• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
43 Results Found for Lathes and Carvers Viewing 1 - 20 of 43 results
STANDARD LISTINGS
BACCI T4MO 4-Spindle Copy Lathe/Shaper w/Sanding. Capacity: (4) Spindle duplicating/carving/copy heads with (4) copy belt sanders for asymmetrical parts. Max. working height: 6.5" (165 mm), max length capacity 39.4" (1000 mm). -- Speeds: (3) carriage speeds: 3 IPM (75 mm/min)_up to 7.87 IPM (200 mm/min). Spindle speeds: 25 minimum to 42 maximum RPM. -- Features: Carriage feed motor 1 HP. Cutter drive motor 7.5 HP. Bell cutters 1.38" (35 mm), Minimum working radius 0.71" (18 mm). -- NOTE: Larger diameters are possible by using every second carriage position, ie. (2) heads instead of four heads. -- Actual model is T4MOL.
Equipment Location:SOUTH
Tony Cornacchione
800-374-5009 ext:432
BACCI T4MO 4-Spindle Copy Lathe/Shaper w/Sanding. Capacity: (4) Spindle duplicating/carving/copy heads with (4) copy belt sanders for asymmetrical parts. Max. working height: 6.5" (165 mm), max length capacity 39.4" (1000 mm). -- Speeds: (3) carriage speeds: 3 IPM (75 mm/min)_up to 7.87 IPM (200 mm/min). Spindle speeds: 25 minimum to 42 maximum RPM. -- Features: Carriage feed motor 1 HP. Cutter drive motor 7.5 HP. Bell cutters 1.38" (35 mm), Minimum working radius 0.71" (18 mm). -- NOTE: Larger diameters are possible by using every second carriage position, ie. (2) heads instead of four heads.
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
BACCI T4MO 4-Spindle Copy Lathe/Shaper w/Sanding. Capacity: (4) Spindle duplicating/carving/copy heads with (4) copy belt sanders for asymmetrical parts. Max. working height: 6.5" (165 mm), max length capacity 39.4" (1000 mm). -- Speeds: (3) carriage speeds: 3 IPM (75 mm/min)_up to 7.87 IPM (200 mm/min). Spindle speeds: 25 minimum to 42 maximum RPM. -- Features: Carriage feed motor 1 HP. Cutter drive motor 7.5 HP. Bell cutters 1.38" (35 mm), Minimum working radius 0.71" (18 mm). Comes with: New/Barely used set of BACCI cup cutters, approx. $1,000 value. -- NOTE: Larger diameters are possible by using every second carriage position, ie. (2) heads instead of four heads.
Equipment Location:NORTHEAST
Tony Cornacchione
800-374-5009 ext:432
BOULLY MACHINES V-Steel Lathe Knife Sharpener with matching Grinding Wheel. -- The open V-steel quality material knives with two-inside edges is the ideal lathe tool and recognized as the most efficient (15% - 40% productivity gain) . Sharpener tangential cut & constant cutting angle grinds both inside edges of knives with one set-up. -- Sharpener with direct drive motor. Installed grinding wheel included. -- Types of Grinding Wheels available at extra cost from BOULLY: 'MX' (Quality HSS-constant profile) for softwood. 'TM' (Carbide Tipped-constant profile) for hardwood. 'CW' (Quality Alloy) is recommended for MDF.
Equipment Location:SOUTHWEST, AL
EX-FACTORY INC.
704-841-2001
CALPE L6-1600 Spindle Sander with Hopper Feed. -- (6) Spindles, semi-automatic sanding machine; distance between centers 63", 6-3/16" max sanding diameter, capable of sanding 1800 spindles per hour. -- 4 HP - 1,800 RPM head motor, (5) sandpaper holders, each for different grits, 4000-3200-2200-850 RPM head spindle speeds. Copier unit that follows all contours. -- Oscillating sanding units & stationary pick up of part. -- NOTE: This sander was running with lathe on our record number LC-01811 and owner prefers to sell at the same time.
Equipment Location:NORTHEAST
Tony Cornacchione
800-374-5009 ext:432
CALPE TH5-1600 Heavy-Duty High-Production, Fully Automatic CNC Lathe: General Description: Multi-Spindle cutting simultaneously, (5) spindles using V-type gouge knives; 63" (1,600 mm) max. distance between centers; 5-1/2" (140 mm) max. swing diameter between spindles. -- CNC Controlled with 3.35" (85 mm) travel for depth of cut. -- Motors/Speeds: (2) Head stock motors, each 12.5 HP - 1,750 RPM; CNC controlled electronic variable speed of main head from 100 - 6,000 RPM. 2 HP approx hydraulic drive. -- Fast return travel of up to 590 IPM (15,000 mm/min); CNC controlled feed speed carriage, variable up to 50 FPM (15 MPM). -- Loading device & tail stock powered by hydraulic pump with 2 HP - 1,750 RPM motor; No. 5 Morse taper on main spindle shaft. -- Features: Automatic loading & unloading device; carriage mounted with linear guides providing high precision movement. -- Full CNC controller with on-screen CAD programming for all products.Matching CALPE L6-1600, record number LC-010996 spindle sander is available at additional cost at same facility.
Equipment Location:NORTHEAST
Tony Cornacchione
800-374-5009 ext:432
78" (2000 mm) Max. between centers, 9.8" round or 7" square (250 mm round or 178 mm square) max. part dia. with revolving steady rest, 6.5 HP main motor, 0 - 4,500 RPM spindle speeds; 0.5 HP hydraulic motor. -- Automatic controlled variable speed carriage with tool post and revolving steady rest, 0 - 32 FPM max. working speed, carriage return speed 33 FPM. -- Special cutting system with: (1) Roughing & (1) finish gouge for simultaneous roughing & finishing, (1) dowel cutting turret knife. Approx (10) follower rings for travelling steady rest. -- Separate control console with: "TRIA 4000" PLC, 720 KB memory, and 3-1/2" floppy disk. Programs for each profile are stored on a disk so there is not need for a template/copy unit. Can control speeds, pauses, up to 10 passes for machining. -- Comes with a Labtop computer with WINDOWS '98 and uses "CT CAD" to generate programs for the profiles. -- Includes: Revolving steady rest, bushes, ball bearing centers; quantities & sizes to be provided. Knife sharpener and a selection of tooling. -- Equipped with: Pneumatic hopper feed and unloading device of finished pieces.
Equipment Location:Midwest
Tony Cornacchione
800-374-5009 ext:432
CENTAURO TA-F-EC Automatic Copy Lathe with (2) Copiers and Hopper Feed.Electronic control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & pitches.General Specifications: -- 78.7" (2,000 mm) Max. between centers, 10 HP (15 kW) main motor, variable 0 - 4,500 RPM spindle speed; -- 1.5 HP (1.1 kW) Hydraulic power pack for programmable variable speed carriage with an advance rate of 0 - 98 FPM, carriage return speed of 98 FPM. -- Automatic work cycle turning, milling & fluting/spiral twisting for clockwise/counterclockwise and cross-milling with the required depth of pitches and programmable depth of cut. -- Up to (10) pass-depths; can program the complete turning cycle with (1 or 2) passes.Turning Specifications: -- 9-7/8" (250 mm) Max. copying/ milling with round billets and 6.9" (176 mm) with square billets. -- 5-1/2" (140 mm) Max. copying/milling with large steady rest & round billets and 4" (100 mm) with use of square billets. -- 3-1/2" (90 mm) Max. copying/ milling with small steady rest & round billets and 2-1/2" (65 mm) with small steady& square billets.Equipped with: -- Hopper feed, (2) Highly sensitive copying units which can machine simultaneously, with a max. stroke of 6" (150 mm) and (2) revolving steady rests (large or small). -- Hydraulic tailstock with controllable pressure, automatic workpiece centering system inter-linked to tailstock. -- Tailstock sleeve is 60 mm (2-3/8") with 100 mm (4") travel and 3/4" morse taper on tailstock center; hydraulic controlled spindle brake.Milling (Router) Unit consisting of: -- Electric spindle motor, 2.2 kW (3 HP) at 24,000 RPM controlled by "EM22" Electronic Control Unit which can be programed to run at 6,000/12,000/18,000 and 24,000 RPM according to cuttersize. -- The electric spindle has automatic feed and can be programmed up to (10) pass depths. -- Electronic control of the machine makes it possible to program the complete turning cycle with (1 or 2) passes for fluting & spiral twist in both clockwise/anti-clockwise and cross-milling using the required indexing & pitches; milling unit may be removed when not required.Complete with optional: Programmable 2nd automatic pass with a max. depth of 30 mm (1-3/16").
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
Coyer Automatic Hydraulic Copy Lathe Model CP 1300 SA with hopper feed. -- Equipped with: One finishing back knife slides two heavy precision Teflon columns for a balanced effortless smooth knife traverse. Tool carriage with two V-roughing knives with respective high-low speeds controlled by proximity switches. -- Sequence and Hydraulic Controls: Carriage high-low speed, knife pressure and tailstock holding hydraulic pressures are centralized at one location. Machine controller defines the sequence of each function as it happens and provides trouble shooting assistance. -- Length capacity from 100 to 1,120 mm (3.9" - 44"). -- Diameter capacity: 20 mm to 130 mm ( 3/4" to 5-1/16""). -- Main drive motor 7.5 HP. 3 HP hydraulic pump -- Variable turning speed 1800- 3600 RPM
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
Max diameter: 3" 8-speed drive spur Fully automatic Newer control system using PLC (2) gouges run off steel template (4) hydraulic back knives Auxillary stabiliser set up on one of the plunge knife rams for smaller whippier pieces This Automatic Tracer Lathe is ready to load....call now!!!
Equipment Location:Monroe, ME
Carolina Machinery Sales, Inc
704-288-1904
GOODSPEED - COYER CP-168 A Back Knife Lathe -- Manufactured machine authorized by GOODSPEED.° 26.7" Length cap., and 1/2" - 3.9" max. dia. capacity.Equiped with: -- 10 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change. -- 3 HP hydraulic feed motor, 2-speed carriage. -- Swiveling control panel, PLC sequence controller built into separate control cabinet. -- (3) pressure gauges, automatic way & support collar lubrication. Features: -- One Backknife on columns with linear motion guides giving smooth knife traverse. -- One Hydraulic copy knife, fixed pre-rounding tool, and travelling steady rest. Additional air cylinder/solenoid operated steady rest attachment for slender parts. -- Production capacity: (5 - 7) pieces/Min for 600 mm length, (3 - 5) pcs./Min for 900 mm length, (2 - 3) pcs./Min for 1,200 mm length depending on wood species and desired finish.Also included: Voltage transformer for 575 volts operation
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, return speed of carriage. -- Complete with the following options: 4-Jaw chuck follower rest 30 - 60 mm (1-3/16" - 2-3/8"), 4-jaw chuck follower rest (2-3/8" - 3-15/16"), live center "MK-2", pressure ring, precision setting of depth, left & right run with slip-off safety device, hand rest for subsequent cutting by hand on support, faceplate for bowl turning.
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP-5000-NC-3100 Hydraulic Copy Lathe with NC(PLC) Control and Spiral/Twist attachment. -- Capacity: 3100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. -- Copier: Hydraulic Copier with 6" (150 mm) tracing stroke. Spindle/carriage drive: 5.5 HP (4 KW) spindle drive motor, electronic variable spindle rotation speeds from 300 - 3,200 RPM, carriage speed infinitely variable feed by DC drive 0 - 15.5 FPM. -- Features: Spiral/Twist/Flute Milling attachment with 0 - 24,000 RPM infinitely variable speed control; PLC unit controls indexing and leads for twist and flute work . Also PLC/Microprocessor stores data for each job and automatically recalls the settings, ie. feeds/speeds, settings, etc. -- Control Panel: Operator conveniently mounted on carriage. Main control panel w/PLC etc. mounted at rear of machine. Electric VDE w/under-voltage protection and lockable switch, "IP 54" type of protection. . -- Template follower: System accepts sample turnings or flate plate profiles. -- Spindle Shaft: Double, precision, sealed ball bearings, "M-33" thread, "MK-3" inside cone. -- Tailstock: Heavy Duty design w/ex-center quick action "MK-2" quill cone. -- Complete with: 4-Jaw chuck follower rest 30 - 60 mm, variable (1-1/4" to 2-3/8"); special "MK-2" live center with pressure ring, "MK-3" 6-pronged dog, 30 mm dia. lengthened; ring follower rest 15 mm - 70 mm with precutter, (1) set insert for ring follower rest dia. 20 mm - 70 mm -- Includes Transformer: 14 KVA , 400/220 V to connect lathe on 220/3/60 electrical supply, if needed . -- Note: Steady rests included are pictured in blue. -- Machine dimensions: Length 4,330 mm (171"); Width 1,200 mm (48"); Height 1,600 mm (64"). Weight 1,100 kg (2500 Lbs).
Equipment Location:SOUTHWEST
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP-5000 HYDRO KING Hydraulic Copy Lathe with Rope/Twist Feature. Turns balusters, newel posts, columns up to 96" in length with a max. dia. of 9-3/4" (without steady rest). -- Capacity: 98" (2500 mm) Max. between centers, approx. 96" (2400 mm) copy length. 3-1/2" Max. part dia. with revolving steady rest, 5-7/8" max. with copying unit, 9-5/8" max. for manual turning. -- Spindle/Feed motors: 2.5 HP spindle motor, (6) speeds 600 - 900 - 1,200 - 1,500 - 1,800 & 3,000 RPM. Carriage feed drive motor is 0.5 HP DC motor with infinitely variable speed. -- Copier: Turning accomplished with a single Tantung gouge on hydraulic copying unit on tool post with highly-sensitive tracer requiring only 2.3 ounce (65 grams) pressure. Pre-rounding tool. 5.9" (150 mm) stroke, working on both wooden samples and profile templates. -- Features: Spiral/Twist feature on KING model uses a far more powerful & quiet induction motor (not router motor). Will do a rope/twist on the full 96" of length. Length capacity extended slightly by owner. -- Includes: Revolving travelling steady rest. Capable of (2) working passes on the profile. Dust hood. -- Controls: Push button electric controls conveniently mounted on carriage; integrated chip/dust hood, electric spindle brake, and spindle reversing gear to change from copying to manual working.
Equipment Location:SOUTHWEST
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP 5000/Hydro Hydraulic Copy Lathe with two copier knives.General data: 63" (1600 mm) Max. between centers, approx. 59" copy length, 2.5 HP main motor, (6) speeds 600 - 900 - 1,200 - 1,500 - 1,800 & 3,000 RPM; 0.5 HP motor feed drive for carriage with tool post & revolving traveling steady rest with pre-rounding tool.. -- Copy System; Turning accomplished with a two (rough & fine) Tantung gouge powered hydraulic copying unit with highly-sensitive tracer requiring only 2.3 ounce pressure, 5.9" (150 mm) stroke, working on both wooden samples and profile templates. -- Traveling Steady Rests/Copying range: (3) traveling steady rests, (4) Jaws Follower, infinitely variable with approx. size range (1.2" - 3.9'); 30 - 60 mm, 50 - 80 mm, and 60 - 100 mm, 3-1/2" Max. part dia. with revolving steady rest, 5-7/8" max. with copying unit, 9-5/8" max. for manual turning. Capable of (2) working passes on the profile. -- Includes: Push button electric controls, integrated chip/dust hood, electric spindle brake, and spindle reversing gear to change from copying to manual working.
Equipment Location:SOUTHEAST
Tony Cornacchione
800-374-5009 ext:432
3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. of 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. -- 6" (150 mm) Hydraulic tracing stroke. 5.5 HP (4 kW) drive motor, electronic variable spindle rotation speeds from 300 - 3,200 RPM, carriage speed infinitely variable feed by DC drive 0 - 15.5 FPM. -- Spindle Shaft: Double, precision, sealed ball bearings; "M-33" thread, "MK-3" inside cone. -- Tailstock: Heavy Duty design w/ex-center quick action "MK-2" quill cone. -- Electric: VDE w/Under-voltage protection and lockable switch; "IP 54" type of protection. -- PLC/Microprocessor, stores data for each job & automatically recalls the settings (i.e., feeds/speeds, settings, etc.). -- Template follower system accepts sample turnings or flat plate profiles; hydraulically operated copier. -- Complete with: 30 - 60 mm 4-Jaw chuck follower rest, variable (1-1/4" to 2-3/8"); special "MK-2" live center with pressure ring, "MK-3" 6-pronged dog, 30 mm dia. lengthened. -- Ring follower rest from 15 mm - 70 mm with precutter; (1) set insert for ring follower rest dia. 20 mm - 70 mm. -- Complete with: Knife sharpener, milling head for spiral, twist, etc., and all accessories as pictured.
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
47" Length capacity, 9 7/8" max. .approx. turning dia., approx. 2-3/4" turning dia. with steady rest (with suitable insert ring/bearing); (2) copier knife heads - one rough and one finishing knives; fixed knife can be attached to travelling steady rest for pre-rounding. --5.5/7.5 HP approx. main motor, 2800 RPM V-belt motor drive, (2) heavy duty (hydraulic) rear knife tool holders, self-contained oil hydraulic feeding system, 2 HP hydraulic feed motor. -- Blanks are manually placed onto the centering V's and pressing the clamping (hydraulic) lever and remaining operation is controlled by the hydraulic system.
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
74.8" (1900mm) max. between centers and 8-5/16" (210mm) height of center over bed, max. copying dia. of 3.5" (90mm) with standard steady rest. 5.5 Hp spindle motor & 3 Hp hydraulic motor. Automatic work cycle sequencing with electronic control. -- Electronic drive from 1000 - 500 RPM spindle speeds; Hydraulic variable speed carriage. --Equipped with: One Hydraulic tracing units; 3.5" max. square part size. --Includes: (2) backnife holders and support (which can also be used as semi-steady rest with optional suitable attachment). -- (2) hydraulic copying knife. -- Pre-rounding tool support with fine adjustment, pre-cutting tool with insert knife, drive center with interchangeable jaws, revolving tailstock center with 12 mm dia. tip, dust extraction hood and automatic double pass system for finishing center. -- Sliding safey doors at front of machine.
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
INTOREX CI-1500 NC Controled Turning Lathe --Manually fed, automatic work cycle Hydraulic Copy Lathe with electronic PLC control.FEATURES: -- Automatic centering arms, hydraulic tailstock operation. -- 1,500 mm (59") Max. between centers; --Max. turning dia. 11.81" (300 mm) or 8.27" (210 mm) for square billets. -- 7.5 HP Main motor controlled by PLC with a frequency converter. -- 0 - 130 FPM variable speed carriage, 2.0 HP hydraulic pump feed drive. -- Fitted with PLC control; automatic programming allows creation, modification and memory storing for each work cycle and profile. -- Copying system with (2) hydraulic copier knives and travelling steady rest. -- Includes: (1) steady rest, (2) back knife tool holders on top for plunging or dowelling ends, copy knives, and (1) each headstock & tailstock. -- Supplied with: Intorex AFG-100 Tool Grinder.
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
LA SCOLPITRICE 12 Spindle Carving Machine. -- (12) Cutter Stations, (12) dual carving heads, -- Each head has a roughing & finishing spindle, all heads swivel 360ø with pneumatic locking. --NOTE: Missing (1) carving head. -- Machine is currently under power (not in use - business is closed).
Equipment Location:SOUTHWEST
Tony Cornacchione
800-374-5009 ext:432