• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Router Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
KOMO 508 MACH I CNC Router with ATC and Boring, 5' X 8':60" x 96" Moving table design in a front-to-back configuration with a single zone vacuum table machined out of solid cast aluminum, (3) pop-up pins for material location; extra Heavy Duty fixe d gantry bridge. -- Equipped with: (1) 16 HP "BT-30" Type ATC Colombo spindle, 8-position traveling tool carousel, variable speed from 6,000 - 18,000 RPM. -- Boring Unit:20 spindle with 14 Vertical boring with 6 horizontally opposed boring spindle Y axis, 2 horizontally opposed boring spindle X axis. -- Feed rates and travelFANUC Closed loop, brushless AC Servo drive system with precision ground pre-loaded ball screws for positioning tolerances of 0.001, and 1,250 IPM max. positioning feed rates on the X- & Y-axis, 600 IPM on Z-axis with travel of X Axis travel 97", Y Axis travel 84" and Z Axis travel 6". -- Extended gantry bridge: For full 5' x 8' table coverage, all axes ride on extra large precision contour linear guideways, all way & ball screw bearings serviced by an automatic lubrication system. -- Control: GE/FANUC "210i M" Series computer control with: WINDOWS PC Front end, high resolution CRT, (3) axes simultaneous control, RS-232 port, hand held controller, background editing, self-diagnostic, canned cycles, absolute & incremental programming, cutter comp., tool length comp., and feed rate & spindle speed override. -- Complete with: Assorted tool holders, service records and original manuals & documentation.
Equipment Location:SOUTHEAST
Norm Schust
800-374-5009 ext:445
KOMO 508 MACH I with ATC and boring under power for inspection:60" x 96" Moving table design in a front-to-back configuration with a single zone vacuum table machined out of solid cast aluminum, (3) pop-up pins for material location; extra Heavy Duty fixed gantry bridge. -- Equipped with: (1) 12 HP "BT-30" Type ATC Colombo spindle, 8-position traveling tool carousel, variable speed from 6,000 - 18,000 RPM. -- Boring Unit:6 Vertical boring in "Y" Axis, 2 horizontally opposed boring spindle Y axis, 2 horizontally opposed boring spindle X axis. -- Feed rates and travelFANUC Closed loop, brushless AC Servo drive system with precision ground pre-loaded ball screws for positioning tolerances of 0.001, and 1,250 IPM max. positioning feed rates on the X- & Y-axis, 600 IPM on Z-axis with travel of X Axis travel 97", Y Axis travel 84" and Z Axis travel 6". -- Extended gantry bridge: For full 5' x 8' table coverage, all axes ride on extra large precision contour linear guideways, all way & ball screw bearings serviced by an automatic lubrication system. -- Control: GE/FANUC "210i M" Series computer control with: WINDOWS PC Front end, high resolution CRT, (3) axes simultaneous control, RS-232 port, hand held controller, background editing, self-diagnostic, canned cycles, absolute & incremental programming, cutter comp., tool length comp., and feed rate & spindle speed override. -- Complete with: QUINCY "QSVB 25" 25 HP vacuum pump, assorted tool holders, service records and original manuals & documentation. -- Hours:Only 3,205 hours run time with the vacuum pump showing 6,055 hours!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
KOMO VR 512 CNC Router with (2) Spindles and with ATC & Boring with 9,491Hours:Moving table, Heavy Duty fixed bridge machine in a front-to-back configuration with a 2" thick solid cast aluminum table. -- Equipped with:(2) 16 HP ATC ISO 30 taped spindles, each spindle has a front mount 8-position tool changer, variable speed from 6,000 - 18,000 RPM. Manually adjustable Router Spindle spacing from 26.625" to 31.5"; (1) 11-spindle drilling unit with (7) vertical and (4) horizontal drills. -- All axes:Ride on THK linear guide ways with motion provided by closed-loop AC Servo motors driving precision preloaded ball screws, delivering positioning tolerances of 0.001" and 1,200 IPM rapid traverse rates.All ball screw and way bearings are serviced by an automatic lubrication system. -- GE/FANUC "OMC" Series computer control with: 9" High resolution CRT, (3) axes simultaneous control, linear & circular interpolation, RS-232 port, hand held controller. -- Features:Background editing, self-diagnostic, canned cycles, absolute & incremental programming, cutter & tool length compensation, and feed rate & spindle speed override. -- Complete with:25 HP KAESER Vacuum Pump, assorted tool-holders and documentation. -- This router has an extended Y-axis and the bridge width is 160" and the machine is under power in production for inspection. NOTE: The MFG tag states VR 612; KOMO modified the machine back to a "VR 512" when sold in 2001!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
KOMO VR 512 TG SOLUTION CNC Router with Tool Changer, Boring and Rake; only 5,100 hours.5' x 12' Moving gantry machine in front-to-back configuration, Phenolic vacuum table machined with a single zone vacuum table, (4) pop-up pins for material location. -- Equipped with:(1) 13.4 HP "HSK-63F" Type ATC Electro-spindle, variable spindle speed up to 24,000 RPM. 12-Station tool carousel and a 19-spindle drilling unit.X-Axis (gantry) motion is accomplished via dual precision helical racks mounted on each side of the base frame using FANUC "Alpha HVI" Servo motors.Y-Axis (gantry) motion is accomplished via a precision rack; precision pinion with planetary gear reducer is driven by a digital FANUC "Alpha HVI" Servo motor.Z-Axis motion is accomplished via pre-loaded precision ball screw and powered by a FANUC "Alpha HVI" Servo motor; automatic lubrication system to service all ball screws, racks & way bearings. -- Operator & Machine Control:GE/FANUC "Panel I" Control with Touch screen display: Windows/XP PC Front-End, 15" high resolution color CRT, (4) axes simultaneous control, linear & circular interpolation, network compatible, and hand held MPG control. -- Features:Background editing, self-diagnostics, high speed, high precision machining function, canned cycles, absolute & incremental programming, inch/metric capability, cutter & tool length compensation, and feed rate & spindle speed override. -- Complete with:(1) QUINCY 25 HP Vacuum System, spare spindle, material rake, off load table, assorted tool holders, manuals, and documentation.Machine routes sheet, then sweeps (rakes) parts onto a 5' x 10' offload table and returns to park for loading by operator.This machine does have a tool touch off probe. Pedestal for operating on opposite side of machine included and also an additional PC front end for plug and play backup. NOTE: Safety shroud is custom made for our current application and will NOT be sold with the machine.
Equipment Location:WEST COAST
Norm Schust
800-374-5009 ext:445