• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
10 Results Found for Post and Pole Peeler Viewing 1 - 10 of 10 results
PREMIUM LISTINGS
Morbark Portable Post Peeler, 300 HP Deutz Engine, 60' Semi Trailer $25,000 obo 765-301-0274
Equipment Location:Fillmore, IN
Collier Timber Co.
765-301-0274
STANDARD LISTINGS
BRUSA LT-80 Single Belt Dowel Sander --Specifications --Minimum sanding dia, 10 mm. Maximum sanding dia. 80mm --Minimum sanding length 600 mm -- Sanding belt dimensions Sanding belts dimensions: 1850 mm x 120 mm -- Disk Motor 1.5 KW, Adjustable feed motor: 0.3 KW --Spec's may need to be verified
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
CASTALY CF-60 Dowel Milling Machine;Designed for cutting stick from square into round rod; ...the Wood Round Rod Milling Machine.Specifications: -- 1/4" to 2-3/8" Dia. (6 mm - 60 mm) capacity; 300 mm length cap.; 5 HP - 3,400 RPM cutterhead speed, 2 HP feed motor, (4) feed speeds of 10, 12, 14 and 16 FPM. -- Various cutters and feed rolls accommodate different dowel sizes in increments of 1/8". Equipped with: -- Guide tube & outfeed rollers. Machine comes with (1) set of 1/4" cutter heads and one set of 1/4" Knives - cutters available from 1/4" diameter. -- Additional cutter heads and knives of your choice available at ...$399 per each size cutter head and ...$129 per set of knives (knives are universal, can be used on any cutter head).Features & Application: -- Designed for cutting stick from square into round rod, cutting stick up to 60 mm in diameter. -- Excellent for making round rod using material like wood, rattan, acrylic and similar materials; (4) cutting feed speeds to suit the various materials. -- Integrated operator safety features such as feed rolls guard, fully enclosed transmission parts; with 6" dust outlet. --SPECIAL NOTE: This machine was used to run one test, it is in as new condition!Weight: 1,150 Lbs; Crate dims.: 48" L x 40" W x 50" H.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
CHING FENG CF-60S Dowel Milling --Designed for cutting stick from square into round rod, cutting stick up to 60 mm in dia.; better than a single-head machine. -- Excellent for making round rod from materials like wood, rattan, acrylic, and similar material. --Specifications: -- Dual cutterheads, rough and fine for smoother surface finish in (1) pass. -- 1/4" to 2-3/8" Dia. (6 mm - 60 mm) cap.; 400 mm (15-3/4") length to unlimited. -- 5 HP (3-Phase) or optional 7.5 HP motor, 6,000 RPM cutterhead speed; 2 HP feed motor, (4) feed speeds of 14 - 16 - 18 & 20 FPM. -- Various cutters & feed rolls accommodate different dowel sizes in increments of 1/8" and the (4) cutting feed speeds suit various materials. -- Equipped with: Guide tube & outfeed ,cutters available from 1/4" diameter. -- Optimal operator safety by such features as feed rolls guard, fully enclosed transmission parts; incl. 4" dust outlet.
Equipment Location:WEST COAST, AL
EX-FACTORY INC.
704-841-2001
FELL LDF Dowel Milling Machine; Through Feed Dowel Milling Machine.Specifications & Features: -- Milling capacity of 1/2" to 2-1/4" dowels. -- Adjustable cutting head with 7/8", 1", 1-1/2",1-5/8", 1-3/4" and 2" sleeves. -- Heavy duty cast iron machine. -- 20 HP motor. -- Approx. weight 950 Lbs.
Equipment Location:NORTHEAST
Joe Retzlaff
800-374-5009 ext:348
HAWKER 1000 Dowel Milling Machine --Specifications: --1/4" - 1-7/8" Dia. cap., 18" min. stock length, 10 HP - 3,600 RPM cutterhead motor. -- Equipped with & Features --(1) Set of powered V-infeed rollers with independently adjustable tension & (1) set of powered outfeed rollers with round rolls. -- 2 HP feed drive for variable feed speed of 10 - 150 FPM, feed works is gear driven. -- Push button magnetic switch with automatic cutout for overload & under voltage protection. -- Comes with: a Brown-Brockmeyer Co. Knife grinder 120 volt, also may knives some never used
Equipment Location:MID ATLANTIC, AL
EX-FACTORY INC.
704-841-2001
Morbark C-16L Pole Peeler
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Morbark PSP Post Peeler System, 53'Infeed, 25.5' Outfeed with Kickers at 9.5' & 22.5', 45' Waste Conveyor with Bower & S Pipe, 18.5' x 14.5' Infeed Roof top 5 Strand Deck or 36' 2 Strand Roller chain Deck 5.5' Wide. Does 2.5" to 10" Dia.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
NORTHTECH FS-75 Dowel Milling Machine:Designed for cutting stick from square into round rod.Specifications: -- 1/4" to 2-3/8" Dia. (6 mm - 60 mm) capacity; 300 mm min. length cap.; 7.5 HP - 3,400 RPM cutterhead speed, 2 HP feed motor, (4) feed speeds of 10, 12, 14 and 16 FPM. -- Equipped with: -- Guide tube & outfeed rollers. Machine comes with tooling to run 7/16" dia. to 2-5/16" dia. --Features & Application: -- Designed for cutting stick from square into round rod, cutting stick up to 60 mm in diameter. Excellent for making round rod using material like wood, rattan, acrylic and similar materials; (4) cutting feed speeds to suit the various materials. -- Integrated operator safety features such as feed rolls guard, fully enclosed transmission parts; with 6" dust outlet.
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
SIBO TAUS 2-1/2" Dowel Milling Machine --Description: The TAUS 2 1/2 is an automatic moulding and sharpening machine engineered by Sibo. --It is applicable for use in the production of sticks with integrated cylindrical section and diameters, such as billiard cues, broom, shovel, hoe, rake handles, chair legs, and more. --Equipped with & Features --Numerical control, and 3 axes. It enables changing of profile and dimensions of the piece if needed. --The unit can produce a minimal quantity of items without changing templates and cams. --It is utilized within a diameter range of 18 mm to 63 mm, and a 470-mm minimum length of the piece
Equipment Location:WESTERN CDN, AL
EX-FACTORY INC.
704-841-2001