Equipment For Sale
10409 Results Found
Woodmaster mechanical single head notcher. Includes rebuilt 2 cyl Deutsch 34 HP diesel engine. Never used. Engine also not used since rebuild. 1700 stringers per hour. Call 800-459-2148 for more info.
$ 25,000
WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.
$ 7,500
Call for Price
Call for Price
SALE PENDING
2005 WOODSMAN 440 TREE CHIPPER 2,743 HOURS CAT ENGINE GOOD FEED CHAIN GOOD DRUM REMOTE CONTROL VERY GOOD CONDITION FINANCING AVAILABLE
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Sharpens the top, face, or V-notch of circular saws. Load monitor adjusts the feed rate Powered saw lift automatically places the saw at the correct position, reducing setup time. .
Call for Price
$ 2,100
WYSONG & MILES Edge Sander6" x 32" Graphite mocovered wooden platen, Double 8" x 34" tilting side tables, full 180ø steel end table, tilts and raises & lowers. --2 HP motor, direct drive motor.
$ 4,800
WYSONG & MILES 604 DOUBLE SIDED OSCILLATING EDGE SANDERDouble Sided Oscilating Edge Sander with 7.5 HP - 1,800 RPM TEFC motor; (2) 11" x 60" cast iron platens; 10" x 172" abrasive belt size, (150) oscillations/Min with 1/2" movement, 0.5 HP oscillation motor.Equipped with: -- (2) 11-1/2" x 62" Cast iron side tables and (1) cast iron end table; tables tilt 30° up & 45° down; 5" vertical table travel w/hand wheel adjustment, 5" lateral side table travel w/hand wheel adjustment, 4-1/2" lateral end table travel w/handwheel adjustment. -- 10" Dia. x 10-1/2" face direct drive pulley, 4-1/2" dia. x 10-1/2" idle pulley. Complete with: -- Magnetic controls with overload protection & dust hood with 4" dia. outlet.
$ 2,500
WYSONG & MILES NO. 303 COMBINATION DISK AND OSCILLATING SPINDLE SANDERThis machine is two in one. It features a 26″ disk sander with a 15″ X 34″ titling table (to 45 degrees) on one side. On the other you will find an oscillating spindle sander featuring a 24″ X 24″ tilting table (15 degrees forward and 35 degrees backward) with a 2″ X 8″ oscillating spindle. -- Power for each is provided via a 5 HP motor. A swing out arm holds a 2 gallon bucket to the side of the machine for small parts or waste. -- Machine is 220V/440V/3 Phase. -- The only repair we see is a braze on the motor mount which is a very old repair and does not effect machine operation. ● This fully functional machine has been fully cleaned and checked
$ 1,250
5 HP - 1,200 RPM motor, roller table size 32" x 84", horizontal travel stroke 38", adjustable height of table base from 26" to 35" via large hand wheel. -- Rubber-faced Aluminum Pullies 8-1/2" face x 16" dia., accepts 6" wide abrasive sanding belts, pulleys can be spaced to accommodate various belt & material sizes, belt loop travels over table with manual handwheel belt tension & tracking. -- Includes: Magnetic starter, dust hoods
$ 79,000
ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALRSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! Air Conditioner, Straight Travel Pedal, Air Ride Seat, Control Pattern Changer, 2016 US EPA Label, 9 ft 6 in Stick, Auxiliary Hydraulic Plumbing, Boom Check Valves, 32 in Triple Grouser Track Shoes, 24 in Digging Bucket
$ 79,000
ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! This machine has an operating weight of 50,706 lb, ground pressure of 7 psi, and 173 hp measured at 2100 rmp. The working range includes a max digging height of 37'7"", max dumping height of 22'2"", max digging depth 21'11"", max digging radius 32'7"", min swing radius of 11'7"". Some key features for this machine include the enclosed cab with heat and A/C, sir suspension seat, rear view camera, integrated control panel and large display screen. Shipping Not Included- Call For Pricing!
Call for Price
ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! This machine has an operating weight of 9,300 lb with 24 horsepower. The XE35U has a Yanmar engine meeting national Tier 4 emission standard. Some key features for this machine include auxiliary hydraulics, hydraulic thumb, and a quick coupler! Shipping Not Included- Call For Pricing!
Call for Price
ZERO SALES TAX FOR OUT OF STATE SALES! ZERO DEALERSHIP FEES! ZERO NONSENSE! ULTRA LOW RATE IN HOUSE FINANCING FOR BUSINESS AND INDIVIDUALS! This machine has an operating weight of 9,300 lb with 24 horsepower. The XE35U has a Yanmar engine meeting national Tier 4 emission standard. Some key features for this machine include auxiliary hydraulics, hydraulic thumb, and a quick coupler! Shipping Not Included- Call For Pricing!