature and external filtration.
Equipment Location:SOUTHEAST
Mark Green
800-374-5009 ext:332
Armstrong’s VariSharp CNC band saw sharpener features a two-axis CNC system to grind virtually all band saw tooth patterns used by sawmills today. Touchscreen control, industrial-grade Pentium computer, and brushless servo-driven ball screws replace the two-cam system previously used. With VariSharp, it's possible to sharpen saws you are using today, while you design those you will use tomorrow. Grinding parameters, including on/off the face, gullet depth, and number of grinding passes can be controlled by operator inputs on the touchscreen or manually as on a standard No. 4 sharpener. Grinding wheel rpm and teeth per minute are also touchscreen controlled. A powerful 2-hp grinding wheel motor and variable frequency drive provide optimum grinding performance. Features: Pentium 233 MMX PC control. Brushless servo system for long life and precision grinding control. Touchscreen control for easy operation and feedback about the sharpener, such as number of teeth sharpened per minute, and a picture of the tooth. On-board Armstrong tooth library with over 300 standard, VP, and VPD tooth patterns. New teeth or VPD patterns can be drawn or modified on screen and saved to the tooth library. DXF (Drawing Interchange File) export capability: the operator can download tooth parameters to a floppy disk that saw makers can use to produce the exact tooth pattern the operator has designed on the console. Larger 2 hp (1.3 kW) grinding wheel motor with grinding wheel speed control via the touchscreen. Constant power supply for the PC to minimize machine interruption. Complete control of machine speed. The operator can change the number of teeth sharpened per minute. On a freshly tipped Cobalt Chromium Alloy saw, it is possible to slowly grind the face and top of each Cobalt Chromium Alloy tip while quickly skipping over the rest of the tooth on the first grinding pass. Capacity to sharpen conventional constant pitch saws or repeating segments of teeth with variable pitch or depth, with up to ten teeth per segment. Air back feed units and StrongArm II power clamp are precisely timed via computer outputs. Step-by-step instructions will be available on demand through the touchscreen console to make it easy to train new operators. A detailed operator’s manual covering installation and machine operation is provided. Accommodates toothspace of 1.250" (32 mm) to 3.00" (76mm) The on-board Armstrong tooth library includes over 300 standard, variable pitch (VP) and variable pitch and depth (VPD) tooth patterns available on the touchscreen. Operators can view, modify, and save a single tooth, or a VP/VPD pattern with up to ten teeth in the segment. The tooth library will hold an unlimited number of tooth patterns. When ordering saws, saved patterns can be supplied from the library to the saw manufacturer for use in producing the exact tooth pattern. Machine specifications for a VariSharp are the same as for a conventional No. 4 Armstrong b
Equipment Location:Menominee, MI
Menominee Saw
906-863-2609
CNC circular saw Topper/Facer is designed to gring the tops and faces of triple chip, variable pitch and alternating top or face. -- An industrial-grade computor and touch scree interface give the operator complete control of all functions. Grinding parameter for up to 14 saws, 6" to 36" diameter, can be stored in memory for instant set up. -- Features: -- Pentium 233 MMX P.C. control. -- Touch screen for easy operation. -- Store memory for 20 different preset saw configurations. -- 20 different tooth patterns with up to 10 teeth in a pattern custom and specialty saws. -- Total control of stock removal. Tooth configuration, wheel lift off and grinding depth and speed. -- Totally encolsed, flood cooled (15 GPM). -- True circular feed, feed fingers travels in the same radius as the saw so it will not slide up or down the tooth as it indexes. -- No nee to adjust the faceplate for saw thickness. Simply enter the tooth thickness and the machine automatically calculates the correct offsets. -- Grinding wheel motor automatically reverses direction for right and left hand teeth. -- Specifications: -- Saw diameter: 6" to 36" (150 mm to 915 mm). -- Saw Eye diameter: 5/8' to 9 5/8". -- Maximum tooth width 0.300". -- Maximum carbide length: 9/16". -- Plate thickness: 0.035" to 0.180". -- Hook angle range: -20 to +40. -- Back angle range: 5 to 20. -- Top Bevel Angle Range: 0 to 45. -- Face Bevel Angle Range 0 to 15. -- Grinding wheel diameter: 6". -- Grinding wheel speed: 7158 SPFM @ 6" diameter. -- Motor 1 1/2 HP. -- Poly-V-Belt Drive. -- Air requirement: 80 PSI. -- Overall dimensionx: 73" X 81" X 44"
Equipment Location:ATLANTIC CDN
Mark Green
800-374-5009 ext:332
ARMSTRONG TYPE B SHAPER
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong Sharpener RH
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong Stretcher Roll
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong Stretcher Roller
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong #4 Stretcher Roll S/N 7367
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
ARMSTRONG AIR SWEDGE
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong 4D RH Band Saw Sharpener Serial# 11032
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
ARMSTRONG #54 CIRCLE BLADE Post SHARPENER
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
ARMSTRONG BAND SAW SWEDGE BENCH
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong Left Hand Band sharpener with Swage and stands
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong Post Grinder
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong #16 Circle Saw Sharpener Serial# 8274
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Armstrong #16 Circle Saw Sharpener
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351