• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Edgebander Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
SCMI "S 212" Edgebander.Featuring: Edge thickness cap. 0.4 - 12 mm (1/2"), 3 mm PVC cap., min. working width 4-3/4"; panel thickness 10 mm min. and 55 mm (2") maximum. -- Hot Melt glue application system with booster system for immediate heat-up, and reverse glue applicator roller; guillotine for 3 mm PVC. -- Pneumatically controlled pressure section with (1) large drive and (3) idle rollers, all independently controlled. -- SCMI S 212 Workstations: Double motor end trim (1.3 HP - 12,000 RPM motor ea.), pneumatic adjustment for 0° - 15° chamfer cutting; top & bottom flush trim (2.5 HP - 12,000 RPM motor ea.). -- Top & bottom fine & radius trim unit (2.5 HP - 12,000 RPM motor ea.), Bevels from 0° - 30°, both top & bottoms have pneumatic plunge in/out feature controlled from controlled panel. -- Top & bottom PVC scrapers for 3 mm radius, pneumatic pressure control for scraping knives, digital readouts. -- Last Station: Top & bottom buffing (0.4 HP - 1,400 RPM ea. motor). -- Single feed speed of 40 FPM, 5 HP feed drive, automatic chain track lubrication; Hold down pressure beam with double row of hold down rollers, opens from 3/8" - 2-5/16". -- Complete with: Sound proof cabins w/windows & interior lights, Heavy Duty outrigger panel support w/counter pressure, 15 KVA frequency converter, and manuals.
Equipment Location:ATLANTIC CDN
Ed Webb
800-374-5009 ext:377
SCMI OLIMPIC S212 SINGLE SIDED EDGEBANDER0.4 - 12 mm (1/2"), 3 mm PVC cap., min. working width 4-3/4". Hot Melt glue application system with booster system for immediate heat-up, and reverse glue applicator roller. Guillotine for 3 mm PVC. Pneumatically controlled pressure section with (1) large drive and (3) idle rollers, all independently controlled. Workstations: Double motor end trim (1.3 HP - 12,000 RPM motor ea.), pneumatic adjustment for 0° - 15° chamfer cutting; -- Top & bottom flush trim (2.5 HP - 12,000 RPM motor ea.). -- Top & bottom PVC scrapers for 3 mm radius, pneumatic pressure control for scraping knives, digital readouts. -- Last Station: Top & bottom buffing (0.4 HP - 1,400 RPM ea. motor). -- Single feed speed of 40 FPM, 5 HP feed drive, automatic chain track lubrication; Hold down pressure beam with double row of hold down rollers, opens from 3/8" - 2-5/16". -- Complete with: Sound proof cabins w/windows & interior lights, Heavy Duty outrigger panel support w/counter pressure, 15 KVA frequency converter, and complete set of used tooling.
Equipment Location:GREAT PLAINS
Ed Webb
800-374-5009 ext:377
SCMI OLIMPIC S-212 EDGEBANDER WITH CORNER ROUNDING0.4 - 12 mm Edgebanding thickness, 10 - 55 mm Panel thickness, min. panel width 5", min. panel length 8", dual feed speed of 39 & 59 FPM. -- Automatic strip & coil feed magazine with 3 mm PVC guillotine, granular glue system, Teflon coated lower applicator glue pot; 1" Dia. glue applicator roller w/reversible rotation Pressure section; (1) Large dia. clutch controlled drive roller, (2) pneumatic pressure idle rollers; independent adjustment of drive & idle rollers; digital indicator. Equipped with: -- Front & rear end trim on THK Guides, (0.75 HP - 12,000 RPM) motors tilt 0° - 15° on horiz. plane. -- Top & bottom flush trims (0.8 HP - 12,000 RPM motor ea.). -- Top & bottom fine/radius trimmer (0.8 HP - 12,000 RPM motors), motors bevel 0° - 45°, digital readout for easy setup. -- 2-Motor corner rounding unit for trimming leading & trailing edges/corners for up to 3 mm PVC edgings, (0.5 HP - 12,000 RPM motors), each motor mounted on THK guides ensuring high quality finish with dust collection hoses, front & lateral copying devices. -- Top & bottom PVC scrapers for 3 mm radius, pneumatic pressure control for scraping knives, digital readouts. -- Top & bottom buffing (0.3 HP - 3,000 RPM motor ea.), units tilt 0° - 30°; -- Hot air blower to restore thick PVC color after scrape -- Feed chain with white rubber pads, dual feed speed of 39 & 59 FPM, with 3 HP drive. Complete with: Microprocessor for line control & glue temperature (can store up to 50 preset programs), swivel control panel; insulated sound enclosure w/large window area, rotating operator control panel at eye-level height, telescopic panel support, 200 Cy frequency inverter & used tooling. -- Actual Model is Olympic S-212-FR
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
SCMI OLIMPIC S 212 SINGLE SIDED EDGEBANDEREdge thickness cap. 0.4 - 12 mm (1/2"), 3 mm PVC cap., min. working width 4-3/4". Equipped with: Hot Melt glue application system with booster system for immediate heat-up, and reverse glue applicator roller. -- Guillotine for 3 mm PVC. -- Pneumatically controlled pressure section with (1) large drive and (3) idle rollers, all independently controlled.Workstations: Double motor end trim (1.3 HP - 12,000 RPM motor ea.), pneumatic adjustment for 0° - 15° chamfer cutting; -- Top & bottom flush trim (2.5 HP - 12,000 RPM motor ea.). -- Top & bottom fine & radius trim unit (2.5 HP - 12,000 RPM motor ea.), Bevels from 0° - 30°. -- Top & bottom PVC scrapers for 3 mm radius, pneumatic pressure control for scraping knives, digital readouts. -- Top & bottom buffing (0.4 HP - 1,400 RPM ea. motor). -- Single feed speed of 40 FPM, 5 HP feed drive, automatic chain track lubrication; Hold down pressure beam with double row of hold down rollers, opens from 3/8" - 2-5/16". -- Complete with: Sound proof cabins w/windows & interior lights, Heavy Duty outrigger panel support w/counter pressure, 15 KVA frequency converter, and complete set of used tooling.
Equipment Location:SOUTHWEST
Ed Webb
800-374-5009 ext:377