• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
25 Results Found for Glue Equipment Viewing 1 - 20 of 25 results
STANDARD LISTINGS
Hot melt adhesive applicator with Bodine adjustable speed motor. -- Spray gun applicator. -- This unit also includes an extra Bodine adjustable speed motor regulator, for fine tuned glue application.
Equipment Location:WEST COAST
Torry Hiddema
800-374-5009 ext:371
26" Cap., top & bottom spreader, 6-1/2" dia. rubber covered application roll, flow controlled with 4-1/2" dia. rubber covered doctor rolls; 1 HP single speed drive at 88 FPM, lower elevator opening 0" - 3½" R/H hand wheel adjustment. -- Includes: safety guards.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS TOP AND BOTTOM GLUE SPREADER with 32" capacity. -- 6 1/2" rubber glue applicator rolls with 16 TPI Grooving, flow controlled by 4 1/2" Neoprene doctor rolls. -- Single speed feed drive motor - 88 FPM. -- Lower elevator opening 0" - 3-1/2". -- Complete with: Magnetic start and all guards and labels.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
44" Working width, 8-3/4" dia. EDPM coated rolls with 22 TPI , , 6-1/2" dia. chromed steel doctor rolls, upper elevator opening 0" - 4-1/2" with thickness adjustment Top/Bottom, Variable feed speed, approx. 30 - 88 FPM with 1.5 HP drive; Nema 12 electrics. -- Complete with: EX-PROOF WIREING, Push button magnetic starter, safety guards, safety reversing bar FOR CLEANING, and all warning labels. -- Can be designed as needed by buyer per request.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS 22-D-875-44 Top and Bottom Glue Spreader with 44" Working width. -- 8-3/4" dia. Neoprene coated apllication rolls with 16 TPI -- 6-1/2" dia. chromed steel doctor rolls. -- Upper elevator opening 0" - 4-1/2" with thickness adjustment. -- Variable feed speed, approx. 30 - 88 FPM with 1.5 HP drive, Nema 12 electronics. -- Complete with: Push button magnetic starter, safety guards, safety reversing bar for cleaning, and all warning labels.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS 22-D-875-56 Single Sided HOT MELT Glue Spreader;56" Cap. top coater, 8-3/4" dia. applicator roll currently chrome, flow controlled with 6-1/2" dia. chromed doctor roll set by single hand wheel adjustment. -- 1-1/2 HP motor, US variable speed drive, upper elevator opening 0" - 4-1/2" w/manual hand wheel adjustment. -- Both doctor and applicator rolls are heated by HEAT WM550 Thermal Oil system capable of temperatures up to 400° F. Uses oil based heat transfer fluids and electric heaters. -- Centrifugal pump is water cooled, expansion tank and features integrated control panel. All mounted on drip proof base.Includes, Supplied with: -- Safety guards, electrical disconnect box and magnetic starter. -- New Main Drive motor and gearbox. -- New Tidland Air Shaft . -- Additional Insulated Distribution Manifold for Hot Melt Glue.
Equipment Location:SOUTHEAST
Torry Hiddema
800-374-5009 ext:371
Black Brothers Top Only Glue Spreader with 56" working width capacity. -- 8 3/4" dia. Chrome applicator roll with Chrome doctor roll and flow is controlled by single hand wheel adjustment. -- 1-1/2 HP motor variable speed drive. -- Upper elevator opening 0" - 4-1/2" w/manual hand wheel adjustment. -- Includes: safety guards, electrical disconnect box and magnetic starter.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACKBROTHERS Top and Bottom Glue Spreader with 56" Working width. -- 8-3/4" dia. grooved coating rolls, 6-1/2" dia. Chrome doctor rolls with single hand wheel adjustment. -- Single hand wheel upper elevator opening from 0" - 4-1/2" -- 3 HP drive with variable speed control. -- Complete with: Nema-12 Electrics with fused disconnect, magnetic motor starter, push button controls, safety reversing bars, safety guards, and warning labels.
Equipment Location:WESTERN CDN
Torry Hiddema
800-374-5009 ext:371
62" Working width, 8-3/4" dia. "smooth surface" rubber coated applicator roll 24 TPI and 1/2 composite grooving, 6-1/2" dia. smooth hard rubber doctor roll, -- Lower elevator opening 0" - 4-1/2", -- Single speed of 88 FPM with 1.5 HP drive; -- NEMA 12 electrics. -- Complete with: Push button magnetic starter, safety guards, all warning labels. Subject to availability.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
62" Working width, 8-3/4" dia. neoporene coated rolls with smooth surface, approx. 60 durometer covering, 6-1/2" dia. hard neoprene doctor rolls, upper elevator opening 0" - 4-1/2" with thickness adjustment, Variable feed speed, approx. 30 - 88 FPM with 1.5 HP drive; Nema 12 electrics. -- Complete with: Push button magnetic starter, safety guards, safety reversing bar, and all warning labels.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS Top and Bottom Glue Spreader with 62" Working width, 8-3/4" dia. neoporene coated rolls with smooth surface, approx. 60 durometer covering, 6-1/2" dia. hard neoprene doctor rolls. -- Upper elevator opening with 0" - 4-1/2" thickness adjustment. -- Fixed speed of 88 FPM with 1.5 HP drive; Nema 12 electrics. -- Complete with: Push button magnetic starter, safety guards, safety reversing bar, and all warning labels.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
Black Brothers 22-D-875-68 Top Only Glue Spreader with 68" working width, 8-3/4" dia. Smooth Neoprene applicator roller, 6-1/2" dia. neoprene doctor roll, top roll applicator only, lower elevator opening 0" - 4-1/2", REEVES variable feed drive 1.5 HP. -- Complete with: Electrical interlocks, and safety shutoff bars.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS TOP and BOTTOM GLUE SPREADER with 74" working width, 8-3/4" dia. Neoprene coated application rollers and 6-1/4" dia. Neoprene coated doctor rolls. -- Upper elevator opening 0" - 4-1/2" -- 40 - 120 FPM Variable speed drive. -- Complete with: Push-button magnetic starter, safety reversing bar, safety guards and all warning labels.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS TOP AND BOTTOM GLUE SPREADER, with 72" Working width, 8-3/4" dia. rubber coated rolls, 7" dia. doctor rolls, upper elevator opening 0" - 3", --Complete with: Push-button magnetic starter, safety guards overhaul, safety reversing bars emergency stop buttons and all warning labels.÷Mounted on wheels for easier moving.
Equipment Location:EASTERN CDN
Torry Hiddema
800-374-5009 ext:371
32" Working width, 6-1/2" dia. EDPM coated rolls with 22 TPI , , 4-1/2" dia. chromed steel doctor rolls, upper elevator opening 0" - 4-1/2" with thickness adjustment Top/Bottom, Variable feed speed, approx. 30 - 88 FPM with 1.5 HP drive; Nema 12 electrics. -- Complete with: EX-PROOF WIREING, Push button magnetic starter, safety guards, safety reversing bar FOR CLEANING, and all warning labels. -- Can be designed as needed by buyer per request.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS 490-62 Glue Spreader -- 63" Cap., top & bottom opposed, -- max. 3-1/8" opening, grooved rubber spreading rolls, -- Glue film thickness adjustment micro-control by doctor knives on adhesive tray. -- 59 FPM feed speed, 1.0 HP feed drive.
Equipment Location:EASTERN CDN
Torry Hiddema
800-374-5009 ext:371
BLACK BROTHERS, ...Parts for Glue Spreader.Spare Rollers for BLACK BROS Roll Coaters. USED condition, some may have been recovered. -- (1) 68-1/2" Length, 11" dia. newly covered applicator roll (R11). -- (1) 44-1/2" Length, 9" dia. blue rubber (R13). -- (1) 44-1/2" Length, 8-3/4" dia. newly covered applicator roller (R22). -- (1) 68-1/2" Length, 11-3/4" dia. applicator roller, needs recovering (R26). -- (1) 68-1/2" Length, 8-1/2" dia. newly covered applicator roller but there is a groove in one end (R28). -- (1) 57" Length, 8" dia. applicator roller, needs to be recovered (R31). -- (1) 56-1/2" Length, 6-1/2" dia. used doctor roller, needs to be recovered (R32). -- (1) 57" Length, 8-3/4" dia. applicator roller, needs to be recovered (R33). -- (1) 51-1/2" Length, 6-1/2" dia. chrome doctor roller; broken shaft, needs to be resurfaced (R35). -- (1) 56-1/2" Length, 8-3/4" dia. smooth applicator roller; needs to be recovered (R36). -- (1) 56-1/2" Length, 8-3/4" dia. smooth applicator roll; needs to be recovered (R37). -- (1) 62-1/2" Length, 7" dia. doctor roller; needs to be recovered (R38). --÷ (2) 27" Length, 5" dia. newly covered smooth rubber applicator rolls (R41 & R42). -- (2) 27" Length, 6" dia. newly covered grooved applicator rolls (R43 & R44). -- NOTE: The photo with (5) rollers are R31 - R33 - R35 - R36 & R37. -- Price per Roller is ...$ 1,200.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
BURKLE CAK 1800 Top and Bottom Glue Spreader Specifications: -- Main motor 4Kw (5.3 HP) -- 74" Working width, 75" L x 11-1/4" diameter grooved rubber coated applicator rolls. -- 75" L x 9" diameter smooth doctor rolls with adjustment. -- Bottom collection pan. -- Bottom roller machine wheel option for floor track. -- Side operator control station. -- Mechanical numeric digital readouts for thickness. -- Safety stops.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
FISHER + RUCKLE - GLUEMASTER, ...Double-Sided Veneer Pack Edge Glue Application Machine.Thru-feed Double-Sided machine, which applies glue to both edges of a bundle of veneer in preparation for subsequent splicing/joining. -- Features: Powered roller infeed roller section with gravity pressure rollers (floating) on top of the bundle and pressure/guide both sides and top which straighten the stack if slightly warped, prevents slipping of the bundle, and prevents glue from entering between the single sheets of veneer. Bundles are locked-in prior to glue section. Accurately adjustable glue heads ensure a perfect glue joint, provides consistent results when changing veneer types, width, and/or thickness. -- Veneer Specs: Width is 1.77" (45 mm) min. to 20.25" (515 mm) max., Min length is 15.75" (400 mm), Max Length is continuous, Bundle height is 1.57" to 39" (40 mm - 1000 mm). -- Electrics & Drives: Glue Spreader motor is 0.3 kW, Total Connected load 1.8 kW, Electric Infeed eye, double palm safety switch, side mounted electric control panel with transformer and pneumatic glue mixer. -- Glue/Application: One touch glue applicator set up. Adjustable glue heads for quick width change.Useful on PVA or PVAC glue types. -- Includes: Approx. 15' Infeed and 10' Outfeed gravity roller conveyor. -- Note: Manufactured by MONGUZZI, in Italy for FISHER + RUCKLE.
Equipment Location:MIDWEST
Torry Hiddema
800-374-5009 ext:371
100 HP - 1800 RPM Belt driven. -- Jacketed water-cooled requiring 14 Gpm. -- All stainless wetting surfaces and replaceable stainless tools. -- 24" Inside diameter x 102" inside length. -- 14-1/2" x 18" inlet and 12" x 30" outlet. -- Capacity rating is 6,600 to 26,400 pounds per hour at 6 pound density.
Equipment Location:PACIFIC NORTHWEST
Torry Hiddema
800-374-5009 ext:371