• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Moulder Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
IIDA MC 251/5 Moulder Feed Through -- 5-Head (B-R-L-T-B), 9-5/8" x 4-3/4" working capacity. -- Head sequence: Bottom 15 HP, right & left heads 20 HP total, top 15 HP, bottom 10 HP motor. -- Spindles: 1-13/16" dia. at 6,000 RPM with high precision bearings. Digital readouts on spindle adjustments; spindle adjustments on front of machine, motorized feed beam adjustment. -- Feed: Variable feed speed 5 - 25 MPM, (16 - 80 FPM), 7 HP feed drive with individual motors for each pendulum unit., overhead powered feed wheels with pneumatic pressure, hardened infeed bed plates, powered bed roller at outfeed. -- Tables: 2M (6'6") infeed straightening table with adjustable fence. Manual table lubrication pump. -- Complete with: Full safety hood/sound enclosure, manual Waxilit bed pump and central lubrication system for all spindles and adjustment screws. Includes: Dust manifold and complete (1) complete set of cutterheads. -- Note: Seller has a Diehl SLR that can be included with this machine.
Equipment Location:SOUTH
Bob Dykstra
800-374-5009 ext:378

IIDA MH-221 Moulder

Call for Price
Capacity 9" x 4-3/4" 1st Head - 7.5 HP Groover 2nd Head - 7.5 HP Jointer 3rd Head - 15 HP Right 4th Head - 15 HP Left 5th Head - 15 HP Right tilting head 6th Head - 25 HP Top 7th Head - 25 HP Top 8th Head - 15 HP Bottom Outboard bearing on heads 7 and 8 Feed Speed 20 to 200 ft/min 1-13/16" spindles Carden Drive (3) Powered Infeed Rolls Random Length Hopper Feeder Iida grinder included
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
IIDA MM-224 Millenium 9 Heads Troughfeed Moulder -- 9-Head, (B-R-L-R-L-T-T-B-U), 9-7/8" x 5-3/4" capacity. Head sequence: -- Bottom 7.5 HP, right 7.5 HP, left 7.5 right 7.5 HP, right 7.5 HP, top 10 HP, top 10 HP, bottom 75 HP, and universal 15 HP motors. -- Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- All spindle adjustments of spindles with mechanical digital readouts for setting accuracy. Chipbreakers include mechanical digital readouts. -- All spindle adjustments from the front side of machine, motorized feed beam with (2) support guide ways with independent adjustment of top spindles. -- Universal spindle with 360ΓΈ rotation from backside of machine fence. Mechanical adjustment. -- 10 HP Feed motor, 26 - 110 FPM feed speed, inverter drive adjustment by digital control. -- Overhead powered feed wheels with pneumatic pressure, hardened infeed bed plates and powered table rollers. -- 700 m (28") infeed straightening table, side pressure roller at infeed table includes short stock feed roller for short pieces down to 18". Chromed tables and fences. Complete with: -- Full safety hood/sound enclosure, automatic Waxilit bed pump, central lubrication and chromed table plates and fences. -- Pedestal with machine controls seperate from machine for easy setup!
Equipment Location:EASTERN CDN
Bob Dykstra
800-374-5009 ext:378
IIDA WOODSMAN M-301CX, 12”, HIGH-SPEED 5-HEAD MOULDER WITH JOINTED (740 hours), (460/60/3 electrics), General Specifications:11-7/8" x 6" maximum work-piece capacity, (1” x 1” minimum)20 HP, 230/460/60/3 bottom horizontal spindle, (4-15/16" to 6-1/2” cutting circle)15 HP, 230/460/60/3 right vertical spindle, (4-15/16" to 8-5/8" cutting circle)15 HP, 230/460/60/3 left vertical spindle, (4-15/16" to 8-5/8" cutting circle)30 HP, 230/460/60/3 top horizontal spindle, (6-1/4" to 10" cutting circle)20 HP, 230/460/60/3 bottom horizontal spindle, (6-1/4" to 10" cutting circle)(2) 7.5 HP, 230/460/60/3 variable cardan-drive feed system motors 20 to 150 ft./min. variable feed speed via inverter control .5 HP motorized feed-beam positioning with limit switches Adjustable height wedge infeed bed 2 1/8” diameter, 6,000 RPM spindles Outboard bearings for all horizontal spindles CX single-axis spindle positioning for #3 axial & #4 radial movements (20) setting values for the CX control Electronic digital readouts or #3 left radial & #4 top axial Manual digital readouts on all other spindle axis Straight-knife jointer for #4 top horizontal spindle Short-Stop electronic spindle brake system Electric/pneumatic spindle lock system for quick changeover of heads Axial and radial movements lock system for each spindle Adjustable "constant pressure" pneumatic overhead feed rolls All spindles individually adjustable up/down and laterally from the front of the machine Pneumatic chip-breakers and spring-loaded hold-down shoes (1) adjustable infeed pneumatic lateral pressure roller (2) adjustable pneumatic lateral pressure rollers opposite right vertical spindle (2) powered and multiple idler rollers in table 4” wide “SUS”, stainless steel bed insert along entire length of fence side of machine Heavy duty spindles with precision sealed and lubricated bearings Centralized lubrication system All operation switches mounted on main remote control panel “JOG/auto” feed, up/down adjustment, & e-stop switches also on outfeed end of machine (2) 7”diameter & (3) 6” diameter dust outlets Includes moulder heads, feed wheels, manual, and additional accessories 12' x 8' x 6' approx. overall moulder dimensions & 40” x 28” x “ approx. electric cabinet dimensions Weighs approx. 15,000 lbs.
Equipment Location:SOUTHEAST
Bob Dykstra
800-374-5009 ext:378