You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
989 Results Found for Woodworking Viewing 1 - 20 of 989 results
RECENTLY ADDED
PREMIUM LISTINGS
DeWalt/Black & Decker 3553 7.5 hp 3-phase radial arm saw. Purchased after overhaul from factory in Britt, IA. Has plastic all-weather cutting deck. Have particle board cutting deck. Comes with accessory rollers for long pieces of wood. Stored inside and ready to go.
Equipment Location:Anselmo, NB
308-289-5466
STANDARD LISTINGS
CEHISA BRYKO, Single Sided Edgebander0.4 - 2 mm Edge thickness cap. and 40 mm panel thickness; 3" min. width and 4-3/4" min. panel length.Equipped with: -- Quick Melt Teflon coated glue pot for granular hot-melt adhesive. -- Heavy Duty guillotine for up to 2 mm thick PVC.Features: -- Integrated Operator PLC controls for (10) programs, "short-cut" function keys and an LCD display.Workstations: -- Double Blade End Trim with HF motor - 12,000 RPM. -- Top & Bottom Flush/Bevel Trim, bevels 0° - 15° (0.5 HP motor - 12,000 RPM each). -- Single feed speed of 20 FPM. -- "Anti-slip" rubberized surface chain pads.Complete with: -- Sound & Safety enclosure over trim stations and outrigger panel support. -- Set of tooling and operator's and spare parts manual.
Equipment Location:MIDWEST
Ed Webb
800-374-5009 ext:377
CEHISA EP-9 Single Sided Edgebander0.4 - 6 mm Banding capacity, automatic strip feed & coil feed magazine, compact Hot Melt glue system, heats up in (12) Min.Specifications: 3 mm PVC Guillotine, 3-roll pressure section w/pneumatic positioning; min. panel length 5" (120 mm), min. panel width 3" (75 mm), max/min panel thickness .375" - 2" (8 - 45 mm).Workstations: -- Single-motor end trim with (2) blades. -- Top & Bottom flush & bevel trim unit with 0° to 20° tilt (0.75 HP ea. motor). -- Top & bottom PVC scraper for up to 3 mm radius. -- Last Station: Top & bottom buffing unit (0.75 HP motors).Features: Electronic braking on trim motors; digital readout on top/bottom trim; feed speed of 35 FPM and 2 HP feed drive.Complete with: SIEMENS "Simatic" touch screen control; Sound enclosure; outboard panel support; frequency converter; used tooling.
Equipment Location:SOUTHEAST
Ed Webb
800-374-5009 ext:377
CEHISA "EP-9" SINGLE SIDED EDGEBANDER0.4 - 6 mm Banding capacity, automatic strip feed & coil feed magazine, compact Hot Melt glue system, heats up in (12) Min.Equipped with: -- 3 mm PVC Guillotine, 3-roll pressure section w/pneumatic positioning; min. panel size: 4-3/4" Length x 3" width x 8 - 45 mm thickness.Work Stations: Single-motor end trim with (2) blades -- Top & Bottom flush & bevel trim unit with 0° to 20° tilt (0.75 HP ea. motor). -- Top & bottom PVC scraper for up to 3 mm radius. -- Top & bottom buffing unit (0.75 HP motors). -- Electronic braking on trim motors; digital readout on top/bottom trim; feed speed of 35 FPM and 2 HP feed drive. -- Sound enclosure, outboard panel support, frequency converter, and used tooling.
Equipment Location:NORTHEAST
Ed Webb
800-374-5009 ext:377
CEHISA "PRO 8" SINGLE SIDED EDGEBANDER0.4 - 3 mm Edge thickness cap., Teflon coated glue pot system, automatic magazine for strip & coil feed; Heavy Duty guillotine for up to 3 mm thick PVC. Specifications: (2) roll pressure zone with (1) motorized and (1) idle roller. -- Workstations: Single motor saw blade end trim (0.45 HP - 12,000 RPM motor); Top & bottom flush/bevel trim, bevels 0° - 20° (0.45 HP motor ea.) -- (2) Motor Top & Bottom Buffing station. -- Complete with: High Frequency converter, 1 HP main drive motor, digital readouts for trimmer adjustments, sound hood & tooling.
Equipment Location:SOUTHWEST
Ed Webb
800-374-5009 ext:377
CEHISA 404 SINGLE SIDED EDGEBANDER0.4 - 20 mm (3/4") Edge thickness cap. and also 5 mm PVC banding,Edgebanding height 2.36" (60 mm) max: 5" min. panel length and 3" min. width.Equipped with: Quick Melt compact glue system, automatic strip & coil magazine, guillotine for up to 4 mm thick PVC; 4-roll pneumatically controlled pressure section, each roller individually controlled.Workstations: -- Double motor end-trim (0.75 HP HF motors), tilt 0° - 10°;. -- Top & bottom flush trim (2 HP - HF motors). -- Top & bottom radius scrapers for 3 mm PVC. Top & bottom buffing (0.75 HP motors ea.). -- Variable feed speed from 30 - 72 FPM, 2.5 HP feed drive.Complete with: Sound insulated enclosure w/windows, outboard panel support, and used tooling.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
CEHISA BRYKO PLUS, ..."Compact" Edgebander. 0.4 - 2 mm Edge thickness cap. and 40 mm panel thickness; 3" min. width and 4-3/4" min. panel length. -- Equipped with: Quick Melt Teflon coated glue pot for granular hot-melt adhesive; Heavy Duty guillotine for up to 2 mm thick PVC. -- Features integrated Operator PLC controls for (10) programs, "short-cut" function keys and a LCD display.Workstations: -- Double Blade End Trim with HF motor - 12,000 RPM; Top & bottom flush/bevel trim, bevels 0° - 15° (0.5 HP motor - 12,000 RPM ea.); -- Top & Bottom PVC Scraper for up to 5 mm radius. -- Single feed speed of 20 FPM and "anti-slip" rubberized surface chain pads. -- Complete with: Sound & Safety enclosure over trim stations and outrigger panel support. -- Includes set of tooling and operator's and spare parts manual.
Equipment Location:MID ATLANTIC
Ed Webb
800-374-5009 ext:377
CEMCO MVB 84 Vertical Boring Machine -- 84" x 20" table with 84" X 15" boring area, 71" between columnEquipped with: -- (6) 1. HP spindles, each spindle with on/off switch control, 1 1/2" min. center-to-center distance on vertical spindle; -- 2 HP hydraulic feed pump w/variable speed control and 18 gallons reservoir. -- Moving table with 8" stroke and up to 30 stroke per minute. -- Manual and automatic mode of operation , foot pedal cycle activationAlso included: -- Protective guard in wire meshNote: Picture of the machine are before it will be cleaned and checked
Equipment Location:SOUTHEAST
Louis Sicotte
800-374-5009 ext:329
CEMCO MVB 84 Vertical Boring Machine -- 84" x 20" table with 84" X 15" boring area, 71" between columnEquipped with: -- (5) 2. HP spindles, each spindle with on/off switch control, 1 1/2" min. center-to-center distance on vertical spindle; -- 2 HP hydraulic feed pump w/variable speed control and 18 gallons reservoir. -- Moving table with 8" stroke and up to 30 stroke per minute. -- Manual and automatic mode of operation , foot pedal cycle activationAlso included: -- Protective guard in wire mesh
Equipment Location:MIDWEST
Louis Sicotte
800-374-5009 ext:329
CEMCO URF-2243 Wide Belt Sander (2) Heads43" Capacity Drum, Combination Head. Head Configuration: -- 1st Head: Rubber covered contact roll, 10" dia., 25 HP motor. -- 2nd Head: Combination head with roll and finishing platen, 20 HP motor. Specifications: -- Belt size for 1st and 2nd head: 76" x 43". -- Electronic abrasive belt tracking & pneumatic belt tensioning. -- 2 HP Variable feed speed conveyor motor from 15 - 60 FPM, 0" - 6" motorized thickness cap., infeed & outfeed rubber covered pinch rollers on both heads. Equipped with & Features -- Motor load meters and infeed conveyor extension. -- Air disc brakes on sanding heads. -- Infeed emergency operator stop bar, and (4) dust outlets all 8" diameter.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
CEMCO MVB 84 Vertical Boring Machine -- 84" x 24" table with 84" X 24" boring area, 71" between columnEquipped with: -- (6) 1.5 HP spindles, each spindle with on/off switch control, 1 1/2" min. center-to-center distance on vertical spindle; -- 2 HP hydraulic feed pump w/variable speed control and 18 gallons reservoir. -- (2) Spring loaded Hold Down -- Moving table with 6" stroke and up to 30 stroke per minute. -- Manual and automatic mode of operation , foot pedal cycle activationAlso included: -- Protective guard in wire mesh
Equipment Location:SOUTHEAST
Louis Sicotte
800-374-5009 ext:329

Cemco U002252 Sander

Call for Price
Cemco Orbital Sander Model U002252, S/N 05109, 675Hours
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CEMCO 4352 Wide Belt Sander (3) Heads; -- 52" Width cap. Drum, Drum, Finishing Platen, 3-Head.Head Configuration: -- 1st Head: Steel contact roll, 50 HP motor. -- 2nd Head: Rubber contact drum, 40 HP motor. -- 3rd Head: Finishing Platen, 40 HP motor.Specifications: -- 52" x 103" Abrasive belt. -- Electric eye tracking & air tensioning. -- Variable speed conveyor feed. -- Motorized thickness adjustment from 0" - 6", combination of infeed & outfeed spring shoes & pinch rollers.Equipped with & Features: -- Auto emergency stop, motor load meters, bad belt compensating device, dust tight electrical enclosures, and recent replacement of conveyor belt.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
CEMCO MBV 54 Vertical Boring Machine -- 54" x 15" Cast iron table with 54" x 24" wooden top,Equipped With: -- (6) universal spindles with movable spindle supports, -- (6) 1 1/2 HP - 1,725 RPM direct drive spindle motors, -- 1-1/2" min. center-to-center distance; -- (1) spring loaded holddowns, -- 36" stationary table height; -- 6" max. vertical stroke, spindles advance hydraulically at 0 - 30 strokes/Min; -- Foot pedal actuated w/single cycle & continuous automatic modes; -- 2 HP hydraulic feed pump, 12-gal. hydraulic pump system;
Equipment Location:SOUTHEAST
Louis Sicotte
800-374-5009 ext:329
CEMCO MBV 54 Vertical Boring Machine -- 54" x 15" Cast iron table with 54" x 24" wooden top,Equipped With: -- (3) universal spindles with movable spindle supports, -- (3) 1 1/2 HP - 1,725 RPM direct drive spindle motors, -- 1-1/2" min. center-to-center distance; -- (1) spring loaded holddowns, -- 36" stationary table height; -- 6" max. vertical stroke, spindles advance hydraulically at 0 - 30 strokes/Min; -- Foot pedal actuated w/single cycle & continuous automatic modes; -- 2 HP hydraulic feed pump, 12-gal. hydraulic pump system; Also included: -- Custom built tubular back fence with left side fence stop -- Currently wired with (8) on/off switches & electrical disconnect
Equipment Location:SOUTHEAST
Louis Sicotte
800-374-5009 ext:329
CEMCO MVB 84 Vertical Seat Boring Machine -- 96" x 20" table with 84" X 15" boring area, 71" between columnEquipped with: -- (16) 1.5 HP spindles, each spindle with on/off switch control, 1 1/2" min. center-to-center distance on vertical spindles; -- 4"max. spindle stroke; Spindles advance hydraulically at (0 - 30) strokes/Min, -- 2 HP hydraulic feed pump w/variable speed control and 18 gallons reservoir. -- 36" Stationary table height. -- Manual and automatic mode of operation , foot pedal cycle activationAlso included: -- Several boring Template for chair seat -- Protective guard in wire mesh
Equipment Location:SOUTHEAST
Louis Sicotte
800-374-5009 ext:329
CEMCO 4374 Wide Belt Sander, 3-Head with 6' width capacity;3-Head, 72-inch width capacity, with the following head sequence. -- 1st Head: 15" Dia. rubber covered contact roll, 75 HP motor. -- 2nd Head: 15" Dia. rubber covered contact roll, 75 HP motor. -- 3rd Head: 5" wide finishing platen, 60 HP motor. -- Contact rolls & finishing platen with dial indicator height adjustment, 74" x 126" abrasive belts with solid-state electronic tracking.Feed System: -- Variable feed speed from 20 to 60 FPM, Heavy Duty feed works, 5 HP conveyor drive 20 to 60 FPM. -- Infeed shoes & holddown rolls on heads. -- Motorized thickness adjustment with automatic part thickness set-up. -- Conveyor cleaning brush with dust hood, split abrasive belt shutoff system.Complete with: -- 18" Infeed conveyor extension. -- Magnetic motor controls, load meters and emergency stop.Used for only (1,219) Hours.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
CENTAURO TA-F-EC Automatic Copy Lathe with (2) Copiers and Hopper Feed.Electronic control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & pitches.General Specifications: -- 78.7" (2,000 mm) Max. between centers, 10 HP (15 kW) main motor, variable 0 - 4,500 RPM spindle speed; -- 1.5 HP (1.1 kW) Hydraulic power pack for programmable variable speed carriage with an advance rate of 0 - 98 FPM, carriage return speed of 98 FPM. -- Automatic work cycle turning, milling & fluting/spiral twisting for clockwise/counterclockwise and cross-milling with the required depth of pitches and programmable depth of cut. -- Up to (10) pass-depths; can program the complete turning cycle with (1 or 2) passes.Turning Specifications: -- 9-7/8" (250 mm) Max. copying/ milling with round billets and 6.9" (176 mm) with square billets. -- 5-1/2" (140 mm) Max. copying/milling with large steady rest & round billets and 4" (100 mm) with use of square billets. -- 3-1/2" (90 mm) Max. copying/ milling with small steady rest & round billets and 2-1/2" (65 mm) with small steady& square billets.Equipped with: -- Hopper feed, (2) Highly sensitive copying units which can machine simultaneously, with a max. stroke of 6" (150 mm) and (2) revolving steady rests (large or small). -- Hydraulic tailstock with controllable pressure, automatic workpiece centering system inter-linked to tailstock. -- Tailstock sleeve is 60 mm (2-3/8") with 100 mm (4") travel and 3/4" morse taper on tailstock center; hydraulic controlled spindle brake.Milling (Router) Unit consisting of: -- Electric spindle motor, 2.2 kW (3 HP) at 24,000 RPM controlled by "EM22" Electronic Control Unit which can be programed to run at 6,000/12,000/18,000 and 24,000 RPM according to cuttersize. -- The electric spindle has automatic feed and can be programmed up to (10) pass depths. -- Electronic control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & pitches; milling unit may be removed when not required.Complete with optional: Programmable 2nd automatic pass with a max. depth of 30 mm (1-3/16").
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
78" (2000 mm) Max. between centers, 9.8" round or 7" square (250 mm round or 178 mm square) max. part dia. with revolving steady rest, 6.5 HP main motor, 0 - 4,500 RPM spindle speeds; 0.5 HP hydraulic motor. -- Automatic controlled variable speed carriage with tool post and revolving steady rest, 0 - 32 FPM max. working speed, carriage return speed 33 FPM. -- Special cutting system with: (1) Roughing & (1) finish gouge for simultaneous roughing & finishing, (1) dowel cutting turret knife. Approx (10) follower rings for travelling steady rest. -- Separate control console with: "TRIA 4000" PLC, 720 KB memory, and 3-1/2" floppy disk. Programs for each profile are stored on a disk so there is not need for a template/copy unit. Can control speeds, pauses, up to 10 passes for machining. -- Comes with a Labtop computer with WINDOWS '98 and uses "CT CAD" to generate programs for the profiles. -- Includes: Revolving steady rest, bushes, ball bearing centers; quantities & sizes to be provided. Knife sharpener and a selection of tooling. -- Equipped with: Pneumatic hopper feed and unloading device of finished pieces.
Equipment Location:Midwest
Tony Cornacchione
800-374-5009 ext:432

Challoner 71528 Tennoner

Call for Price
Challoner 527 TS Dbl End Tennor w/Controls Serial Number: 403150 Doerr Electric Corp Motor Model: 71528 128/6.4 Amps 3 Phase 220/440 Volts 5 hp 3500 rpm Comes With Transformer and Control Panel Type: 12_4 480 3 Phase Overall Measures 146" Wide X 149" Long X 80" Tall
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351