You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
1345 Results Found for Woodworking Viewing 1 - 20 of 1345 results
RECENTLY ADDED
PREMIUM LISTINGS
We purchased this machine NEW in 2017. It is in excellent used condition. The HBR - 300 features hydraulic wheel tensioning, inverter feed drive, powerful 30hp main motor, oil mist cooling system, and automatic electronic digital blade height setup.: Maximum material size 300 mm X 300 mm (12" x 12"): Saw wheel motor - 30 hp: Dust hood outlet diameter - 100 mm x 2 (4"x 2"): Feeding motor - 1 hp with inverter: Distance from blade to conveyor - 2-270 mm (5/64" - 10 5/8"): Saw blade width - 50 mm (2"): Saw blade length - 4980 mm (196"): Saw blade speed - 25.4 M/s: Conveyor belt size - 270 mm x 4200 mm (11" x 165"): Feed speed (variable) - 0-30 M/min (0-100 ft/min): Feed Conveyor Tilt - 30 Degrees: Conveyor height from floor - 1016 mm (40"): Saw wheel diameter - 700 mm (28"): Blade lift servo motor - 0.5 hp:
Equipment Location:Sterrett, AL
Smith Machine Works
205-620-4455 ext:120
Newly Reconditioned - Doucet LH Lateral Chain Feeder with 16' chain deck and hydraulic power unit for feeder rolls. Excellent like new - Used condition. $17,900
Equipment Location:Sterrett, AL
Smith Machine Works
205-620-4455 ext:120
Vacu-Clamp FP/C-10500 Membrane Press Description: 5'x10' Capacity - Working dimensions: 63" x 123"; Interior height 14" Platen: 3/4" Phenolic Membrane: .0625 Silicon Aluminum Frame Construction Heating Type: Quartz Tubes
Equipment Location:Riviera Beach, FL
Monte Cristo's of England
561-510-3651
2005 Weinig Powermat 500 Moulder With Chain deck and Roller Conveyor With Automated Pusher: -5 Heads (8000RPM): #1 - 15 HP Bottom: #2 & #3 - 15 HP Side Heads {BOTH HSK HEADS} (1 brand new Fence side head): #4 - 20 HP Top: #5 - 20 HP Bottom (new spindle): {Extra Tooling: -Cutter Heads -Spacers -HSK Tool Holders -Rolls -Planer Heads}: {Roller Conveyor with Chain Deck & Pusher Conveyor: Dimensions - 12 x 20 roller conveyor w/ pusher: Chain deck - 144” x 142” (6 plastic Chains)}: {Optional add-on: Newly Reconditioned Doucet LH Lateral Chain Moulder Feeder for infeed.} All units are in excellent used conditioned. Fully functioning infeed/outfeed moulder line.
Equipment Location:Sterrett, AL
Smith Machine Works
205-620-4455 ext:120
STANDARD LISTINGS
EXTREMA PERFORMA XS-2B-52 Wide Belt Sander (2) Heads -- 52" Width cap. Drum, Roller and platen --Head Configuration --1st Head: Contact drum 30 HP motor --2nd Head: Roller and Platen 30 HP --Features: --75” Belt Length --Available with 1 to 3 heads --Over thickness safety device --Infeed bed rollers --Digital thickness controller --Individual amp meters --Disc brakes on sanding heads --Telemecanique electrics --Camozzi pneumatics --Variable speed drive system --Mono-block construction to increase durability. --Specification: --Max. width cap 52" --Feed motor 3 HP --Elevation motor 0.5 HP --Max. thickness 6" --Min. thickness 1/8" --Contact drum 1st head 8" dia. --Roller drum on 2nd head 5" dia. --CFM requirements 4800 --Feed speeds 15-50 FPM --Belt size 52" X 75" --Weight 6500 lbs --AMPS (220 V / 460V ) 148/74.
Equipment Location:SOUTH
Joe Retzlaff
800-374-5009 ext:348
EXTREMA XS-3B37 Wide Belt Sander (3) Heads --3-Head, 36" width cap. Drum, Drum, Platen --Head Configuration: --1st Head: 8" Dia. rubber covered contact roll, 25 HP motor --2nd Head: 8" Dia. rubber covered contact roll, 25 HP motor; --3rd Head: Combination head with 4-7/8" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor. --Specifications: -- Height adjustment of both contact rolls with dial indicators -- 37" x 75" abrasive belts, OMRON solid-state abrasive belt tracking. -- 3 HP Variable feed drive of 15 - 50 FPM, -- GOODYEAR "endless belt" conveyor with automatic tracking, -- 0" - 6" max. motorized thickness opening with digital PLC control, keypad entry for thickness with LED readout, 0.5 HP motor, (4) 1" dia. screw jacks. --Equipped with & Features -- Infeed over thickness bar, infeed & outfeed spring loaded rubber covered holddown rolls on all heads. --Emergency stops at infeed & outfeed, air operated disc brakes on sanding heads, --Automatic opening of conveyor bed upon any emergency stop or shutdown.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
EXTREMA PERFORMA XS-3B-37 Wide Belt Sander (3) Heads -- 37" Width cap. Drum, Drum Roller and platen --Head Configuration --1st Head: Contact drum 25 HP motor --2nd Head: Contact drum 25 HP motor --3rd Head:Roller and Platen combination head 20 HP --Features: --75” Belt Length --Available with 1 to 3 heads --Over thickness safety device --Infeed bed rollers --Digital thickness controller --Individual amp meters --Disc brakes on sanding heads --Telemecanique electrics --Camozzi pneumatics --Variable speed drive system --Mono-block construction to increase durability. --Specification: --Max. width cap 37" --Feed motor 3 HP --Elevation motor 0.5 HP --Max. thickness 6" --Min. thickness 1/8" --Contact drum 1st and 2nd head 8" dia. --Roller drum on 2nd head 5" dia. --CFM requirements 5400 --Feed speeds 15-50 FPM --Belt size 37" X 75" --Weight 6850 lbs --AMPS (220 V / 460V ) 184/92
Equipment Location:SOUTH
Joe Retzlaff
800-374-5009 ext:348
EXTREMA PERFORMAXS-3B-43 Wide Belt Sander (3) Heads --43" Wide Belt Sander Drum, Drum, Combination head --Head Configuration --1st Head: Contact drum 30 HP motor --2nd Head: Contact drum 30 HP motor --3rd Head:Roller and Platen combination head 25 HP --Features: --75” Belt Length --Available with 1 to 3 heads --Over thickness safety device --Infeed bed rollers --Digital thickness controller --Individual amp meters --Disc brakes on sanding heads --Telemecanique electrics --Camozzi pneumatics --Variable speed drive system --Mono-block construction to increase durability. --Specification: --Max. width cap 43" --Feed motor 3 HP --Elevation motor 0.5 HP --Max. thickness 6" --Min. thickness 1/8" --Contact drum 1st and 2nd head 8" dia. --Roller drum on 2nd head 5" dia. --CFM requirements 6300 --Feed speeds 15-50 FPM --Belt size 43" X 75" --Weight 7500 lbs --AMPS (220 V / 460V ) 220/110.
Equipment Location:SOUTH
Joe Retzlaff
800-374-5009 ext:348
EXTREMA PERFORMA XS-3B-52 Wide Belt Sander (3) Heads --52" Wide Belt Sander Drum, Drum, Combination Head --Head Configuration --1st Head: Contact drum 30 HP motor --2nd Head: Contact drum 30 HP motor --3rd Head:Roller and Platen combination head 30 HP --Features: --75” Belt Length --Available with 1 to 3 heads --Over thickness safety device --Infeed bed rollers --Digital thickness controller --Individual amp meters --Disc brakes on sanding heads --Telemecanique electrics --Camozzi pneumatics --Variable speed drive system --Mono-block construction to increase durability. --Specification: --Max. width cap 52" --Feed motor 3 HP --Elevation motor 5 HP --Max. thickness 6" --Min. thickness 1/8" --Contact drum 1st and 2nd head 8" dia. --Roller drum on 2nd head 5" dia. --CFM requirements 6500 --Feed speeds 15-50 FPM --Belt size 52" X 75" --Weight 8100 lbs --AMPS (220 V / 460V ) 233/117.
Equipment Location:SOUTH
Joe Retzlaff
800-374-5009 ext:348
Mono-block construction to increase durability. -- Combination sanding head with rubber covered contact roll & graphite covered platen. -- Over thickness safety device. -- Digital thickness controller with LED readout accurate to a thousandths of an inch. -- "Automatic Thickness Setting" device for easy setup. -- OMRON Electronic belt tracking. -- GOODYEAR Endless conveyor belt with automatic belt tracking. -- REGAL Variable feed speed drive unit. -- Large cabinet style doors for easy access to all parts. -- Pnuematic belt tensioning. -- Double infeed & outfeed covered holddown rolls. -- Infeed conveyor extension with safety stop bar, emergency stop button and motor load meter. -- Operations manual & free box of 3M Sanding Belts. -- Optional 460 volt / 3 phase.
Equipment Location:SOUTH
Joe Retzlaff
800-374-5009 ext:348
EXTREMA XSP-1B-37 Knife Planer/Sander, (2) Heads --- 37" width capacity, Planer Head, Combination sanding head --Head Configuration --1st Head: Stealth Helical Planer Head 6" diameter, 25HP drive motor. --2nd Head: Combination sanding head with 4-3/4" rubber covered contact drum and 2-1/2" wide finishing platen, 20HP drive motor --Specifications -- 37" X 75" abrasive belt. -- The conveyor bed incorporates a 3 HP variable speed drive 15 to 50 FPM, and includes a 1/2 HP elevation motor. -- Maximum working width 36". -- Maximum material thickness 6". (2) 5" dia. dust outlets included for the planer head, and (2) 4" dia. dust outlets for the sanding head. -- Digital thickness programming via touch screen. -- Auto thickness device included. -- Auto conveyor belt tracking provided.
Equipment Location:SOUTH
Joe Retzlaff
800-374-5009 ext:348
EXTREMA XSP-1B-43 Knife Planer/Sander (2) Heads --42" Width cap. Stealth Helical Planer Head, Combination sanding head --Head Configuration -- 1st Head: Stealth Helical Planer Head, 6" dia., 30 HP drive motor. -- 2nd Head: Combination sanding head, 4-3/4" rubber covered contact drum ,and 2-1/2" wide finishing platen; 25 HP drive motor, --Specifications -- 37" x 75" abrasive belt. -- The conveyor bed incorporates a 3 HP variable speed drive, 15 to 50 FPM feed speed, -- elevation motor; 0.5 HP -- Automatic conveyor belt tracking. -- Material thickness of 6"; features Auto. thickness control. -- (2) 6" Dia. dust outlets for the Planer head, and (2) 5" dia. dust outlets for the Sanding head. -- Digital thickness programming via touch-screen.
Equipment Location:SOUTH
Joe Retzlaff
800-374-5009 ext:348
EZ SANDER EZ-3760 Wide Belt Sander with Combination HeadEZ-Sander's are built to with the ability to hold very tight tolerance (+/-.003) side to side when set up properly.Specifications: -- The sanding head is a combination head which consists of a 5" rubber covered contact drum for being aggressive followed by an adjustable 2-1/2" graphite covered felt polishing platen for doing very fine finishing sanding using a 37" X 60" abrasive belt. -- The conveyor belt speed is set to run at 10 - 30 FPM and is controlled via AC variable speed unit mounted in the main control panel. Simply adjust the dial setting your desired feed speed. -- Double infeed and outfeed holddown rolls are provided to help ensure proper part feeding through the Sander. -- The conveyor table/bed opening has a 0" to 5" opening allowing the operator to sand some parts as thick as 5" and have the ability to sand very thin parts as well. -- Power raising and lowering of the conveyor bed is standard. -- Digital thickness display is standard.Complete with & Features: -- EZ Sander is equipped with a state of the art electronic tracking system for the abrasive belt. -- Emergency stop heavy duty caliper disc brakes bring the sanding head to a stop within 4 to 5 Sec when activated by the machine's safety interlock system. -- Limit Switches on both sides of the abrasive belt to keep the belt from tover travel. NOTE: -- Available in single phase with a 7.5 HP or 10 HP motor. -- Voltage change to 440 Volt ...$275.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
The "EZ Sander" is built to process parts up to 43" wide with the ability to hold very tight tolerance (+/- 0.003) side-to-side when properly setup. -- The 20 HP sanding head is a combination head, which consists of a 5" rubber covered contact drum followed by an adjustable 2-1/2" graphite covered felt polishing platen for very fine finishing sanding with a 43" x 75" sanding belt. -- The conveyor belt speed is set to run from 10 - 30 FPM and is controlled at the main control panel by simply turning the dial to the desired speed within the 10 - 30 FPM range. -- The conveyor table/bed opening has a 0" - 5" opening allowing the operator to sand some parts as thick as 5" and have the ability to sand very thin parts, as well. -- The "EZ Sander" is equipped with: State-of-the-art electronic tracking system for the abrasive belt. -- Includes: Heavy Duty air caliper disc braking system for stopping sanding head within (4 - 5) seconds when activated by the machine's safety interlock system, safety micro-switches that are positioned on both inboard & outboard sides of the abrasive belt to keep the belt from tracking too far. -- 20 HP, 3 Ph, 60 Hz motor; voltage change to 440 Volt, please add ...$ 200.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
(2)Fastline Dog Ear Fast Cut II Dog Ear Pointer. Available Ready to Load
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
FELDER G-330 SINGLE PHASE SINGLE SIDED EDGEBANDER0.4 - 3 mm Edge thickness cap. and 40 mm panel thickness; 3" min. width and 4-3/4" min. panel length.Equipped with: -- Quick Melt Teflon coated glue pot for granular hot-melt adhesive. -- Heavy Duty guillotine for up to 3 mm thick PVC. -- Integrated Operator PLC controls and an LCD display. -- "Anti-slip" rubberized surface chain pads.Workstations: -- Double Blade End Trim with HF motor - 12,000 RPM. -- Top & Bottom Flush/Bevel Trim, bevels 0° - 15° (0.5 HP motor - 12,000 RPM each).Single feed speed of 26 FPM.Complete with: -- Sound & Safety enclosure over trim stations and outrigger panel support.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
15" Diameter log capacity Infeed width: 27" Infeed height: 17" Drum diameter: 51" (3) Knives 400 HP Motor 4-Top and 4-Bottom infeed rolls Approximate weight: 30,000 Lbs Approximate output: 40-60 Tons per hour Show with optional metal detector This machine was on display at IWF 2014. Please contact CMS to receive a custom quote.
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
FEZER Model 3SE 3,6 1P+2R, 5-Section Veneer Press Dryer complete with the following features: -- 141-3/4" Max. drying width x 33' long drying tunnel plus 80" long cooling section, single deck top & bottom screen type feed, top screen heavier for pressing effect on the veneer (304-stainless steel B-18-12-12-14), bottom screen 304-stainless steel (B-12-12-12-14). -- Heat is generated by (5) gas fired thermal oil boilers. The thermal oil heaters provide heat to 5-sections (800,000 BTU/Hr. each); thermal oil temperature 320° F. The heaters can be fired with natural or LP gas. -- 60 HP fans with temperature control. Cap. per hour on 1/24" Sycamore is 6,000 sq. ft./Hr from 80% - 7% moisture content. -- Overall size: 54' Long x 20' wide x 14' high. -- Dismantling, rigging and loading included at no charge. -- Please click on the "View Literature" button found below the photos on this listing for more detailed factory information. -- NOTE: Slicing equipment is also available at this site. See Listing VL-010203.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365
Includes Merry go round Includes reform grinder Synchronized speed between slicer & merry go round
Equipment Location:ON
Carolina Machinery Sales, Inc
704-288-1904
FEZER Model FM-30, Veneer Slicer System complete with the following features: -- 12" Max. lumber slicing width with an up to 10" high cant, veneer thickness 1/85" to 3/8" and with +/- accuracy of 0.002"; fixed knife with a 75ø fixed knife bias angle. -- Upper feed beam with continuous belt feed for 164 FPM or 246 FPM, 26 HP feed motor, 6 HP head elevator motor for "rapid" dual speed up & down travel; feed head can be raised to 16" opening for easy maintenance. -- Equipped with: Motorized upper feed beam which adjusts automatically during slicing at cant changes, fine hand wheel digital adjustment of front bed longitudinally or vertically, belt guide bearings for stable lumber feed, automatic indexing of pressure head, rollers in in- & outfeed table reduce friction; table height 36". -- Includes: Digital readout on table height; push & pull screws for nose bar adjustment and up to 6" opening between knife and nose bar for easy touch-up of knife. -- FEZER Merry-go-Round conveyor system (84" max. material length), allows continuous feed of several pieces of lumber to the slicer over powered rollers and driven cross-transfer chains, forward feed speed 250 FPM and sideways traversing feed at 130 FPM, handles (4 - 10) pieces of flitches/Min; at a slicer feed speed of 246 FPM, it can produce approx. (10) pieces of veneer/Min. -- Year 2001, REFORM Model 51 Knife Grinder with a 59" (1500 mm) knife length capacity. -- Please click on the "View Literature" button found below the photos on this listing for more detailed factory information. -- NOTE: A Veneer Dryer is also available at this site. See Listing VL-010202.
Equipment Location:EASTERN CDN
Bill Christoffersen
800-374-5009 ext:365