• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
2 Results Found for Gang Rip Saw Viewing 1 - 2 of 2 results
RECENTLY ADDED
STANDARD LISTINGS
PROGRESSIVE - Model SB/D 31, ...Dip Chain Gang Rip Saw.Specifications and features: -- 31" Cap. arbor with: Pneumatic arbor lock, 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment; 22" min. length for glue joint accuracy, 6" throat depth to fence side of blade. -- (1) 31-1/2" Saw sleeve with: Double-keys arranged for 3-1/8" bore saw blades. -- Equipped with: 60 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake & load meter; 2-3/16" dia. turned, ground & polished saw arbor with outboard bearing; motorized vertical adjustment of arbor. -- Feed & chain: 34" Wide feed bed, 5 HP variable feed drive, feed speed from 30 - 150 FPM; adjustable jam protection. -- Dip bed carried on 2-1/2" pitch hardened double V-chain, extruded structural aluminum feed bed slats with replaceable "Safety Orange" polyurethane inserts; oil mist lubrication for extended chain life. -- Complete with: (2) Infeed & (2) outfeed 4" dia. air loaded overhead pressure rolls; full width air loaded laminated bed holddown plate at saw arbor with +/- 1/4" thickness variation with pressure adjustment, pressure rolls & bed plate unit with manual height adjustment. -- Anti-kickback Finger System with: (1) Lower & (2) upper on infeed, (1) upper between feed rolls, and (1) upper assembly on outfeed. -- Includes: 5" Dia. dust outlet on upper infeed & 8" dia. dust outlet in upper outfeed; control panel mounted on infeed; saw sleeve and spacers. -- Feed is from LEFT to RIGHT. -- NOTE: Machine is in the process of reconditioning; final work will be completed after Saw is sold with an estimated (3) weeks to complete.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
PROGRESSIVE MODEL SB/D 31 DIP CHAIN GANG RIPSAW (ONLY) - UNDER 100 HOURS OF RUNNING TIME - TOTAL -- With the following specifications and features: -- 31" Cap. arbor with pneumatic arbor lock, 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment; 22" min. length for glue joint accuracy, 6" throat depth to fence side of blade. -- (1) 31-1/2" Saw sleeve with double-keys arranged for 3-1/8" bore saw blades; extra sleeve included. -- Equipped with: 125 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake & load meter; 2-3/16" dia. turned, ground & polished saw arbor with outboard bearing; motorized vertical adjustment of arbor. -- Feed & chain: 34" Wide feed bed, 5 HP variable feed drive, feed speed of 30 - 150 FPM with adjustable jam protection. -- Dip bed carried on 2-1/2" pitch hardened double V-chain, extruded structural aluminum feed bed slats with replaceable "Safety Orange" polyurethane inserts; oil mist lubrication for extended chain life. -- Complete with: (2) Infeed & (2) outfeed 4" dia. air loaded overhead pressure rolls; full width air loaded laminated bed holddown plate at saw arbor with +/- 1/4" thickness variation with pressure adjustment, pressure rolls & bed plate unit with manual height adjustment. -- Anti-kickback finger system with: (1) Lower & (2) upper on infeed, (1) upper between feed rolls, and (1) upper assembly on outfeed. -- Includes: 5" Dia. dust outlet on upper infeed & 8" dia. dust outlet in upper outfeed; control panel mounted on infeed; (2) saw sleeves and spacers and misc. blades. -- Feed is from RIGHT to LEFT. -- Owner says there are under 100-hours on this machine! -- NOTE: Approximately $17,000 worth of extras including (2) spare arbors, (55) 10" dia. x 72-tooth carbide tipped blades, (4) hogging heads, (16) 1-7/8" and (23) 1-1/8" aluminum spacers, and (1) blade setup cart. Also included are (2) sets of blueprints and (3) installation and operator's manuals. -- NOT INCLUDED BUT AVAILABLE AT ADDITIONAL COST: CUSTOM INFEED AND OUTFEED to automatically feed and off-bear heavy MDF panels and consisting of: Infeed for up to 32" wide x 10' long bundles; vertical bar seen in the photos is dropped after loading bundles and prevents the load from spilling. Outfeed consists of a right angle transfer onto a pull chain. --
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349