Equipment For Sale

6 Head Resaw with Auto Run-A-Round

Four Head Wood-Mizer Resaw. No run-around. 8" capacity. Powered by hydraulic motors. Call 800-459-2148 for more info.

2002 Wood-Mizer Self centering 2 saw edger with trailing outfeed and vibrating deck and conveyor. Cap 2" - 48" Includes Morbark 3 knife chipper with extra new chipper knives. Edger and chipper combo with outfeed conveyor 40'. Call 800-459-2148 for more info.

Woodmizer HR1000 Horizontal Resaw, very low hours. Asking $27,500

Woodmizer LT 70 Sawmill with Log Deck and Powered Off Feed Table - Super Wide - Purchased in Jan 2019 - Hours 3,305 - Excellent condition - 55 HP Diesel - 36" max log diameter with 28" max width of cut and 20' 2" length of cut - Current price new $85,000 + tax and delivery with a 60 week lead time. - Our price $65,000 (sawmill only) Optional Options: - Auto Log Deck 20ft @ 35" high $12,000 (great condition) - Powered Off-Feed Table $8,000 - 3ea Woodmizer dead roller table $1,000 ea. (available, not included) - New Price for sawmill, log deck and powered off feed table is around $110,000 - Buy the Sawmill, Log Deck and Off-Feed table for $82,000: Save $3,000 - $88,000 for all components. (Sawmill, Log Deck, Off-Feed Table, 3 dead rolls.) Call 800-459-2148 for more info.

REDUCED TO SELL!! Wood-Mizer LT-300 W/ Infeed log deck, outfeed incline belt LT300, 3-way outfeed conveyor, includes extra blades, 9,400 hours - Wood-Mizer 24 x 19 belt outfeed conveyor and electric drive, S/N 10004089A2.00 - Wood-Mizer TD2D12 3-way separator, S/N 1004027A1.00 - Wood-Mizer 25.5’ (2) strand log infeed deck w/ hydraulic stop & load & hydraulic drive Complete mill (ref # 162) Call Amy for more information (928) 723-9449

Wood-Mizer 12' (2) strand custom log deck, Excellent Condition (Rarely Used)... Contact Amy for more information (728)723-9449

Wood-Mizer EG100 #20380 - 220V single phase - 10 HP electric motor - Both extension tables - Probably around 1000 hours (no meter) - Speed knob is broken. Seller ran it by himself and it worked fine on slow speed. - Safety switch was disconnected as it kept tripping. Call 800-459-2148 for more info.

55hp diesel engine w/60hr. This always under cover very well maintained, includes a pedestal control station w/ fully proportional joystick controls allowing the operator to be positioned anywhere to control all hyd. head & bed functions hr. on control arm, debarker, Lube-Mizer, 6 box of blades. Call 432-507-7670 for more info.

2002 Wood-Mizer LT70. Original Owner. 25 HP 3 phase electric motor. Band width 1.5 ". Infeed length 20'. Infeed width 8' with stop and load. Outfeed length 20' incline with 3 way sort. Outfeed width 32". Cap 20' x 38". Includes 26' two strand green chain brow. Call 800-459-2148 for more info.

2004 Wood-Mizer LT40H Portable Sawmill - 1 owner - 28 HP Kohler gas engine with 5200 hours - Mill currently in operation - Debarker - LubeMizer - Extra loader cylinders, clamp cylinder and many other spare parts and blades - Shingle and Lapsider - Cook's Sharpener, Setter and Blade Straightener. - Road Ready Call 800-459-2148 for more info.

2001 Wood Mizer LT40 Super Hydraulic - Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks - Replaced the hydraulic motor for the re-saw and replaced the guides. - 25HP Electric Motor. - Road ready. - Can be switched to portable power. Diesel costs around $4000 from Wood-Mizer. Call 800-459-2148 for more info.

New Razor Tip Carbide Blades for Wood-Mizer LT15 Box of 5 #BC3751587S) 0.045 x 1 1/4 x 158;7° Tooth Spacing: 7/8 Price is same as Wood-Mizer. Buyer pays for shipping. Call 800-459-2148 for more info.

Woodmizer LT40 Wide Super Hydraulic Sawmill, with electric motor, 230 hours. Asking $31,000

#146 • 2014 Wood-Mizer WM4000 Thin Kerf Stationary Band Mill SN: WM4000D1205140461A402. Meter reads: 20,184 hours. Powered by: 30 hp electric. Hydraulic: Yes, fully automatic. Log capacity: 18' bed. Throat capacity: 30" Setworks: Yes, Wood-Mizer (new updated setworks!) Debarker: No. Bed extensions: No. Features and Notes: 1 1/8" x 25" steel wheels, 24" x 7'6" outfeed belt, pantograph arm, 15 hp electric hydraulic pack, 5' x 5' operators cab with controls, heat/AC unit, Setworks (PLC & HMI) has been upgraded in the last 1000 hours! This mill is a real production mill that is ready for you. Owner has some new parts including head lifting screw and gearbox that sell with the mill. Contact Eugene with any questions 574-242-1100. Location: 110 W Kittle Road, Mio, MI 48647

2022 Wood-Mizer LX25 Manual push mill. No power feed. This mill can be converted into a resaw with use of a belt. 7 HP gas engine. Cap 26" x 32.5' with 20' extension. Mill has been made portable. Mill is stored under cover.

A Super Hyd. mill, 65 hp Yanmar 1047 hr. electronic setworks, in excellent condition. Call 937-464-6705 or 765-744-3268 for more info.

2018 Wood-Mizer LT40 Wide Super Hydraulic - Fully Hydraulic - Wide increases max width of cut to 34" - Diesel engine with 1800 hours - Portable - Debarker (not connected) - Lubemizer - Fine Adjust Legs - Remote Operating Station - Cap: 36” log diameter, 21’ log length, and production up to 675 bf/hr. Call 800-459-2148 for more info.

Wood-MIzer LT300 Cab W/Setworks Approx 4K Hours Mill alone or complete operation available Motivated seller

2007 Wood-Mizer LT300 3400 hours 3 phase Great condition Includes 80 new blades and upgraded steel spindles with new bearings