• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
5 Results Found for Lathes and Carvers Viewing 1 - 5 of 5 results
RECENTLY ADDED
STANDARD LISTINGS
3,100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. of 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. -- 6" (150 mm) Hydraulic tracing stroke. 5.5 HP (4 kW) drive motor, electronic variable spindle rotation speeds from 300 - 3,200 RPM, carriage speed infinitely variable feed by DC drive 0 - 15.5 FPM. -- Spindle Shaft: Double, precision, sealed ball bearings; "M-33" thread, "MK-3" inside cone. -- Tailstock: Heavy Duty design w/ex-center quick action "MK-2" quill cone. -- Electric: VDE w/Under-voltage protection and lockable switch; "IP 54" type of protection. -- PLC/Microprocessor, stores data for each job & automatically recalls the settings (i.e., feeds/speeds, settings, etc.). -- Template follower system accepts sample turnings or flat plate profiles; hydraulically operated copier. -- Complete with: 30 - 60 mm 4-Jaw chuck follower rest, variable (1-1/4" to 2-3/8"); special "MK-2" live center with pressure ring, "MK-3" 6-pronged dog, 30 mm dia. lengthened. -- Ring follower rest from 15 mm - 70 mm with precutter; (1) set insert for ring follower rest dia. 20 mm - 70 mm. -- Complete with: Knife sharpener, milling head for spiral, twist, etc., and all accessories as pictured.
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP 5000/Hydro Hydraulic Copy Lathe with two copier knives.General data: 63" (1600 mm) Max. between centers, approx. 59" copy length, 2.5 HP main motor, (6) speeds 600 - 900 - 1,200 - 1,500 - 1,800 & 3,000 RPM; 0.5 HP motor feed drive for carriage with tool post & revolving traveling steady rest with pre-rounding tool.. -- Copy System; Turning accomplished with a two (rough & fine) Tantung gouge powered hydraulic copying unit with highly-sensitive tracer requiring only 2.3 ounce pressure, 5.9" (150 mm) stroke, working on both wooden samples and profile templates. -- Traveling Steady Rests/Copying range: (3) traveling steady rests, (4) Jaws Follower, infinitely variable with approx. size range (1.2" - 3.9'); 30 - 60 mm, 50 - 80 mm, and 60 - 100 mm, 3-1/2" Max. part dia. with revolving steady rest, 5-7/8" max. with copying unit, 9-5/8" max. for manual turning. Capable of (2) working passes on the profile. -- Includes: Push button electric controls, integrated chip/dust hood, electric spindle brake, and spindle reversing gear to change from copying to manual working.
Equipment Location:SOUTHEAST
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP-5000/HYDRO Hydraulic Copy Lathe. -- Specifications: 62-3/4" Max. chucking cap., 59" copy length and 9-3/4" max. turning dia.; (1) 2.3/1.75 HP two-speed spindle motor, 0.5 HP DC motor feed drive for carriage. Feed electronic infinitely variable 0 - 11.5 FPM; innovative hydraulic tracing device with 6" stroke and only 2-3/8 ounce pressure, center height 9-27/32". -- Includes: (1) HSS Copy lathe tool, original sample tracing device, dust collection hood, return speed of carriage. -- Complete with the following options: 4-Jaw chuck follower rest 30 - 60 mm (1-3/16" - 2-3/8"), 4-jaw chuck follower rest (2-3/8" - 3-15/16"), live center "MK-2", pressure ring, precision setting of depth, left & right run with slip-off safety device, hand rest for subsequent cutting by hand on support, faceplate for bowl turning.
Equipment Location:MIDWEST
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP-5000-NC-3100 Hydraulic Copy Lathe with NC(PLC) Control and Spiral/Twist attachment. -- Capacity: 3100 mm (122") Max. between centers, 118" standard max. copy length, 9.8" (250 mm) max. height of centers, max. copying dia. 10-1/4" (260 mm) longitudinal and 19-5/8" (500 mm) transversal. -- Copier: Hydraulic Copier with 6" (150 mm) tracing stroke. Spindle/carriage drive: 5.5 HP (4 KW) spindle drive motor, electronic variable spindle rotation speeds from 300 - 3,200 RPM, carriage speed infinitely variable feed by DC drive 0 - 15.5 FPM. -- Features: Spiral/Twist/Flute Milling attachment with 0 - 24,000 RPM infinitely variable speed control; PLC unit controls indexing and leads for twist and flute work . Also PLC/Microprocessor stores data for each job and automatically recalls the settings, ie. feeds/speeds, settings, etc. -- Control Panel: Operator conveniently mounted on carriage. Main control panel w/PLC etc. mounted at rear of machine. Electric VDE w/under-voltage protection and lockable switch, "IP 54" type of protection. . -- Template follower: System accepts sample turnings or flate plate profiles. -- Spindle Shaft: Double, precision, sealed ball bearings, "M-33" thread, "MK-3" inside cone. -- Tailstock: Heavy Duty design w/ex-center quick action "MK-2" quill cone. -- Complete with: 4-Jaw chuck follower rest 30 - 60 mm, variable (1-1/4" to 2-3/8"); special "MK-2" live center with pressure ring, "MK-3" 6-pronged dog, 30 mm dia. lengthened; ring follower rest 15 mm - 70 mm with precutter, (1) set insert for ring follower rest dia. 20 mm - 70 mm -- Includes Transformer: 14 KVA , 400/220 V to connect lathe on 220/3/60 electrical supply, if needed . -- Note: Steady rests included are pictured in blue. -- Machine dimensions: Length 4,330 mm (171"); Width 1,200 mm (48"); Height 1,600 mm (64"). Weight 1,100 kg (2500 Lbs).
Equipment Location:SOUTHWEST
Tony Cornacchione
800-374-5009 ext:432
HAPFO AP-5000 HYDRO KING Hydraulic Copy Lathe with Rope/Twist Feature. Turns balusters, newel posts, columns up to 96" in length with a max. dia. of 9-3/4" (without steady rest). -- Capacity: 98" (2500 mm) Max. between centers, approx. 96" (2400 mm) copy length. 3-1/2" Max. part dia. with revolving steady rest, 5-7/8" max. with copying unit, 9-5/8" max. for manual turning. -- Spindle/Feed motors: 2.5 HP spindle motor, (6) speeds 600 - 900 - 1,200 - 1,500 - 1,800 & 3,000 RPM. Carriage feed drive motor is 0.5 HP DC motor with infinitely variable speed. -- Copier: Turning accomplished with a single Tantung gouge on hydraulic copying unit on tool post with highly-sensitive tracer requiring only 2.3 ounce (65 grams) pressure. Pre-rounding tool. 5.9" (150 mm) stroke, working on both wooden samples and profile templates. -- Features: Spiral/Twist feature on KING model uses a far more powerful & quiet induction motor (not router motor). Will do a rope/twist on the full 96" of length. Length capacity extended slightly by owner. -- Includes: Revolving travelling steady rest. Capable of (2) working passes on the profile. Dust hood. -- Controls: Push button electric controls conveniently mounted on carriage; integrated chip/dust hood, electric spindle brake, and spindle reversing gear to change from copying to manual working.
Equipment Location:SOUTHWEST
Tony Cornacchione
800-374-5009 ext:432