Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 519 of 520
10395 Results Found
Sort By 
Call for Price

2023 Yanmar VIO 35PR Mini Excavator now in stock! - Powered by Tier 4 Final 24.4 HP Yanmar Engine - Zero Tail Swing - Smart Assist Technology featuring advanced telematics - Eco mode - Quick Change Attachments - PTO selector valve for operator efficiency - 24"" Trenching Bucket - Open ROPS Cab - Boom Lights - Straight Blade Call Quality Equipment & Parts today for more information!

 Lake City, Fl
Quality Equipment & Parts
386-833-5458
Call

Call for Price

Yaskawa Motoman UP50N Robot YR-UP50N-A00 Payload 50kg Control Box Teach Pendant Yaskawa Motoman UP50N Robot Type: YR-UP50N-A00 Payload 50kg

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Call for Price

Yates A20-12 Planer Infeed Deck Tilt Hoist 575 V Includes: Misc parts, heads and attachments for S4S and T&G. This system was removed from service this Spring. It is ready to load.

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Call for Price

 Portland, OR
Ellison Sales, Inc.
503-244-0161
Call

Call for Price

Yates American V60 52" Band Head Rig Line Bar. S/N 22098

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Call for Price

A20 YATES PLANER, Complete line w/16’ Trimmer

 Lafayette, AL
Abneyco Equipment LLC
706-590-3624
Call

$ 93,000

YATES AMERICAN A95 Planer Matcher - 20 knife machine. Features fabricated frame with 100 HP top head, 75 HP bottom head, setworks for top head and left side head, hydraulic powered feed rolls, removable heads on all spindles, dynamic press roll tensioning, PLC control, chromed and water cooled beds, electronic cutter head brakes, high capacity hydraulic pump unit, operators console, side head setup stand, spare top and bottom heads, motor control center.

 Waverly Hall, GA
Ben Jones Machinery
706-324-2604
Call

$ 10,500

Model B2360, 8"x15", 6 knife chrome bed plates included, head on machine and serval set of side heads and knifes, Good Condition. Call 717-527-9909 for more info.

Showcase Equipment
260-250-4645
Call

Call for Price

Yates American B-15 Helical Head Planer S/N 29658

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Call for Price

Used Yates American Model B-26, 24” Double Planer, 75HP top, 40HPBottom, top and bottom 10 knife cutterheads, on the fly top and bottom jointers, 3 phase 480volt electrics, slide out lower cutterhead, top fixed cutterhead, 3-3/4” thickness capacity, approx. 20HP hydraulic feed works, power bed raise and lower, sectional pneumatic chip breaker, top infeed/outfeed rubber rollers.

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

There are two of these systems available. They were recently removed from the current operation and available immediately.

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Yates American E-12 End Matcher System for tongue and groove flooring includes: Belt, Straight Line Blade, 3-blades, Infeed conveyor to end matcher, transfer conveyor from first machine to second machine, variable speed outfeed conveyor

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 3,900

18" x 8" Cap., 7.5 HP - 3,600 RPM direct drive motor, 4-knife 4-1/4" dia. cutterhead; 1/8" min. material thickness, 11" min. unbutted stock length, 3-1/4" min. butted stock length. -- 24" x 40" Cast iron table bed, manual raise-and-lower on (2) 1-1/4" dia. hoist screws; belt drive feed system, variable speed 25 - 70 FPM; (2) 4" dia. powered upper rollers with a sectional top in feed roll, (2) 4" dia. bed rollers, and sectional chipbreaker. -- Includes: Magnetic starter controls, pressure bar & shaving hood. --Smooth running Heavy duty machine.

Ed Webb
800-374-5009 ext:377
Call

$ 44,700

YATES AMERICAN B-26 Top & Bottom Rough Lumber Planer24" x 4" Opening cap., 3/4" to 4" thickness capacity; 46" minimum unbutted length capacity;Specifications: -- (1) 75 HP DMD motor power hoisted top head, (1) 40 HP DMD motor bottom head, 8" dia. cutting circle at 3,450 RPM. -- 40 HP Hydraulic power unit for variable feed rate from 75 to 400 FPM, 12" dia. Urethane tire top feed rolls, 12" dia. non-powered lower rolls. Equipped with: -- Carbide spiral cutterheads, automatic pressure bar release (hydraulically operated), hydraulic top & bottom headlocks, anti-lap bar device, air tensioned & released chipbreaker. -- Complete with: Built-in top & bottom jointers, dust hoods, electrically interlocked safety guards, and small remote operator's console.

Louis Sicotte
800-374-5009 ext:329
Call

Call for Price

Planer Head Set Up Stand

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 45,000

Yates-American A-20 planer. 4 sided with profile machine, 10" rolls. Includes 10 cylinder Detroit engine, belt drive assembly.

 Burlington, NC
MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
336-269-2284
Call

Call for Price

The seller has confirmed that this Yates American resaw was in working/running condition when it was pulled from production. It is ready to load! - Vertical resaw - All parts and blades included - Approximately 35 years old - 50-60HP - 440 amp

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

The frame is a massive, compact and solid casting which takes less floor space for its capacity The feed drive is built to stand up under the hardest kind of services The feed rolls are of such design that the advantages of the open side type of construction are combined with of the advantages of the inside The top and bottom head assemblies are of the most substantial construction The top head chip breaker is made of chilled cast iron section, each section being spring loaded and adjustable The side head spindles are short and of large diameter The side head chipbreaker moves in and out with the head and is also provided with an additional screw adjustment for close setting The bedding is continuous throughout the entire length of the machine

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 700

Yates American No 50 #20376 - Setup stand - Good condition Call 800-459-2148 for more info.

Showcase Equipment
260-250-4645
Call

Call for Price

Yuasa saw analyzer, great working condition comes with saw centers, magnifying camera and monitor.

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved