Equipment For Sale

Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through the holes of a perforated screen covering the discharge. Interchangeable screens offer hole sizes ranging from 0.6mm to 25mm. Milling chambers are constructed of high strength cast iron plates with bolted construction that eliminates common stress points to prevent cracking. After extended use, this method of construction allows fast, easy, on-site replacement of worn parts. Built for the demands of commercial and industrial grinding, Hippo mills are fast, efficient and durable, and their low cost won't break your material processing budget. The Hippo #69 hammer mill is IN STOCK and available with or without a 60HP electric motor and starter or VFD. The motor is a 208/230/460VAC, 60hz, 3-phase inverter duty rated motor. The enclosed starter is available for either 230 or 460VAC 3Phase power input. The VFD is available for either a 230 or 460VAC 3Phase power input. The starter or VFD is NOT pre-wired to the motor or to the power supply. The VFD can be programmed to reduce the rotor shaft rpm. Slowing the speed of the rotor shaft can increase the likelihood of getting a coarser grind in hemp and other products, while still utilizing the material handling fan to move product from the mill to the material collecting cyclone. Hippo hammer mill grinders feature rigid hammers with reversible, replaceable tips of long wearing, impact and abrasion-resistant Bennox steel. The screen is located in the bottom half of the grinding chamber, covering an arc of about 180°. Milled material is transported from the discharge of the mill by an impeller fan mounted on the drive shaft, and delivered to the cyclone and dust separator. Suction created by the material handling fan aids transport of the product through screen holes. Stock interchangeable screens are available with hole sizes of 0.6, 0.8, 1.0, 1.2, 1.6, 2, 3, 5, 6, 10, 15, 20 and 25mm. The top half of the milling chamber swings open for full access to the hammers and screen, and screens can be changed out in just 30 seconds without tools. To see more information on the Hippo #69 hammer mill, to include specs and output rates, go to the Pleasant Hill Grain Hippo #69 webpage: https://pleasanthillgrain.com/industrial-hammer-mill-hammermill-grinder The $7,850 price listed is for the Hippo #69 hammer mill only; no motor, starter, crate fee or freight shipping costs. Call 866-467-6123 for pricing options.

Hippo hammer mill grinder machines rapidly pulverize a wide range of materials from grain, beans, herbs and fibrous roots to minerals, plastics, glass, bone and recyclables. Materials enter the milling chamber and are impacted by hammers rotating at high speed. Size reduction occurs until particles can exit through the holes of a perforated screen covering the discharge. Interchangeable screens offer hole sizes ranging from 0.6mm to 25mm. Milling chambers are constructed of high strength cast iron plates with bolted construction that eliminates common stress points to prevent cracking. After extended use, this method of construction allows fast, easy, on-site replacement of worn parts. Built for the demands of commercial and industrial grinding, Hippo mills are fast, efficient and durable, and their low cost won't break your material processing budget. The Hippo Baby hammer mill is IN STOCK and available with or without a 5HP electric motor and starter or VFD. The motor is either a 220VAC, 60hz, 1-phase heavy duty rated motor or a 208/230/460VAC, 60hz, 3-phase inverter duty rated motor. The enclosed starter is available for 220VAC 1Phase or 208, 230 or 460VAC 3Phase. The VFD is available for a 220VAC 1Phase power input or 208, 230 or 460VAC 3Phase power input. The starter or VFD is pre-wired to the motor but not to the power supply. The VFD can be programmed to reduce the rotor shaft rpm. Slowing the speed of the rotor shaft can increase the likelihood of getting a coarser grind in hemp and other products, while still utilizing the material handling fan to move product from the mill to the material collecting cyclone. Hippo hammer mill grinders feature rigid hammers with reversible, replaceable tips of long wearing, impact and abrasion-resistant Bennox steel. The screen is located in the bottom half of the grinding chamber, covering an arc of about 180°. Milled material is transported from the discharge of the mill by an impeller fan mounted on the drive shaft, and delivered to the cyclone and dust separator. Suction created by the material handling fan aids transport of the product through screen holes. Stock interchangeable screens are available with hole sizes of 0.6, 0.8, 1.0, 1.2, 1.6, 2, 3, 5, 6, 10, 15, 20 and 25mm. The top half of the milling chamber swings open for full access to the hammers and screen, and screens can be changed out in just 30 seconds without tools. To see more information on the Hippo Baby hammer mill, to include specs and output rates, go to the Pleasant Hill Grain Hippo Baby webpage: https://pleasanthillgrain.com/small-hammer-mill-hammermill-grinder The $2,800 price listed is for the Hippo Baby hammer mill only; no motor, starter, crate fee or freight shipping costs. Call 866-467-6123 for pricing options.

Brand new AKKUSLAR Model CBK 600 multi cut & double end trimmer 6.2" to 19.6" w/ controls mounted on machine. 5 Saw with 4 easy slide and lock movable saws 7.5 HP each motor. Electric Feed Through sharp chains. Includes a set of wear parts. Lead times for US Only for a quick turnaround will be for a limited time only. Price and performance will amaze you with this 50 year manufacture of sawmill machinery. Quality and performance with every cut simple handling and operation easy access for maintenance also available in a 16' trimmer This machine includes a set of 5 saws at no additional charge. Call Kittrell Sawmill Brokers for more information (931) 797-6284

This bull type gang edger is truly the beast. Arbor runs up to 8 saws with a combination arrangement that fits your needs. 4 3/4 inch X 25.5 inch input with the output of 1/2" to 4-3/4" with 6-1/4 thick capability. Cutting process is provided with diamond circular saws, single saw shaft is fixed. Hydraulic roller with fence. Infeed top press roll is hydraulic. Cut grade, pallet stock or pallet cants with this mighty machine comes with a set of spare parts. Call 931-797-6284

Brand new Double Arbor Gang Saw. In stock price will not be available after this machine sells. This one is 8". This machine is a durable heavy duty machine with 50 plus years experience behind it. MCC and operator console included. This is a limited offer as this machine comes with one complete set of saws. comes with a set of spare ware parts. Parts are stocked in the US by Kittrell Sawmill Brokers FOB Columbia, TN Will load on your truck. Call Jackie 931-698-3342. Retail price $225,000 save $26,150 Quality and performance with every cut Simple handling, operation and maintenance. Call Kittrell 931-797-6284

T72Y20 3 phase electric screen $59,000 301-639-7122

460V | 2021 | New Condition | Return Conveyor

2019 Baker 2 Head C Model Resaw 480V Return belt with slide

Baker double board edger. Works as it should, very little use. Asking $10,500 . Call Saul at 859-322-5126

For sale - Baker Band Resaw, Model #: BBR-0, Serial Number: 08-3983 with little use. Three phase 40 HP main drive motor and 10 HP conveyor feed motor. Variable speed from 20 to 100 fpm. Capable of handling material capacity up to 18” x 18”. Approximate weight of the saw is 6,000 lbs. Saw in great condition and has been used very little since purchased. Located in Jackson, WI. Shipping coordination available. Listing price: $25,000 Contact: Steve Wagner 651-393-2733

2015 Bandit 2290 Towable Whole Tree Chipper Now in Stock! - 2,517 Hours - 20 inch Capacity - CAT C13 Engine w/ Tier 3 Emissions and 440 HP - Wireless Remote - Adjustable Discharge - Engine just serviced - Infeed chain, yoke, and feed wheel recently repair and resurfaced Call Quality Equipment & Parts today for more information!

LIKE NEW BARKO 495B w/ LOADER AND ROTOBEC 060CHD GRAPPLE ONLY NOW AVAILABLE! Take advantage of this sale we have going on. Put this package together with your current trailer. This 495B is equipped with these options: Circle Slasher package (dedicated pump & controls), 32' Straight boom 495, Double V Heel Bar, Sun Roof Shade, Air Ride Seat, 3,000 LB Cast Counterweight, Pilot control dampener, Delimber package add on for Circle saw package, electric hydraulic fill pump. REACH OUT TO THE QUALITY EQUIPMENT TEAM TODAY!

2015 Barko 260, 8250 hrs, tier 3 (NO DEF) 6.7 Cummins, dangle head Log max 7000XT with top saw, Fire suppression, pro heat preheater system, double grousers, recent front window replacement, very tight and dry machine. $235,000 802-579-9655

LOT 206 · 2022 Barko 595B Tracked Knuckleboom Loader w/ rotobec Log Grapple w/Slasher, 151 hrs (at time of write up)

2016 Barko 260B, 6.7 Cummins, 7600 hours, Logmax 7000XT with top saw, 1 owner, all service records, fire suppression system, working daily, $245,000, Mike 802 579 9655

2010 Barko 295ML Magnum Knuckleboom, 8300 hours, good working condition.$70,000 270-528-1537

Barko 160B, Deere engine, levers, strong machine. Mounted on 1994 Ford $16500

Like New Barko 495B Tracked Log Loader, 537 Hours. Ready to work.

2022 Blockbuster Model 22-22, Operator Cab Single Lever Control w/ Heat & A/C, 74 HP Doosan Diesel Engine – 1,000 Hrs Approx., 30” Harvester Bar & Chain / Auto Tensioner / Estop / 24? Dia Cut Capacity, 16’ Infeed Chain Driven Log Trough, 10’ Hyd. Folding Live Deck w/ 3-strands up to 24’ logs, 5” Cylinder w/ Adjustable 24” Stroke / 4.5 Sec Cycle, Tandem Axles w/ Brakes, 50 Gallon Hydraulic Tank w/ Oil Cooler, 4-, 6-, 8-, & 12-Way Wedges, 30’ Hyd Lift & Roller Chain Conveyor, Located in CT, USA · $145,000 CAD · Contact [email protected] / 1-647-465-5507

Complete 2004 KMW Wood Fired Boiler 300 BHP Currently disassembled, has not been used for 6 years. Have all the blue prints on the boiler. Very nice unit, only selling because property was sold and it had to be removed. A new one goes for $250,000.00. Need to sell, make an offer please call 1-559-647-9834. Located in Hanford, CA 93230 Boiler weight 26500 lbs Boiler information: Boiler Smith Canada Boiler Maker Module- LFBLW-2200 SF-X-30 CRN- LD785.2 BLR Press 30 SN- 511 471 04 HS - 2200 SQ FT Blower Daltec Module- IE 19 DAW 19 KCCW UB Arr +9 SN- 039458 HP- 30