• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
3 Results Found for Edgebander Viewing 1 - 3 of 3 results
RECENTLY ADDED
STANDARD LISTINGS
HOMAG KL 73/A3 - SE-9300 ... Production EdgebanderWorking Capacity:0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM).Equipped with: -- Hot Melt Glue System "QA 34" # 2123: with reversible glue roller applicator; -- Edge Magazine HL-15 # 2435: Two (2) vertical coil magazine, coils 0.3 - 3.0 mm. -- Pressure Section # 2506: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses. -- HOMATIC "NC 21" Control System # 6202: Industrial PC and PLC programmable memory control system w keyboard, LCD 10.4" display and line control.Workstations: -- End Trimming HL 81 Unit # 3047: Light weight, high speed (2 x 0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel. -- Flush/Pre-Trimming Unit # 3201: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° angle adjustment, manual positioning with digital counters. -- Bevel/Fine-Trimming Unit # 3216: Top & bottom fine or bevel trimming 2 x 0.4 KW (0.5 HP), 12000 RPM motors, max. edge thickness 8 mm (5/16"), tilts 0 - 30° with manual digital counter positioning. -- Buffing Unit (Custom): 1st, top and bottom 2 x 0.25 kW - 2,850 RPM, incline and height adjustable with top pressure beam. -- Buffing Unit # 4402: 2nd, ocillating top and bottom 2 x 0.25 kW - 2,850 RPM, incline and height adjustable with top pressure beam.Complete with & Features: -- Electronic DC brakes on all trim motors; sound cabin for all workstations. -- Adjustable outboard panel support with swing out arms for up to 800 mm. -- 80 mm Feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations.U.S. Model Designation: SE-9300
Equipment Location:PACIFIC NORTHWEST
Karl Balg
800-374-5009 ext:355
HOMAG KL 73/A3 ... Production EdgebanderWorking Capacity:0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM).Equipped with: -- Hot Melt Glue System "QA 34" # 2123: with reversible glue roller applicator; -- Edge Magazine HL-15 # 2435: Two (2) vertical coil magazine, coils 0.3 - 3.0 mm. -- Pressure Section # 2506: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses. -- HOMATIC "NC 21" Control System # 6202: Industrial PC and PLC programmable memory control system w keyboard, LCD 10.4" display and line control.Workstations: -- End Trimming HL 81 Unit # 3047: Light weight, high speed (2 x 0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel. -- Flush/Pre-Trimming Unit # 3201: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° angle adjustment, manual positioning with digital counters. -- Bevel/Fine-Trimming Unit # 3216: Top & bottom fine or bevel trimming 2 x 0.4 KW (0.5 HP), 12000 RPM motors, max. edge thickness 8 mm (5/16"), tilts 0 - 30° with manual digital counter positioning. -- Empty Workstation Slots: (2) for potential add on of Profile and/or Flat Glue Scraper Units -- Buffing Unit # 4402: Oscillating top and bottom 2 x 0.25 kW - 2,850 RPM, incline and height adjustable with top pressure beam.Complete with & Features: -- Electronic DC brakes on all trim motors; sound cabin for all workstations. -- Adjustable outboard panel support for up to 800 mm. -- 80 mm Feed track pads; Motorized top pressure beam with V-belt and Sound/Safety enclosure over workstations.EXTRAS: 2nd Glue Pot.
Equipment Location:WESTERN CDN
Ed Webb
800-374-5009 ext:377
HOMAG KL 73/A3 ... Production Edgebander -- Working Capacity: --0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM).Equipped with: -- Hot Melt Glue System "QA 34" # 2123: with reversible glue roller applicator; -- Edge Magazine HL-15 # 2435: Two (2) vertical coil magazine, coils 0.3 - 3.0 mm. -- Pressure Section # 2506: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses. -- HOMATIC "NC 21" Control System # 6202: Industrial PC and PLC programmable memory control system w keyboard, LCD 10.4" display and line control.Workstations: -- End Trimming HL 81 Unit # 3047: Light weight, high speed (2 x 0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel. -- Flush/Pre-Trimming Unit # 3201: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° angle adjustment, manual positioning with digital counters. -- Bevel/Fine-Trimming Unit # 3216: Top & bottom fine or bevel trimming 2 x 0.4 KW (0.5 HP), 12000 RPM motors, max. edge thickness 8 mm (5/16"), tilts 0 - 30° with manual digital counter positioning. -- Profile Scraper: Top/Bottom, for radius scraping, 1,2, 3 mm thick pvc edges. "HD" Workstation with large horizontal/vertical copy wheels and digital read-outs for profile knife positioning. -- Empty Workstation Slots: (1) for potential add on of Flat Glue Scraper or Grooving/Shaper Station. -- Buffing Unit # 4402: Oscillating top and bottom 2 x 0.25 kW - 2,850 RPM, incline and height adjustable with top pressure beam.Complete with & Features: -- Electronic DC brakes on all trim motors; sound cabin for all workstations. -- Adjustable outboard panel support for up to 800 mm. -- 80 mm Feed track pads; Motorized top pressure beam with V-belt and Sound/Safety enclosure over workstations.
Equipment Location:NORTHEAST
Ed Webb
800-374-5009 ext:377