You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
1356 Results Found for Woodworking Viewing 1 - 20 of 1356 results
RECENTLY ADDED
PREMIUM LISTINGS
The HBR - 300 features hydraulic wheel tensioning, inverter feed drive, powerful 30hp main motor, oil mist cooling system, and automatic electronic digital blade height setup. This machine is in excellent used condition and mechanically sound. Maximum material size 300 mm X 300 mm (12" x 12") Saw wheel motor: 30 hp Dust hood outlet diameter: 100 mm x 2 (4"x 2") Feeding motor: 1 hp with inverter Distance from blade to conveyor: 2-270 mm (5/64" - 10 5/8") Saw blade width: 50 mm (2") Saw blade length: 4980 mm (196") Saw blade speed: 25.4 M/s Conveyor belt size: 270 mm x 4200 mm (11" x 165") Feed speed (variable): 0-30 M/min (0-100 ft/min) Feed Conveyor Tilt: 30 Degrees Conveyor height from floor: 1016 mm (40") Saw wheel diameter: 700 mm (28") Blade lift servo motor: 0.5 hp
Equipment Location:Sterrett, AL
Smith Machine Works
205-620-4455 ext:120
Newly Reconditioned - Doucet LH Lateral Chain Feeder with 16' chain deck and hydraulic power unit for feeder rolls. Excellent like new - Used condition. $17,900
Equipment Location:Sterrett, AL
Smith Machine Works
205-620-4455 ext:120
2005 Weinig Powermat 500 Moulder With Chain deck and Roller Conveyor With Automated Pusher -5 Heads (8000RPM) -#1: 15 HP Bottom -#2 & #3: 15 HP Side Heads {BOTH HSK HEADS} (1 brand new Fence side head) -#4: 20 HP Top -#5: 20 HP Bottom (new spindle) -Extra Tooling -Cutter Heads -Spacers -HSK Tool Holders -Rolls -Planer Heads -Roller Conveyor with Chain Deck & Pusher Conveyor -Dimensions: 12 x 20 roller conveyor w/ pusher -Chain deck: 144” x 142” (6 plastic Chains) {Optional add-on: Newly Reconditioned Doucet LH Lateral Chain Moulder Feeder for infeed.} All units are in excellent used conditioned. Fully functioning infeed/outfeed moulder line.
Equipment Location:Sterrett, AL
Smith Machine Works
205-620-4455 ext:120
STANDARD LISTINGS
EMC EASY GLOSS Polishing Machine for CURVED & FLAT PANELS Suitable for high gloss lacquered wood panels, for polyurethane lacca or brilliant straight, equipped with (1) longitudinal oscillating brush General description of the machine: -- (1) longitudinal oscillating brush. -- Welded cage type frame, made in carbon steel. -- Motors positioned inside the machine frame. -- Motorized lifting & lowering of the working table.Working table: -- Working table dimensions 3,800 x 1,220 mm (150" x 48"), made of MDF. -- Working width 1,220 mm (4'). -- Stroke of working table adjustable from 100 to 2,600 mm (4" to 102"). -- Feed speed adjustable from min./max. 0,5 - 6 m/Min (1,6 - 19 FPM) inverter controlled. -- Workpiece locking system adjustable for multiple dimensions.Vacuum suction cups holddown system for curved parts: -- Vacuum suction cups of medium and large diameter. -- Accommodates convex and concave parts. -- High capacity vacuum pump, independent motor positioned inside the machine frame. -- High precision micro switch for set up of part size. -- Min. radius on concave panels R=155 mm. -- Exit angle approx. 70°.Brush: -- The brush is made of medium-soft pressed cotton rags. -- Brush diameter min./max. 250 - 350 mm (9-13/16"- 13-3/4"). -- Brush length 1,250 mm (49-3/16"). --Brush rotating speed adjustable from 100 to 1,000 RPM. -- Driven by 11 kW (15 HP) motor. -- Automatic brake.Brush oscillation data: -- Brush oscillation stroke: 30 mm (15 + 15 mm) - 1-3/16" (9/16" + 9/16"). -- Brush oscillation frequency: 0,5 Hz. -- Brush oscillation motor power 0,55 kW (0,75 HP).Thickness and "Z" movements: -- Total "Z" stroke 330 mm (13"). -- Feed speed of "Z" axis automatically controlled from 0,1 to 5 m/Min (3 - 16 FPM). -- Computer controlled lifting & lowering of working table, with high precision THK guides. -- Automatic brush wear control. -- Working height min./max. 0 - 295 mm (0 - 11-5/8") with brush diam. 250 mm (9-13/16"); 0 - 270 mm (0 - 10-5/8") with brush diam. 300 mm (11-13/16"); and 0 - 245 mm (0 - 9-5/8") with brush diam. 350 mm (13-3/4").Electronic programmable color TOUCH SCREEN display, 7" wide -- Centralized control unit with PLC technology (Power Logic Control). -- STN LCD (Liquid Crystal Color) Display 7" Touch Screen. -- Storage of 100 polishing programs -- Front protection against dust & moisture IP65.Software facilities: -- Automatic program sequence starting. -- Display report and reset of alarms. -- Display and control for panel thickness & working pressure. -- Graphic synoptic to facilitate programming.Centralized Control Cabinet: Check control panel; with integrated self-diagnostic alarm control. Table lifting-lowering thickness system electrically controlled. Automatic star-delta starter on polishing motor. Padlock on main switch. Independent overload protections. IP 54 protection against dust & moisture.Centralized Independent Pneumatic Control Cabinet: Pneumatic air filter with automatic water-dra
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC - BABY GLOSS ...Polishing Machine for FLAT PANELS Suitable for high gloss lacquered wood panels, for polyurethane lacca or brilliant straight; equipped with (1) longitudinal oscillating brush. General Machine Description: -- Working width of 650 mm (25-9/16"). 1-Side open so panels up to 1,300 mm (51-3/16") can be polished. -- (1) Longitudinal Oscillating Brush. -- Constant pass line machine 900 mm (35-7/16") from floor. -- Welded cage type frame, made in carbon steel. -- Motors positioned inside the machine frame. -- Easy & quick changing system for all polishing agents. -- Motorized lifting & lowering of the feed table.Feed System: -- Natural rubber conveyor belt, rectified, square negatives profile. -- Table dimensions: L x W: 825 x 650 mm (32-1/2" x 25-9/16"). -- X-Axis feed speeds adjustable by inverter and with automatic reverse feed. Feed speeds infinitely adjustable from 1.5 to 8 m/min (5 to 26 FPM). -- Total X-axis length with in- & outfeed support roller tables is 2,000 mm (78-3/4"). -- Working width of Y-axis: 650 mm Open side. -- Support roller table extensions are foldable to reduce space when not in use. Holddown System: -- Rubberized holddown rollers to keep the workpiece securely in place. -- Vacuum table system to hold small or slippery pieces, including fan, mounted under the feed table. -- Motor vacuum fan 1,1 kW (1.5 HP), controlled from electrical cabinet.Brush: -- Brushing unit inclined at 3°. -- Brush is medium-soft. -- Brush diameter max. of 250 mm (9-13/16"). -- Brush length of 670 mm (26-3/8"). -- Motor power is 2.2 kW (3 HP). -- Rotating speed is 960 RPM.Brush Oscillation Data: -- Brush oscillation stroke: 25 mm (12,5 + 12,5 mm) - 1" (1/2"+ 1/2"). -- Brush oscillation frequency: 0,5Hz. -- Brush oscillation motor power 0,37 kW (0,55 HP).Thickness: -- Thickness adjustable from 0 to 80 mm (0 - 3-1/8"). -- Axis movement with high precision screw, type TPN. -- Z-Axis up & down adjustment electrically controlled by push button. -- Double high precision numerical indicators for thickness; increments are in mm and tenth of mm.Control Cabinet: -- Counter and display for programming the number of product passes. -- Inverter adjustment control for variable feed speeds.Safety: -- CE compliant; European standard safety norms in compliance with 2006/42/EC - 2014/30/EC -- Automatic emergency stop and alarm display in case of: ° Electric motors overloading and dispersion ° Emergency detector for oversized material thickness.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
Extrema MXP-233 Roughing Planer, Double Surfacer, S/N 92005, 33” W x 8’ T, 50 HP Top Motor & 40 HP Bottom, Helical Carbide Tip Heads, Mounted Motor Controls, Exclusive Selling Agent "As Is Where Is"
Equipment Location:TX
Kittrell Sawmill Brokers and Appraisers
931-797-6284
25-1/2" x 8" cap., min. material length 16" and min. thickness 3/8"; max. depth of cut 1/2" each head; microprocessor controlled digital setup of part thickness. -- Equipped with: 50 HP Top & 40 HP bottom belt drive motors to STEALTH helical Spiral Cutterheads with (10) rows of carbide insert knives which rotate at 6,000 RPM. Cutterheads slide out of machine for easy knife replacement. -- Variable feed speed 30 - 117 FPM, powered by 5 HP gear & shaft drive with pneumatically controlled feed system to upper and lower sectional feed rolls. -- Infeed table is hard chrome plated & precision ground for maximum wear resistance. Powered raise & lower of bed table on (4) 8" dia. Heavy Duty columns via a 1 HP motor. -- Complete with: Electrical control & operator panel with motor load meters, central lubrication system, all manuals. -- NOTE: For 460-volt 3 phase operation add $300.
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349
EMC GIANT 1350 2RR Calibrating Sander with (2) Sanding Heads, Roller and RollerTop of the line Heavy Duty wide belt Sander from EMC. The series of GIANT machines are available in many configurations, including widths up to 87". Top and Bottom in-line machines and planer sander models are also available.Useful working width 1,350 mm (53"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8"). Head configuration:1st Head: Roller "R" Belts dimensions: 3,250 x 1,370 mm (128" x 54"). -- Roller diameter: 320 mm (12-5/8"). -- Roller rubber hardness 85 Shore, Constant control to any position with accuracy 0.02 mm. -- On-Off pneumatic piston, controlled from the electrical panel. -- Rotation: Against feed (clockwise). -- Motor power: 22 kW (30 HP). Automatic star-delta starter Rotating cutting speed: 21 m/Sec (99 FPS). Blower for the roller unit.2nd Head: Roller "R" Belts dimensions: 3,250 x 1,370 mm (128" x 54"). -- Roller diameter: 320 mm (12-5/8"). -- Roller rubber hardness 45 Shore, Constant control to any position with accuracy 0.02 mm. -- On-Off pneumatic piston, controlled from the electrical panel. -- Rotation: Against feed (clockwise). -- Motor power: 22 kW (30 HP) Automatic star-delta starter. Rotating cutting speed: 21 m/Sec (99 FPS). Blower for the roller unit.Feed system: -- Constant pass line, 900 mm (35.4") from floor (In-line machine). -- Vacuum bed, 4 kw for hold down of smaller parts, mounted inside the machine base. -- Idle table rollers support in infeed and outfeed. -- Rubber covered presser rollers, grooved. -- Variable feed belt speed, adjustable from 3 to 20 m/Min (9.8 - 65.6 FPM) Inverter Controlled. -- Large diameter screws on machined guides with columns and pistons. -- Automatic feed belt centering device.General Machine Features: -- Independent main motors. -- Analog ammeters, for each motor, on main control cabinet. -- Electronic motorized grit set system, control from touch screen for each working group.Electronic programmable color TOUCH SCREEN display, 7" widePLC with micro-processor of latest generation, modular and expandableConnection USB, RS232, Ethernet 10/100/1000Memory capacity: 100 working programs or moreGraphic synoptic to facilitate programmingSoftware facilities: -- Automatic motor sequence starting. -- Command, programming and display for all electronic pad functions. -- Command, programming and display for thickness. -- Command, programming and display for feeding. -- Command, programming and display for all inverters. -- Command, programming and display for selected groups. -- Command, programming and display for blowers, including compressed air saving function. -- Display report and reset of alarms (self diagnostic) with memory records.Options Included: -- Vacuum bed, 4 kw for hold down of smaller parts, mounted inside of the machine base. -- Telemetry for remote computer assistance. -- LED light inside the machine.Centralized Control Cabinet: IP 54 protection. Analog amm
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC GIANT 1350 TTKF Calibrating Sander with (4) Sanding Heads: (2) Cross Belts, Combination Head Roller/Pad, Superfinishing Pad.Top of the line Heavy Duty wide belt Sander from EMC. The series of GIANT machines are available in many configurations, including widths up to 87". Top and Bottom in-line machines and planer sander models are also available.Useful working width 1,350 mm (53"). Working thickness min./max. mm 3 - 160 (1/8" - 6-11/16").Head configuration:1st Head: CROSS PAD "75-L" Cross Belt Sanding Pad with electronically controlled segments: -- Sanding PAD segmented in (75) sections, electronically controlled. -- Width of the single element (section): 18 mm (7-1/16"). -- APC - Automatic Programmable Control and setting of the air pressure. -- Abrasive belt length: 7,350 mm (289-3/8"), Chevron belt length: 5,400 mm (212-5/8"). -- Abrasive belt width: 150 mm (5-15/16"), Chevron belt width:140 mm (5-1/2"). -- Main motor power: 15 kW (20 HP) with Electronic Inverter for variable abrasive belt speed from 3 - 24 m/Sec (9.8 - 78 FPS). -- Abrasive belt blower cleaner, with automatic on-off control.2nd Head: CROSS PAD "75-L" Cross Belt Sanding Pad with electronically controlled segments: -- Sanding PAD segmented in (75) sections, electronically controlled. -- Width of the single element (section): 18 mm (7-1/16"). -- APC - Automatic Programmable Control and setting of the air pressure. -- Abrasive belt length: 7,350 mm (289-3/8"), Chevron belt length: 5,400 mm (212-5/8"). -- Abrasive belt width: 150 mm (5-15/16"), Chevron belt width:140 mm (5-1/2"). -- Main motor power: 11 kW (15 HP) with Electronic Inverter for variable abrasive belt speed from 3 - 24 m/Sec (9.8 - 78 FPS). -- Abrasive belt "air jet" cleaner, with automatic on-off control.3rd Head: COMBINATION Unit "K", Belt dimensions: 2,620 x 1,370 mm (103" x 54"). -- Roller diameter: 250 mm (9-13/16"). -- Roller rubber hardness 85 Shore, Constant control to any position with accuracy 0.02 mm. -- Electronic PAD segmented in (75) section. -- Width of the single element (section): 18 mm (7-1/16"). -- APC - Automatic Programmable Control and setting of the air pressure. -- Rotation: Against feed (clockwise). -- Motor power:18,5 kW (25 HP) with Electronic Inverter for variable abrasive belt speed from 3 - 20 m/Sec (9.8 - 65 FPS). Automatic star-delta starter. -- Timed oscillating cleaning abrasive belt blower.4th Head: SUPERFINISHING PAD "F" Electronic PAD segmented in (75) sections. -- Belts dimensions: 3,250 x 1.380 mm (127-15/16" x 54-5/16"). -- Width of a single element (section): 18 mm (7-1/16"). -- APC - Automatic Programmable Control and setting of the air pressure. -- Electronic motorized roller pressure adjustment "grit-set system". -- Rotation: Against feed (clockwise). -- Timed oscillating abrasive belt "air jets" cleaning. -- Motor power: 18,5 kW (25 HP) with electronic inverter variable abrasive belt speed 3 to 18 m/Sec (9.8 - 59 FPS).Part/Panel Reading
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC EXPLORER 950 1K ... Wide Belt Sander with (1) Sanding Heads; Combination head roller/pad.Versatile, medium duty machine, ideal for cabinet shops etc.This is a demonstrator, only used for demos at machinery trade shows. Machine comes with full factory warranty and is not only available immediately, but has a great price tag too!Technical Data: -- Useful working width 950 mm (37"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Abrasive belt dimension (length) 1,900 mm (75") x (width) 970 mm (38"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Combination Roller & Pad: -- Roller diameter 125 mm (5"). Rubber covered roller, spirally grooved, with Shore hardness 85. ● Automatic abrasive belt grit compensation with "Grit-Set System". ● On/Off Selector control with pneumatic piston to select roller. -- Flexible sanding pad. Pneumatically activated. ● Quick Change System for removable pad with felt, rubber and graphite. ● Rotating cutting speed 17 m/Sec (55.8 FPS). Driven by 11 kW (15 HP) motor. Equipped with: ● Oscillating cleaning abrasive belt blower. ● Abrasive belts oscillation by means of electronic photocell sensor.Feed System: ● Working thickness min./max. mm 3 - 170 (1/8" - 6-6/16"). ● Motorized table lifting including fine adjustment, on 4 precision screws. ● Natural rubber conveyor belt, machined. Automatic feed belt centering device. ● Idle table rollers support in infeed and outfeed. ● Rubber covered presser rollers, grooved● Electronic digital display for working thickness; resolution 0.1 mm (0.004"). ● Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Centralized Control Cabinet: ● Control panel with self-diagnostics alarm control unit. ● Analog load meters on main control cabinet. ● Table lifting-lowering thickness system, electrically controlled. ● AUTOMATIC Delta - Star starter on main motor and IP 54 protection against dust & moisture. Centralized Independent Pneumatic Control Cabinet: ● Pneumatic air filter with automatic water-drain system. ● Pneumatic adjustment for "Grit set system". ● Pneumatic plant working without lubrication. ● Compressed air pressure 6 bar (85 PSI). ● IP 54 protection against dust & moisture. Safety Features: ● Anti-kickback infeed protection. ● Oversized parts infeed protection by swinging bar. ● Emergency push buttons front & rear. ● Automatic brakes on main motor. ● Automatic emergency stop and alarm displayUSA UL or Canada CSA Safety Features
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC EXPLORER 1100 SUPER 3RRK with TAMPICO Brush Roller... Wide Belt Sander with (3) Sanding Heads: Roller, Roller and Combination Head.Versatile, full options, medium duty machine, ideal for cabinet shops etc.Useful working width 1,100 mm (43"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer belt length of 2,200 mm (87").Head configuration:1st Head: Steel Roller "R" Belt dimensions: 2,200 x 1,120 mm (87" x 44"). Roller diameter: 142 mm (5-9/16"). On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power:18,5 kW (25 HP). Automatic star-delta starter. Rotating cutting speed: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.2nd Head: Rubber Roller "R" Roller diameter: 142 mm (5-9/16"). Shore hardness 65. On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power:11 kW (15 HP). Automatic star-delta starter. Rotating cutting speed: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.3rd Head: Combination Roller & Pad "K". Roller diameter 142 mm (5-5/8"). Rubber covered roller with hardness 45 Shore. On/off selector pneumatically operated. Roller pressure adjustment control & "Grit-set system" for grit compensation. Fine sanding pad is pneumatically controlled. Motor power 11 kW (15 HP) Rotating cutting speed: 17 m/Sec (55 FPS). Blower for abrasive belt cleaning.Electronic segmented Sanding Pad "CP" with 37 segments, each 29,7 mm wide (1-3/16"). Quick Change System for removable pad with felt & lamina. Rotating cutting speed 18 m/Sec (59 FPS). In connection with electronic reading bar at infeed with 37 segments.All heads use Abrasive Belt dimensions: 2,200 x 1,120 mm (87" x 44"). Abrasive belts oscillation by means of electronic photocell sensor.4th Position: TAMPICO Brush Roller, 150 mm (6").Feed system: -- MOBILE WORK TABLE. -- Vacuum table for small pieces, with 4 kW (5,5 HP) fan. -- Idle table rollers support in infeed and outfeed. -- Rubber covered presser rollers, grooved. -- Variable feed belt speed, adjustable from 3 to 17 m/Min (9.8 - 55 FPM) Inverter Controlled. -- Motorized table rise and fall including fine adjustment, on 4 precision screws. -- Automatic feed belt centering device.Machine management system: -- Electronic colour 7" Touch Screen control & display. PLC with micro-processor - CP0291. Connection for USB, RS232, Ethernet 10/100/1000. Storage capacity of 100 sanding programs. Front protection IP65 against dust & moisture. -- Command, programming & display of all electronic pad functions, thickness, feed, inverters, on/off selectors, and abrasive belt blowers.Visualisation report and reset of alarms. -- Telemetry for online support directly from EMC.Electronical Panel: -- Check Control Self Diagnostics with Alarm Control. -- Analog load
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EXTREMA XP-124TV Planer, Single Sided;Specifications: -- Solid cast iron construction. -- 15 HP Main drive motor. -- 1 HP feed motor, 20 to 70 FPM. -- 1/2 HP Elevation motor.Equipped with: -- Precision ground cast iron table w/motorized programmable adjustment. -- Scale & pointer readout for accurate thickness adjustments. -- "VECTOR" insert cutterhead with 4-sided inserts. -- Fixed feed speed setting for consistent stock removal. -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch and Emergency stop.Complete with: Operations manual, parts list & tool kit.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
EMC EXPLORER 1300 SUPER 1K ... Wide Belt Sander with (1) Sanding Head; Combination Head Roller/Pad.Versatile, medium duty machine, ideal for cabinet shops or other panel sanding application.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer abrasive belt length of 2,200 mm (87").TECHNICAL DATA: -- Useful working width 1,300 mm (51"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Abrasive belt dimension (length) 2,200 mm (87") x (width) 1,320 mm (52"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Head configuration:1st Head: Combination Roller & Pad. -- Roller diameter 142 mm (6"). -- Rubber covered roller with hardness 85 Shore. -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. -- Flexible sanding pad, pneumatically activated. With automatic timing control for pad, synchronized with feed speed, electronically controlled. -- Quick Change System for removable pad with felt, rubber and graphite. -- Abrasive Belt cutting speed 17 m/Sec (56 FPS). -- Driven by 11 kW (15 HP) motor. -- Air Jet Belt blower for abrasive belt cleaning, controlled by part size.Abrasive belt oscillation controlled by electronic photocell sensor.Feed System: -- Working thickness min./max. 3 - 170 mm (1/8" - 6-11/16"). -- Motorized table lifting including fine adjustment, on (4) precision screws. Natural rubber conveyor belt, machined. Automatic feed belt centering device. Electronic digital display for working thickness in 0.1 mm (0.004") micro increments. -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Centralized Control Cabinet: -- Control panel with self-diagnostics alarm control unit. -- Analog load meters on main control cabinet. -- Table lifting-lowering thickness system, electrically controlled. -- AUTOMATIC Delta - Star starter on main motor and IP 54 protection against dust & moisture. Independent Pneumatic Control Cabinet: -- Pneumatic air filter with automatic water-drain system. -- Pneumatic adjustment for "Grit set system". -- Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). IP 54 protection against dust & moisture. Safety Features: -- Anti-kickback infeed protection. -- Oversized parts infeed protection by swinging bar. -- Emergency push buttons front & rear. --Automatic brake on main motor. -- Automatic emergency stop and alarm displayOption: TAMPICO Cleaning Brush, 150 mm (6") diameter; system to be integrated into outfeed section . Please add ...$3,400USA UL or Canada CSA Safety Features
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
EMC EXPLORER 1300 2RK ... Wide Belt Sander with (2) Sanding Heads; Roller and Combination head roller/pad.Versatile, medium duty machine, ideal for cabinet shops etc.TECHNICAL DATA: -- Useful working width 1,300 mm (51"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Abrasive belt dimension (length) 1,900 mm (75") x (width) 1,320 mm (52"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Head configuration:1st Head: Steel Contact Roller -- Roller diameter 142 mm (6") -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. -- Motor power 11 kW (15 HP). -- Automatic Star-delta starter. -- Speed rotation: 18 m/Sec (59 FPS).2nd Head: Combination Roller & Pad. -- Roller diameter 142 mm (6"). -- Rubber covered roller with hardness 45 Shore. -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. Flexible sanding pad. Quick Change System for removable pad with felt, rubber and graphite. Rotating cutting speed 17 m/Sec (55.8 FPS). -- Driven by same main motor.Abrasive belts oscillation by means of electronic photocell sensor.Feed System: -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Motorized table lifting including fine adjustment, on 4 precision screws. Natural rubber conveyor belt, machined. Automatic feed belt centering device. Electronic digital display for working thickness; resolution 0.1 mm (0.004"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Centralized Control Cabinet: -- Control panel with self-diagnostics alarm control unit. -- Analog load meters on main control cabinet. -- Table lifting-lowering thickness system, electrically controlled. -- AUTOMATIC Delta - Star starter on main motor and IP 54 protection against dust & moisture. Centralized Independent Pneumatic Control Cabinet: -- Pneumatic air filter with automatic water-drain system. -- Pneumatic adjustment for "Grit set system". -- Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). IP 54 protection against dust & moisture. Safety Features: -- Anti-kickback infeed protection. -- Oversized parts infeed protection by swinging bar. -- Emergency push buttons front & rear. --Automatic brake on main motor. -- Automatic emergency stop and alarm displayOption: TAMPICO Cleaning Brush, 150 mm (6") diameter. Please add ...$3,400USA UL or Canada CSA Safety Features
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC EXPLORER 1300 3RRK ... Wide Belt Sander with (3) Sanding Heads; Roller, Roller and Combination head roller/pad.Versatile, medium duty machine, ideal for cabinet shops etc.TECHNICAL DATA: -- Useful working width 1,300 mm (51"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Abrasive belt dimension (length) 1,900 mm (75") x (width) 1,320 mm (52"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Head configuration:1st Head: Steel Contact Roller -- Roller diameter 142 mm (6") -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. -- Motor power 11 kW (15 HP). -- Automatic Star-delta starter. -- Speed rotation: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.2nd Head: Rubber Roller "R" Roller diameter: 142 mm (5-9/16"). Shore hardness 65. On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power:11 kW (15 HP). Automatic star-delta starter. Rotating cutting speed: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.3rd Head: Combination Roller & Pad. -- Roller diameter 142 mm (6"). -- Rubber covered roller with hardness 45 Shore. -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. Flexible sanding pad. Quick Change System for removable pad with felt, rubber and graphite. Rotating cutting speed 17 m/Sec (55.8 FPS). -- Driven simultaneously with 2nd head by same main motor. Blower for abrasive belt cleaning.Abrasive belts oscillation by means of electronic photocell sensor.Feed System: -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Motorized table lifting including fine adjustment, on 4 precision screws. Natural rubber conveyor belt, machined. Automatic feed belt centering device. Electronic digital display for working thickness; resolution 0.1 mm (0.004"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Centralized Control Cabinet: -- Control panel with self-diagnostics alarm control unit. -- Analog load meters on main control cabinet. -- Table lifting-lowering thickness system, electrically controlled. -- AUTOMATIC Delta - Star starter on main motor and IP 54 protection against dust & moisture. Centralized Independent Pneumatic Control Cabinet: -- Pneumatic air filter with automatic water-drain system. -- Pneumatic adjustment for "Grit set system". -- Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). IP 54 protection against dust & moisture. Safety Features: -- Anti-kickback infeed protection. -- Oversized parts infeed protection by swinging bar. -- Emergency push buttons front & rear. --Automatic brake on main motor. -- Automatic emergency stop and alarm displayOption: T
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC EXPLORER 1300 SUPER 3RRK ... Wide Belt Sander with (3) Sanding Heads; Roller, Roller and Combination head roller/pad.Versatile, medium duty machine, ideal for cabinet shops etc.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer belt length of 2,200 mm (87").TECHNICAL DATA: -- Useful working width 1,300 mm (51"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Abrasive belt dimension (length) 2,200 mm (87") x (width) 1,320 mm (52"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Head configuration:1st Head: Steel Contact Roller -- Roller diameter 142 mm (6") -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. -- Motor power 11 kW (15 HP). -- Automatic Star-delta starter. -- Speed rotation: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.2nd Head: Rubber Roller "R" Roller diameter: 142 mm (5-9/16"). Shore hardness 65. On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power:11 kW (15 HP). Automatic star-delta starter. Rotating cutting speed: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.3rd Head: Combination Roller & Pad. -- Roller diameter 142 mm (6"). -- Rubber covered roller with hardness 45 Shore. -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. Flexible sanding pad. Quick Change System for removable pad with felt, rubber and graphite. Rotating cutting speed 17 m/Sec (55.8 FPS). -- Driven simultaneously with 2nd head by same main motor. Blower for abrasive belt cleaning.Abrasive belts oscillation by means of electronic photocell sensor.Feed System: -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Motorized table lifting including fine adjustment, on 4 precision screws. Natural rubber conveyor belt, machined. Automatic feed belt centering device. Electronic digital display for working thickness; resolution 0.1 mm (0.004"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Centralized Control Cabinet: -- Control panel with self-diagnostics alarm control unit. -- Analog load meters on main control cabinet. -- Table lifting-lowering thickness system, electrically controlled. -- AUTOMATIC Delta - Star starter on main motor and IP 54 protection against dust & moisture. Centralized Independent Pneumatic Control Cabinet: -- Pneumatic air filter with automatic water-drain system. -- Pneumatic adjustment for "Grit set system". -- Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). IP 54 protection against dust & moisture. Safety Features: -- Anti-kickback infeed protection. -- Oversized parts infeed protection
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC EXPLORER 1300 SUPER 2RK with TAMPICO Brush Roller... Wide Belt Sander with (2) Sanding Heads: Roller and Combination Head.Versatile, full options, medium duty machine, ideal for cabinet shops etc.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer belt length of 2,200 mm (87").Head configuration:1st Head: Steel Roller "R". Spirally grooved. Roller diameter: 142 mm (5-9/16"). On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power:18,5 kW (25 HP). Automatic star-delta starter. Rotating cutting speed: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.2nd Head: Combination Roller & Pad "K". Roller diameter 142 mm (5-5/8"). Rubber covered roller with hardness 45 Shore. On/off selector pneumatically operated. Roller pressure adjustment control & "Grit-set system" for grit compensation. Motor power 11 kW (15 HP) Rotating cutting speed: 17 m/Sec (55 FPS). Blower for abrasive belt cleaning.Electronic segmented Sanding Pad "CP" with 43 segments, each 29,7 mm wide (1-3/16"). Quick Change System for removable pad with felt & lamina. Rotating cutting speed 17 m/Sec (55 FPS). In connection with electronic reading bar at infeed with 43 segments.All heads use Abrasive Belt dimensions: 2,200 x 1,120 mm (87" x 44"). Abrasive belts oscillation by means of electronic photocell sensor.3rd Position: TAMPICO Brush Roller, 150 mm (6").Feed System: -- MOBILE WORK TABLE. -- Vacuum table for small pieces, with 4 kW (5,5 HP) fan. -- Idle table rollers support in infeed and outfeed. -- Rubber covered presser rollers, grooved. -- Variable feed belt speed, adjustable from 3 to 17 m/Min (9.8 - 55 FPM) Inverter Controlled. -- Motorized table rise and fall including fine adjustment, on 4 precision screws. -- Automatic feed belt centering device.Machine management system: -- Electronic colour 7" Touch Screen control & display. PLC with micro-processor - CP0291. Connection for USB, RS232, Ethernet 10/100/1000. Storage capacity of 100 sanding programs. Front protection IP65 against dust & moisture. -- Command, programming & display of all electronic pad functions, thickness, feed, inverters, on/off selectors, and abrasive belt blowers.Visualisation report and reset of alarms. -- Telemetry for remote online support directly from EMC.General Machine Features: -- Analog ammeters, for each motor, on main control cabinet. -- Electronic motorized grit set system, control from touch screen for each head. -- Check Control Self Diagnostics with Alarm Control. -- Electronic raising and lowering of the table, thickness system, electronically controlled. -- Automatic Star/Delta switches on main motors. -- Independent Overload protection.Safety Features: -- Infeed front emergency swinging bar for oversized panels. -- Infeed protection anti-kickback device. -- Rear and front emergenc
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC EXPLORER 1300 SUPER 2RK ... Wide Belt Sander with (2) Sanding Heads; Roller and Combination Head Roller/Pad.Versatile, medium duty machine, ideal for cabinet shops or other panel sanding application.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer abrasive belt length of 2,200 mm (87").TECHNICAL DATA: -- Useful working width 1,300 mm (51"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Abrasive belt dimension (length) 2,200 mm (87") x (width) 1,320 mm (52"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Head configuration:1st Head: Steel Contact Roller -- Roller diameter 142 mm (6") -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. -- Motor power 11 kW (15 HP). -- Automatic Star-delta starter. -- Abrasive belt speed: 18 m/Sec (59 FPS). -- Air Jet Belt blower for abrasive belt cleaning.2nd Head: Combination Roller & Pad. -- Roller diameter 142 mm (6"). -- Rubber covered roller with hardness 45 Shore. -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. Flexible sanding pad. Quick Change System for removable pad with felt, rubber and graphite. Abrasive Belt cutting speed 17 m/Sec (55.8 FPS). -- Driven by same main motor. -- Air Jet Belt blower for abrasive belt cleaning.Abrasive belts oscillation controlled by electronic photocell sensors.Feed System: -- Working thickness min./max. 3 - 170 mm (1/8" - 6-11/16"). -- Motorized table lifting including fine adjustment, on (4) precision screws. Natural rubber conveyor belt, machined. Automatic feed belt centering device. Electronic digital display for working thickness in 0.1 mm (0.004") micro increments. -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Centralized Control Cabinet: -- Control panel with self-diagnostics alarm control unit. -- Analog load meters on main control cabinet. -- Table lifting-lowering thickness system, electrically controlled. -- AUTOMATIC Delta - Star starter on main motor and IP 54 protection against dust & moisture. Independent Pneumatic Control Cabinet: -- Pneumatic air filter with automatic water-drain system. -- Pneumatic adjustment for "Grit set system". -- Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). IP 54 protection against dust & moisture. Safety Features: -- Anti-kickback infeed protection. -- Oversized parts infeed protection by swinging bar. -- Emergency push buttons front & rear. --Automatic brake on main motor. -- Automatic emergency stop and alarm displayOption: TAMPICO Cleaning Brush, 150 mm (6") diameter; system to be integrated into outfeed section . Please add ...$3,400USA UL or Canada CSA Safety Features
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC EXPLORER 1300 SUPER 3RRK with TAMPICO Brush Roller... Wide Belt Sander with (3) Sanding Heads: Roller, Roller and Combination Head.Versatile, full options, medium duty machine, ideal for cabinet shops etc.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer belt length of 2,200 mm (87").Head configuration:1st Head: Steel Roller "R". Spirally grooved. Roller diameter: 142 mm (5-9/16"). On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power: 18,5 kW (25 HP). Automatic star-delta starter. Rotating cutting speed: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.2nd Head: Rubber Roller "R" Roller diameter: 142 mm (5-9/16"). Shore hardness 65. On/off selector pneumatically operated. "Grit-set system" for grit compensation. Constant control to any position with accuracy 0.02 mm. Rotation: Against feed (clockwise). Motor power:11 kW (15 HP). Automatic star-delta starter. Rotating cutting speed: 18 m/Sec (59 FPS). Blower for abrasive belt cleaning.3rd Head: Combination Roller & Pad "K". Roller diameter 142 mm (5-5/8"). Rubber covered roller with hardness 45 Shore. On/off selector pneumatically operated. Roller pressure adjustment control & "Grit-set system" for grit compensation. Motor power 11 kW (15 HP). Rotating cutting speed: 17 m/Sec (55 FPS). Blower for abrasive belt cleaning.Electronic segmented Sanding Pad "CP" with 43 segments, each 29,7 mm wide (1-3/16"). Quick Change System for removable pad with felt & lamina. Rotating cutting speed 17 m/Sec (55 FPS). In connection with electronic reading bar at infeed with 43 segments.Heads 2 + 3 use Abrasive Belt dimensions: 2,200 x 1,320 mm (87" x 52"). Abrasive belts oscillation by means of electronic photocell sensor.4th Position: TAMPICO Brush Roller, 150 mm (6").Feed System: -- MOBILE WORK TABLE. -- Vacuum table for small pieces, with 4 kW (5,5 HP) fan. -- Idle table rollers support in infeed and outfeed. -- Rubber covered presser rollers, grooved. -- Variable feed belt speed, adjustable from 3 to 17 m/Min (9.8 - 55 FPM) Inverter Controlled. -- Motorized table rise and fall including fine adjustment, on 4 precision screws. -- Automatic feed belt centering device.Machine management system: -- Electronic colour 7" Touch Screen control & display. PLC with micro-processor - CP0291. Connection for USB, RS232, Ethernet 10/100/1000. Storage capacity of 100 sanding programs. Front protection IP65 against dust & moisture. -- Command, programming & display of all electronic pad functions, thickness, feed, inverters, on/off selectors, and abrasive belt blowers.Visualisation report and reset of alarms. -- Telemetry for remote online support directly from EMC.General Machine Features: -- Analog ammeters, for each motor, on main control cabinet. -- Electronic motorized grit set system, control from touch scre
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EMC FLEXY 1350 2RF Finishing Sander with (2) Sanding Heads, Roller and Superfinishing PadUseful working width 1,350 mm (53"). Working thickness min./max. 3 - 180 mm (1/8" - 7-1/16"). Head configuration:1st Head: Roller "R" Belts dimensions: 2,620 x 1,370 mm (103" x 54"). -- Roller diameter: 250 mm (10"). -- Roller rubber hardness 85 Shore. Constant control to any position with accuracy 0.02 mm. -- Electronic motorized roller pressure adjustment "grit-set system". -- Rotation: Against feed (clockwise). -- Motor power: 11 kW (15 HP). Automatic star-delta starter. -- Abrasive belt cutting speed: 18 m/Sec (59 FPS). Oscillating abrasive belt blower for the roller unit.2nd Head: Super Finishing Pad "F" Electronic PAD segmented in (50) sections. -- Belts dimensions: 2.620 x 1.370 mm (103" x 54"). -- Width of the segmented element (section): 27.0 mm (1.06"). -- Rotation: Against feed (clockwise). -- Timed oscillating abrasive belt blower. -- Motor power: 11 kW (15 HP) with electronic inverter variable abrasive belt speed 3 to 18 m/Sec (9.8 - 59 FPS).Feed system:Constant pass line, 900 mm (35.4") from floor ● Idle table rollers support in infeed and outfeed ● Rubber covered presser rollers, grooved ● Variable feed belt speed, adjustable from 3 to 18 m/Min (9.8 - 59 FPM) Inverter Controlled ● Large diameter screws on machined guides with columns and pistons ● Automatic feed belt centering deviceGeneral Machine Features: -- Independent main motors. -- Analog ammeters, for each motor, on main control cabinet. -- Electronic motorized "grit set" system; control from touch screen for each working group (head).Electronic programmable color TOUCH SCREEN display, 10" wide ● PLC with micro-processor of latest generation, modular and expandable ● Connection USB, RS232, Ethernet 10/100/1000 ● Memory capacity: 100 working programs or more ● Graphic synoptic to facilitate programmingSoftware facilities: -- Automatic motor sequence starting. -- Command, programming and display for all electronic pad functions. -- Command programming and display for thickness, for feeding, for all inverters and for selected groups (heads). -- Command programming and display for blowers, including compressed air saving function. -- Display report and reset of alarms (self diagnostic) with memory records.OPTIONS INCLUDED:Vacuum bed, 4 kW Vacuum unit for holddown of smaller parts, mounted inside of the machine base.Centralized Control Cabinet: IP 54 protection against dust & moisture. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belt motors. Centralized Independent Pneumatic Control Cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI) Options Available: Tamp
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348