• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
100 Results Found for Hogs and Wood Grinders Viewing 1 - 20 of 100 results

Circular-Saws

Band-Saw-Blades-Wide

Wear-Parts

Tools

Chipper-Parts

Wear-Parts

Chainsaw

Mechanical-Harvesters

Marking-and-Tally
Find More Supplies
PREMIUM LISTINGS
Montgomery 33 CS KC Grinder with 200HP Electric Motor, S/N 2955
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
West Salem 4048B Electric Wood Hog, Just Like New, Excellent Condition - Very Little Use Since New! Original Screens, Factory Refurbished, 250HP, $125,000 obo 800-816-8524
Equipment Location:Zeeland, MI
Michigan Wood Fibers
616-875-2241
STANDARD LISTINGS
Acrowood Hog
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
ARASMITH Bark Grinder - 45 x 63-1/2 inch top feed opening drum style bark hog. Features 50 inch diameter drum with fixed teeth. Serial HH-1368-692. Top feed, bottom discharge. 20 tons per hour or more capacity. 200-300 HP recommended. see our entire inventory at www.benjones.com
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
Better Built Bliss Industries Eliminator Swing Hammer Hog 19" x 24" Throat & 2" Screen Holes
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
Equipment Location:Birmingham, AL
Ellison Sales, Inc.
503-244-0161
CHALLENGER CH300-4055-S Horizontal Grinder; for grinding large slabs and rippings.Equipped with: -- 75 HP drive motor drives an 18" dia. rotor, 36" in length with diamond shaped cutters, inlet of 39"wide x 7-1/2" high. -- Includes: 3/4" Baffled screen. -- Rotor recently repaired, new back supports welded in and new tooling fall 2015.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
Champion Hammer Mill 18"x30" opening, 1/8" Screen Holes, Approx 10 to 12 ton and Hour, Came out of Pellet Mill, 44" Diameter rotor tip to tip Serial # 63065. Parts available through Champion. Motor Has Been Removed
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CRESSWOOD Horizontal Grinder - 2007 30 HP low rpm, horizontal grinder with power feed. Features load sensing controls and 15' vibrating infeed conveyor. Located in Florida panhandle. Visit www.benjones.com for our complete inventory.
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
Horizontal feed, low RPM grinder, 5" x 24" feed opening and aggressive feed roller infeed system. -- Equipped with: 10" Dia. x 24" wide grinding rotor head with (42) indexable cutters. -- 40 HP main drive motor; rotor grinds at approx. 400 RPM. -- Aggressive counter weighted feed roll system can process hard woods and soft woods - green or dry, at rates of 900-4,000 Lbs/Hr. -- Dust collection outlet with 10" OD.
Equipment Location:SOUTHEAST
EX-FACTORY INC.
704-841-2001
CRESSWOOD EF-36-60 Horizontal feed, Low RPM Grinder36" Feed opening and pinch type aggressive feed roller infeed system feeds rippings and blocks. -- Equipped with: 36" Wide x 10" dia. grinding head; indexable cutters, rotor grinds at approx. 300 -400 RPM; 60 HP main motor. 10" diameter dust collection port. -- Feed system consists of a 45' x 36" wide vibratory conveyor with 7.5 HP motor. -- Complete with NEMA 12 control box with motor controls. -- Includes: 3/4", 1" and 1-5/8" Interchangeable screens; new replacement teeth, bolts and anvil, electro-magnet for metal separation.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
Horizontal feed, low RPM grinder, 7" x 50" Feed opening and pinch type agressive feed roller infeed system feeding up to 17 FPM. -- Equipped with: 50" Wide grinding head with indexable cutters, rotor grinds at approx. 425 RPM; 75 HP main motor. Chip collection outlet with 12" OD auger discharge pipe. -- Includes interchangeable screen (2" & 1-34" hole sizes) -- Feed system consists of a 50" wide x approx. 12' long vibrating conveyor. -- Complete with NEMA 12 control box with motor controls, 100 amp disconnect which accomodates all the components, variable feed drive for feed roll; access door mounted amp meter.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
CRESSWOOD EF-72-100 DST Horizontal Feed, Low RPM, Low Noise Grinder: 72" Feed opening and pinch roller infeed system feeding @ up to 17 FPM. -- Equipped with: 72" Wide grinding head with indexable cutters, rotor grinds at approx. 62 - 98 RPM; 100 HP main motor. -- Interchangeable screen (1" installed). -- Complete with: 240" Long x 72" wide vibratory infeed conveyor with 5 HP motor, 144" x 27" vibratory outfeed discharge conveyor with 2 HP motor. -- Electrical controls and panel, including BENSHAW REdiStart Micro II Control; access door mounted amp meter. -- Includes: Electro-Magnetic Conveyorized Metal Separator.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
Equipment Location:Lansing, MI
Ellison Sales, Inc.
503-244-0161
CRESSWOOD HF-30-25SR ST Low RPM Waste GrinderEquipped with: 25 HP Drive motor, 10" Rotor diameter, 30" Rotor length, (54) indexable, replaceable cutter inserts. -- The cutting chamber is 30" x 39", hopper volume is 1.25 cu. yards, and floor area of the unit is 84" x 53". -- Features: Ram assembly includes a machined ram with a 25" ram stroke, premium quality top and bottom guides, and an over sized cylinder rated for 3,000 PSI (over twice its operating pressure). -- Complete with: PLC control and includes load sensor, hour meter, digital cutterhead amp meter, and auto-reverse at start-up. (1,418) Total operating hours only!
Equipment Location:MIDWEST
EX-FACTORY INC.
704-841-2001
CUSTOM BUILT 3O HP Horizontal Wood Waste Grinder; 30 HP drive motor, 8" discharge outlet. -- Features: Infeed traction drum designed to feed material into grinding chamber; 12" wide infeed opening, 7/8" sizing screen; newly re-tipped carbide cutting teeth; newly re-tipped carbide anvil. -- This unit was taken from service and fully refurbished. Additional cutter also made for this unit.
Equipment Location:MID ATLANTIC
EX-FACTORY INC.
704-841-2001
GROSS GL6S Vertical Wood Grinder:Vertical hopper-fed low-noise Grinder, 31-1/2" x 39" hopper opening at the top plus the funnel hopper, approx 1.1 cu/yds capacity. -- Features: ● 25 HP Rotor motor and 10-1/2" dia. rotor. Rotor Design utilizes "Delta Cutting System" that incorporates 3-sided, bolt-on, indexable cutters. ● Hydraulic ram optimizes feed pressure by monitoring rotor motor amperage, lateral force on the ram is minimized by a unique "U-Joint" mounting system. -- Includes: ● Heavy Duty structural steel frame, welded construction. Integrated "plug-and-play" electrical control system with UL approved components.8" Dia. collection outlet (1,200 CFM required).
Equipment Location:EASTERN CDN
EX-FACTORY INC.
704-841-2001
Gruendler Wood Hog •Model 24-3 •Horizontal feed •Serial# 21444, •GE 75HP 220/440 volt 1775 RPM main motor, •Direct drive, 3/4HP infeed motor for feed wheel, •Bottom discharge is 10 inch diameter . •Hammers are 1 1/2 in width. •Rotor width is approx. 24 inches. • Infeed opening is 3 inches tall, infeed opening width 17 1/2 inches. •We can quote you a delivered price to your location. stored inside. motor test available
Equipment Location:Toledo, WA
Machinery Scene
360-864-2800
GRUENDLER MDL 2XB GRINDER W/30HP MOTOR S/N 20847 LPS# 00307
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351
JACOBSON QUALITY MACHINERY,HAMMER TYPE,125 HP MOTOR, BARN SWEEP UNDERNEATH GOES WITH IT,1 1/2' SCREEN HOLES.
Equipment Location:Yuma, TN
LPS Equipment & Acquisition Co.
731-986-4351