Woodworking Equipment For Sale

WESTERN PNEUMATICS FJE 430R Medium Production Finger Jointer SystemRight and left Shaper Section with Automatic crossover model FJE 430 RCSpecifications: -- Material Thickness Capacity: 5/8"; – 2"; -- Material Width Capacity: 1-5/16"; to 8"; -- Material Length: 4"; – 28"; -- Feed Capacity 30 - 60 Lugs Per Minute -- Lugs are Space on 12"; Centers -- Feed Motor: 10 HP -- Variable Speed Feed from 30 - 60 FPM -- Scoring Saw Motors: 3 HP -- Trim Saw Motors: 5 HP -- Cutterhead Motors: 15 HP -- Manual Transfer Corner -- APQUIP Glue Applicator -- Assembly Press w/ 16’ Max. Cut-off Capacity, Model AMS 248 LB -- Assembly Section Feed Variable Up to 150 FPM -- Self-Contained Hydraulic Unit -- 7.5 HP Cut-off Saw -- Board Press, Model BPS 216 RC -- Standalone Control Cabinet -- Touchscreen PLC Control

WHIRLWIND - 855, Dual Table Oscillating Edge SanderDouble-sided with 8" x 56" platens size.Specifications: -- 7.5 HP - 1,725 RPM TEFC Motor, abrasive belt size of 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table, tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection, dust hood on drive end, and all standard equipment.

Model: 1000L From left to right feed Blade Capacity: 14 Cutting Capacity: 2-3/16 x 8-1/4 OAD: 25"L x 25"W x 45"H Also Included Tiger stop

Whirlwind Undercut Saw with Tiger Stop Fence

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

Wintersteiger DSG Sonic Frame Saw

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Woods 502M hardwood flooring machine

WOODS Planer-Matcher - Model 412 motorized, heavy duty planer-matcher with 6 heads. Ideal machine for surfacing dimension lumber or specialty products such as siding and flooring. 6" x 14" capacity, 8 knife heads; 50 hp top, 25 hp bottom, 20 hp sides; 20 hp bottom profile, 15 hp top profile. Item 32203.

Woodtek 2 Spindle Boring Machine

Dry glue joints in seconds.

5 HP - 1,200 RPM motor, roller table size 32" x 84", horizontal travel stroke 38", adjustable height of table base from 26" to 35" via large hand wheel. -- Rubber-faced Aluminum Pullies 8-1/2" face x 16" dia., accepts 6" wide abrasive sanding belts, pulleys can be spaced to accommodate various belt & material sizes, belt loop travels over table with manual handwheel belt tension & tracking. -- Includes: Magnetic starter, dust hoods

WYSONG & MILES Edge Sander6" x 32" Graphite mocovered wooden platen, Double 8" x 34" tilting side tables, full 180ø steel end table, tilts and raises & lowers. --2 HP motor, direct drive motor.

WYSONG & MILES 604 DOUBLE SIDED OSCILLATING EDGE SANDERDouble Sided Oscilating Edge Sander with 7.5 HP - 1,800 RPM TEFC motor; (2) 11" x 60" cast iron platens; 10" x 172" abrasive belt size, (150) oscillations/Min with 1/2" movement, 0.5 HP oscillation motor.Equipped with: -- (2) 11-1/2" x 62" Cast iron side tables and (1) cast iron end table; tables tilt 30° up & 45° down; 5" vertical table travel w/hand wheel adjustment, 5" lateral side table travel w/hand wheel adjustment, 4-1/2" lateral end table travel w/handwheel adjustment. -- 10" Dia. x 10-1/2" face direct drive pulley, 4-1/2" dia. x 10-1/2" idle pulley. Complete with: -- Magnetic controls with overload protection & dust hood with 4" dia. outlet.