Woodworking Equipment For Sale

BIESSE LEVIA 320-1100 Wide Belt Sander, (2) Heads43" Width cap., Drum, Combination HeadHead Configuration:1st Head: Contact spiral grooved roll, 6" Dia., 30 HP motor.2nd Head: Combination head with a spiral grooved rubber-covered contact roll, 7-1/2" dia. 45 Shore covering, segmented platen computer controlled with air segments, 24 HP motor.Specifications: -- 43" X 74" Abrasive belts. -- Electronic abrasive belt tracking. -- All contact rolls with pneumatic seclusion, heads with air-jet abrasive belt cleaners. -- Output control of sectional platen. -- Conveyor belt feed, 11 - 66 FPM variable feed speed; Automatic conveyor belt tracking. -- 2 HP feed drive with inverter control. -- 1/8" - 7-7/8" Motorized thickness adjustment with LED readout.Equipped with & Features: -- Infeed and outfeed shoes or rubber-covered holddown rolls --Infeed panel "over-thickness" sensor. --Auto calibration, digital height read out -- Easy Quick grit selection. -- Electronic brakes on both sanding head motors. -- Infeed emergency stop. -- 3-Roll infeed extension and motor load metersNOTE: Some spec's may need to be verified

BIESSE EDGE - ROXYL 6.0 Edgebander, ...with (429) Hrs. Only!Specifications: -- Edgebanding thickness: 0.4 - 22 mm (0.02" - 0.87") Strip, 0.4 - 3 mm (0.02 - 0.12") Coil. -- Panel thickness 10 - 60 mm (0.39 - 2.36"), Min. panel width 85 mm (3.35"), min. panel length 140 mm (5.51"). -- Feed speeds: 10, 14, 18, & 20 MPM (33, 46, 59, & 65 FPM).Equipped with: -- "FI-502" Pre-milling Unit with: (2) Servo controlled spindles with Left-hand & Right-hand rotation & Auto-set device. -- "ADZ-700" Automatic anti-adhesive spray unit. -- 31" Dia. Coil table. -- Servo controlled infeed fence. -- Automatic edge Magazine for strips & coiled material. -- "VC-710" Hot melt glue system with: "QM-705" Pre-melt system for EVA. -- Servo controlled pressure section with: (1) Large driven roll & (4) idler rolls. -- PC-Based control with: 19" LCD Display, "ROXYL-MATIC" automated machine setup, MICROSOFT "WINDOWS" Operating System. -- 3-1/8"; W Feed chain with: 3 kW (4 HP) Motor. -- Programmable top pressure beam with: Driven flat belt & 0.22 kW (1/3 HP) Motor. -- 19-1/2"; Outboard support adjustment. -- Sound enclosure.Workstations: -- "IN-801" Front & rear end trim unit with 0° - 15° Bevel; pneumatic tilt & angle pre-selection from control. -- "RS-100" Top & Bottom rough/flush trim unit. -- "RF-400" Multifunction tilting Top & Bottom chamfering unit with: (2) HSD "ROTAX AT/MT 1073-120" 2.7 HP - 12,000 RPM Air-Cooled Electro-spindles, (4) Servo motors: (2) For horizontal position & (2) for up/down position; Combination bevel/radius/flush insert knives, Pneumatic prepositioning of motors. -- "CR-202" 2-Motor Corner rounding unit. -- "RBK-503" Top & Bottom profile scraping unit with: 2-Axis Servo controlled knife positioning, 2 - 3 mm radius, for PVC edges; "RCC-701" Top & Bottom flat glue scraping unit with Pneumatic controlled in/out position. -- "SP-501" Top & Bottom buffing unit with: (2) 0.37 kW (1/2 HP) - 3,430 RPM Motors. -- STEINEL "3426" 2,000 W Hot air blowers.Complete with: -- Transformer.Dimensions of this specific machine with outboard support extended: 296" x 64" x 72" H.NOTE: Buy the TAYLOR "38A-M3" Return Conveyor (EXF# FR-010320) and keep the set together!

BIESSE - JADE 240, ...Edgebander w/Premill & Corner Rounding -- Specifications: Edgebanding thickness: 0.4 - 8 mm (0.01" - 0.31"); Min. panel width 85 mm (3-1/2"); min. length 150 mm (5.9"); max. panel thickness 10 - 60 mm (0.39 - 2.36"). -- Premill Unit: (2) 1.8 kW (2.4 HP) - 12,000 RPM Motors; "AUTO-SET" device ensures optimum positioning of the cutters according to the thickness of the panel being machined; numerical readout; pneumatic exclusion when not needed. Workstations: -- End Trimming: Front & rear end trims: 0.8 kW (1.0 HP) - 12,000 RPM Motors; motors travel on 45° slides and pneumatic tilt 0° - 15° from the Control Panel. -- Flush/Bevel Trimming Unit: Top & bottom flush or bevel trims with: "Quick Change" Motors; 0.65 kW (0.8 HP) - 12,000 RPM motors; digital readouts for easy setup. -- Corner Rounding Unit: (2) Motors, 0.65 kW (0.8 HP) - 12,000 RPM for trimming leading & trailing upper & lower edge/corners with 2-position pneumatic set-up for corner rounding. -- Edge Scraping Unit: Finishing unit to eliminate previous machining imperfections; pneumatic exclusion from the machine control. -- Glue Scraping Unit:Top & Bottom scrapers for 3 mm thick PVC banding. -- Buffing Station: Top & Bottom.Operator & Machine Control: -- BIESSE "Smart Touch 7" + Windows Operating System: User-friendly touchscreen Control Panel for workstations; rotating Operator Control Panel w/keypad and LCD readout.Graphic 7" display touchscreen; high-resolution screen for defined and intuitive images and text; integrated 4 GB hard disk for filing media files and the programs back up.USB Port for managing in a simple and efficient way multimedia files, programs, and updates; Ethernet port for connecting the machine to the net.Complete with: -- Top pressure beam & motorized feed track with "anti-slip" "Quick Change" snap on 80 mm wide x 60 mm long rubber pads; low friction nylon graphite self-lubricating chain pads. -- Sound Enclosure & Panel Support: Overall trimming stations; industrial lights and viewing windows; extendable side panel support rail. -- Fixed feed speed at 39 FPM (12 MPM); 3 HP feed drive.Options include: -- Anti-Adhesive Unit:The unit applies an anti-adhesive liquid on the Top & Bottom surface of the panel. It is positioned before the Premilling Unit.The anti-adhesive liquid is applied with precision by means of injectors controlled by the machine control. -- Nesting Package:Allows trimming of pre-machined panels. -- Transformer:230 Volt auto-transformer. -- Actual Model is BIESSE JADE 240

BIESSE - Stream A 6.0. ... Edgebander (w/Premill & Corner Rounding), High Production w/NC Axis PackageFeatures: -- "NC Axis Package": The machine adapts to the process being executed based on the edge's thickness and material.Machine management ...100% touch with no need for external devices. - Intelligent language management.Easy program management and usability with rapid transition from one machining operation to the next. Specifications: -- Edgebanding Capacity: Edge thickness for strips: Min./max. 0.4 - 22 mm (0.02" - 0.87"); coiled material from 0.4 - 3 mm (0.02 - 0.12").Panel thickness from: 10 - 60 mm (0.39 - 2.36"); workpiece width: Min. of 85 mm (3.34"); workpiece length: min. 140 mm (5.51").Feed speeds of: 12 - 18 - 20 - 25 MPM (39 - 59 - 65 - 82 FPM).Machine Infeed Configuration: -- Premilling Station:(2) 1.8 kW (2.4 HP) - 12,000 RPM Motors; LH & RH Counter Rotating Spindles; NC (Servo) controlled with automatic intervention that guarantees a perfect base for gluing. -- Anti-Adhesive:Automatic Spray Unit with: Glue release agent preventing glue from adhering to workpiece's surfaces. -- Infrared Heating Lamp:Preheating workpiece edge to ensure best possible surface adhesion quality of edgebanding material. -- Edge Magazine: Automatic 2-coil/position magazine for processing coiled & strip edgebanding material in real-time. -- Pressure Section:Servo Controlled programmable pressure section with: (1) Large driven roller and (4) idle rollers.Gluing System w/Premelter: -- EVA (Hot Melt), quick premelting granulate with: Glue roller applicator to cover conventional edgebanding material. Workstations: -- End Trimming: Front & Rear Linear end trimmer with: Tilt Function for high speeds with (2) 0.8 kW (1.0 HP) - 12,000 RPM motors. The machine axis movement on linear tracks allows the achievement of very high processing speeds.The copying & tracing system guarantees optimal finish quality; also on high gloss edges with film. -- Flush/Bevel Trimming Unit:Top & Bottom flush or bevel trims with: (2) "Quick Change" 0.65 kW (0.8 HP) - 12,000 RPM motors. -- Fine Trimming Unit: (2) 0.65 kW (0.8 HP) - 12,000 RPM Motors; (2) Servo motors for tool positioning (one for horizontal tool position, one for up/down tool position).Prepositioning of motors by pneumatic air cylinders while using a combination bevel/radius/flush insert knives.Absolute machining flexibility thanks to the full adjustment of the machine according to the required edge thickness. -- Corner Rounding Unit: (2) 0.65 kW (0.8 HP) - 12,000 RPM Motors for front/back corner and upper & lower edge profiling.The controlled axis on the Corner Rounding unit supports the management of infinite machining settings. -- Profile Scraping Unit:Top/Bottom 2-axis NC programmable knife positioning (i.e. 2 - 3 mm radius) for PVC edges. -- Glue Scraping Unit: Flat, top/bottom, digital positioning indicators, pneumatically controlled for in/out position. -- Buffing Station: Top & Bottom buffin

BIESSE AKRON 440 AX EDGEBANDER (W/PRE-MILL & CORNER ROUNDING):Specifications: -- 012460 -- User-friendly graphic user interface with diagnostic and assisted maintenance. -- USB and Ethernet port. 1.44 MB floppy drive, automatic or manual startup.Complete with: -- High-frequency motors (200 HZ): Padded sound enclosure: -- Top pressure beam with staggered double-row hold-down wheels mounted on ball bearings.NOTE: Includes new Glue Pot, extra knives & misc. parts.

BIESSE SELCO SEKTOR 450 10-1/2' Front Load Automatic Panel Saw -- Specifications:Max. rip cut cap. 3,200 mm (125.98"), Max. pusher stroke 3,200 mm (125.98"), Max. saw blade projection 75 mm (2.92"), 7.5 kW (10 HP) Main & 2.2 kW (3 HP) Scoring motors, Main blade dia. 18", Scoring blade dia. 8". -- Saw Carriage:Feed speeds 1 - 120 MPM (1 - 394 FPM), Return speed 120 MPM (394 FPM). -- Pusher Fence: Forward positioning speed 60 MPM (197 FPM), Return speed 60 MPM (197 MPM), Helical rack & pinion movement on both sides to assure pusher remains parallel, Brushless servo motor, (6) Independent self-leveling grippers, with 65 mm (2.56") Opening size. -- Operator & Machine Control:"OSI (Open Selco Interface)" PC-Based Control, with 19" Display, USB & RS-232 Ports, & MICROSOFT "WINDOWS" Operating system, ZEBRA "STRIPE S4M" Bar Code Label Printer. -- Complete with:Automatic Saw Blade Height Adjustment, Quick-Change Blade System, 72"; L x 4"; H Fence, (3) 23-3/4"; x 79-1/2"; x 39-1/8"; H Air Floatation Tables with 2014 MZ ASPIRATORI VP450/500 2.2 kW (3 HP) High Pressure Positive Centrifugal Blower, & Transformer.

BINKS - COMET 3, ...Paint PumpMounted on a roll-around cart.

BLACK BROTHERS - 22-D-875-56, ...Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator and top only. -- Setup to 0" - 6" thick. -- Smooth EPDM applicator rolls and Chrome doctor rolls. -- Variable feed speed drive, pass line height 34". -- Drip Pan, Feed Pan, Continuous Flow Trough to be Stainless Steel or Teflon Coated. -- Trough for continuous flow 1" pneumatic pump and hose to supply product.Complete With: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout and cleanup pan.

BLACK BROTHERS 68" Top and Bottom Panel Cleaner,Specifications: -- Upper elevator 0 - 4-1/2" w/roll opening indicator, raised passline height. -- Equipped with: (2) 8-1/2" Tampico fiber brushes, brush speed 200 - 600 RPM; (2) 3-1/2" upper infeed & outfeed idler rollers, neoprene 60 durometer, (2) 3-1/2" lower infeed & outfeed power driven rolls, neoprene 60 durometer. -- Operating handwheels, motors, switches, etc on the left end. -- 1 HP REEVES feed drive, 20 - 100 FPM. -- Complete with: Infeed and outfeed anti-static strip brushes, sheet metal hood w/separate exhaust ducts for upper and lower cleaning brushes, (2) 6" exhaust outlets.

BLACK BROTHERS 1205 Air Pod Press Overall 146" x 62" platen dimension with (3) individual top platens, side loading on 146" side. -- Motorized vertical daylight up to 30" -- 3 individual platen zone controls for up to 5’ x 12’ press area, (3) 4’ x 5’ , pneumatic top pressure via (48) 5-1/2" stroke air pods producing a maximum 50 PSI specific pressure, and air assisted pop up rollers in bottom platen for loading-and-unloading, pass line height for loading is 29".

Black Brothers 22D glue spreader Max working width 50"Max working thickness 3" 1/2 Hp, 230/460 volt three phase drive motor Table passline height 40" 7-1/4" diameter x 50-1/2" long top and bottom chrome doctor rollers 9" diameter x 50-1/2" long top and bottom rubber covered applicator rollers (Please note that the top doctor roller and top applicator roller is segmented) 11-3/4" long and 38" long top roller segments

BLACK BROTHERS - 22-D-875-56, ...Glue Spreader or Roller Coater56" Nominal length; 8-3/4" dia. applicator; doctor & feed rolls, lower elevator. -- Setup to 0" - 4-1/2" thick. -- Neoprene applicator rolls - 16 TPI and Neoprene smooth doctor rolls. -- Single feed speed drive, passline height 30".Complete with: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout, and cleanup pan.Can convert to "Upper Elevator" for an additional price.Can Convert to "Variable Speed" for an additional price.(4 - 6) Week on complete rebuild.

BLACK-BROTHERS TOP & BOTTOM PANEL CLEANING BRUSH MACHINE

48" wide Black Bros UV Curing Oven

Specification from owner 2007 Black Brothers 775-56” Top and Bottom Glue Spreader with an extra-large 12.5” opening designed for SIP (structural insulated panels) manufacturing. This machine is brand new and ready for immediate delivery. 575V, 3PH

- Black Brothers Model 22D-875, 68”Top & Bottom Glue Spreader - Width Capacity: 68” - Grooved, Rubber-Covered Applicator Rolls - Applicator Roll Diameters: 8.75" - Main Motor: 1.5 HP, 208-230/460v, 3ph - Hard Rubber-Covered Doctor Rolls - Bottom roll adjustment 575 volt, 3ph

BLACK BROTHERS - 22-D-1175-56, ...Glue Spreader or Roller CoaterNominal length: 56"; 11-3/4" dia. applicator, doctor & feed rolls, lower elevator. -- Setup to 0" - 4-1/2" thick. -- Neoprene applicator rolls: 16 TPI and Neoprene smooth doctor rolls. -- Single feed speed drive, passline height 30".Complete with: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout, and cleanup pan.Can convert to Upper Elevator for an additional price.Can Convert to Variable Speed for an additional price.(4 - 6) Weeks on complete rebuild.

BLACK BROTHERS - 22-D-875-56, ...Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator & top only. -- Setup to 0" - 6" thick. -- Smooth Chrome applicator rolls and Chrome doctor rolls. -- Stationary feed speed drive, passline height 34". -- Drip Pan, Feed Pan, Continuous Flow Through. -- Trough for continuous flow 1" pneumatic pump and hose to supply product. -- (30) Day warranty for workmanship and manufacture's warranty for all parts used.Complete with: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout, and cleanup pan.

BOARKE 43 RK Wide Belt Sander, (2) Heads43" Width cap. Drum, Combination HeadHead Configuration1st Head: Contact Roll for Calibration 10"; Dia. Contact Roll, 85 Shore Hardness Dynamically balanced, 25 HP, 230/460 V, wired 230 V2nd Head: Combination Unit for Finish Sanding with ContactRoll, Pad or Both 5.5 “dia. Contact Roll 55 Shore Hardness, Dynamically balanced, 2.8"; wide Finishing Pad, 20 HP, 230 / 460 V, wired 230 V.Specifications: -- Sanding Units include: Photo electric belt tracking, Large diameter Tension, and Idle Rolls, Rigid Main beams for superior accuracy, 2.8"; Dia. spring loaded hold down rolls Quick release Tie Down Blocks, Y Delta Motor Starters -- Feed System: 4 ea. 5 ton capacity lifting screws, Heavy Duty 3-Ply conveyor belt, Heavy slider bed, machined for accuracy -- Variable conveyor speed from 7 – 45 FPM, Inverter Controlled Variable Speed, 2 HP drive motor, Conveyor belt centering device -- Infeed Roller, Guide Ways provide accurate vertical movement -- Control Panel (Located on Belt Loading Side for convenience) -- Digital Controller positions machine thickness -- Digital Readout in Inches or MM, And ν Buttons micro-adjust thickness in 0.001"; increments, Micro-Adjustment hand wheel for final thickness in 0.001"; increments -- Automatic Thickness Set Up, Motorized Thickness adjustment -- Amp Meter, and Volt MeterEquipped with & Features: -- Over Thickness Shut Off, Body activated safety switch at front of machine -- Door activated safety switches on ALL Doors, Emergency Stops front and rear -- UL / CE approved electrical components -- Disc Brakes on both motors -- Emergency Shut off activated when Air Pressure is too low, Overloads are tripped -- Emergency Stops are activated

37” Capacity single head 230 volt 3phase