BioMass Equipment For Sale

VECOPLAN RG 40-40 SINGLE SHAFT SHREDDERSpecifications; -- 40 HP Motor -- Opening 40" x 48" -- 10" Rotor -- (27) New Cutters -- (3) Screens -- New Allen Bradley Panel, Panel Counter Knife, New Guide Rails, New Ram Wipers.Price is Loaded on your truck

VECOPLAN RG52/150 SPK SINGLE SHAFT SHREDDERSpecifications: --In Feed Opening: 52″ x 58″ --Rotor Length: 52″ --Rotor Diameter: 15″ --Hopper Volume: (4) Cubic Yards --Cutters: 60 --Nip Cutters: 29 --Drive Motor: 150 HP --Rotor Speed: 125 RPM --Hydraulic Ram: 3-5 HP

VECOPLAN - RG 52, ...Single Shaft ShredderCOMPLETELY Rebuilt!VECOPLAN "RG 52" Low Noise Waste Grinder with: Vertical hopper feed; suitable for wood, paper, and plastic applications; 52" x 58" opening. -- 60 HP Rotor motor, power belt drive; 15" dia. high output "Torsion Point" cutting rotor with a (74) 4-way indexable, replaceable cutterknives. -- Rotor/cutter head grinds at approx. 120 - 140 RPM; average noise level 60 - 70 dbA. -- Includes: Heavy Duty construction stress-relieved shell and frame; tramp metal protection; oversized gear box and Heavy Duty roller bearings. -- Precision hydraulic "Process Ram" with: 5 HP, 2-Speed pump motor; fluid "TurboCoupling; monitored by programmable logic control feeding system. -- Separate electrical Control Panel with push button controls. -- Machine weight: 10,000 - 12,000 Lbs.

MLS Number 11342021 2008 Vecoplan RG32/20U Grinder/Shredder Single shaft grinder / shredder 80 DBA noise level 32 in. by 42 inch opening waste grinder with vertical 2 cubic yard hopper 20 HP rotor motor Equipped with10 inch rotor with 20 indexable/replaceable cutter knives Rotor / cutter head grinds at 95 R.P.M. Hydraulic pusher ram with 1.5 HP two speed pump motor Separate electrical panel with push button controls 80 DBA noise level 8 inch exhaust 8 inch hump magnet screen to produce ½ in.in size Handles 1,000 to 1,200 lbs./ hour depending on product mix and loading. Machine still operating. Will be available sometime in May/June 2022

2015 Vermeer FT3001358 hours Can run carbide to chipper teeth

2018 Vermeer HG2800 Cat C27 950HP Has Cat Engine Warranty to 6,000 Hours or Approx. 10-31-22 Approx 2600 Hours

Vermeer HG6000 3/4" Square Baffel Screen Only had half a truck load ran through it

2006 Vermeer HG6000 Horizontal Wood Grinder CAT C16, 630 Hp engine Approx 6300 hours PT Tech clutch; Magnet; Remote 1 1/4", 3" & 6" screens Regular maintenance Work ready

Vermeer HG365 Grinder New infeed roll and remote control Ready to go to work!

2013 Vermeer HG6000 -6000 hours -CAT C-18 engine -New material output belt that comes with it -Tires and lights good

2006 Vermeer TG7000 2100 hours Work ready

2004 Vermeer HG 6000 TX with 5,200 hours on a 630 HP Caterpillar Engine. Has a 2 year old duplex drum series 3 upgrade, Complete Kit including mill bearings etc. remote. Overall Length 54.5 in Transport Length 549.6 ft Transport Width 117.6 ft Operating Weight 75,000.0 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

Verville VP300 Includes controls and hydraulic pack

Verville 4 Stage Bagging System. #C921 Located in WI.

VERVILLE VP424-S-CCW BAGGING SYSTEM4-Station Compression Bagging SystemSpecifications & Includes: -- High Tubes of 116" -- Bag Size 11" x17" up to 30" High -- Automatic Plastic Bag Sealer -- Oil Tank Heater and ModemLoaded on your Truck

Verville VP400 Bagger Includes: Bag Placer & Automatic Bag Sealer 92" Tubes (2) Systems available 575v/3PH NO infeed auger or conveyor included. Systems will be available by the end of April 2024.

Verville VP300 Bagger

VERVILLE 376 3-STAGE Bagging System with Conveyor and Stretch WrapperSpecifications: -- Bag size: 17.5"; X 12.5"; X 40" -- Number of stages: 3Equipped with: -- Surge tank -- Stretch Wrapper -- 25' conveyor

VERVILLE VP400SE 4-STATION BAGGERComplete 4-Station Bagging System -- Automatic Bag Placer -- Automatic Bag Sealer -- Bag Size 12" x 17" x up to 30" High -- Hydraulic System and Control -- Tube Height 130''Loading on Buyer's TruckNOTE: This machine requires 27' clearance inside a building.