• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
3 Results Found for Router Viewing 1 - 3 of 3 results
RECENTLY ADDED
STANDARD LISTINGS
LAGUNA SMART SHOP 4 X 8 Single spindle:48" x 96" Y- and X-axis travel and 6" Z-axis travel; 900 IPM rapid travel with 600 IPM maximum cutting speed by stepper motor ; 7-1/4" clearance under gantry. -- Heavy-duty Welded tubular steel frame (2,600 Lbs approx. machine weight); 6-zone vacuum table with T-stots. -- 20 mm Heavy-duty HiWin Series linear bearings and rails on all axes. “Helical” rack-and-pinion drives on “X” and “Y” axes, and precision-ground ball screw drive on “Z” axis. Gantry is driven on each end (two “helical” rack-and-pinion drives on Y-axis). -- Spindle: 4 HP liquid cooled constant torque, high frequency liquid-cooled spindle built with NSK bearings rated for 100% duty cycle (6,000 - 24,000 RPM). -- LAGUNA controller with spindle speed control through programming. -- Features: Solid state limit switches, Centralized lubrication system for all axes. -- Complete with:(7.5 HP) Vacuum Pump, assorted collets and manuals are Included.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
LAGUNA SMART SHOP II CNC Router, 4' X 8' with ATC only (2) months old:48" x 96" Moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slots including manual controls.Specifications: -- 48" x 96" x 9.5" Axis travel with 12" clearance under the gantry, Speeds of 900 IPM, rapid travel with 600 IPM maximum cutting speed. -- (1) 11 HP "HSD" air cooled spindle with (ATC), 9,000 - 24,000 RPM Range, Ceramic Spindle Bearings. -- Supported by Automatic Tool Changer with (8) tool position tool rack Includes assorted tool holders, collets, and precision collet nuts. All axes: -- Ride 25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. -- Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis). Control & Operator Interface: -- The B & R Automation (Austria) System-matched controller and drive components for easy diagnosis and exceptional reliability. -- Machine features the networking, connectivity and online troubleshooting typically found in Windows environments without the Windows baggage. -- Runs industry standard G-Code that can be created from any CAM software package. -- Program transfer to the controller can be accomplished with USB, or via Ethernet transfer. Complete with: -- Expandable control system for custom applications. -- Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run. -- Centralized lubrication system for all axis, (1) 8 HP vacuum pump and assorted tool holders.
Equipment Location:WEST COAST
Norm Schust
800-374-5009 ext:445
LAGUNA SWIFT SERIES 5 X 10 CNC Router, Single spindle:60" x 120" Y- and X-axis travel and 6" Z-axis travel; 900 IPM rapid travel with 400 IPM maximum cutting speed by stepper motor; 7-1/4" clearance under gantry (upgraded to 12" tall). -- Heavy-duty Welded tubular steel frame (2,600 Lbs approx. machine weight); 6-zone vacuum table with T-stots. -- 20 mm Heavy-duty HiWin Series linear bearings and rails on all axes. “Helical” rack-and-pinion drives on “X” and “Y” axes, and precision-ground ball screw drive on “Z” axis. Gantry is driven on each end (two “helical” rack-and-pinion drives on Y-axis). -- Spindle: 3 HP high frequency liquid-cooled spindle built with NSK bearings rated for 100% duty cycle (6,000 - 24,000 RPM). -- LAGUNA Handheld controller with spindle speed control through programming. -- Features: Solid state limit switches, Centralized lubrication system for all axes. -- Complete with following upgrades: (2) Vacuum Pumps, assorted "ER 20" collets, Tooling and manuals and Laguna Flux3 Dust Collector. -- Machine Foot Print: 90″W X 144″L 58"H
Equipment Location:PACIFIC NORTHWEST
Norm Schust
800-374-5009 ext:445