Glue Equipment For Sale
Category
Glue Equipment
63 Results Found
Call for Price
HYDREX HPX48-1 Hot Press, Single daylight opening. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.Features (Overall): -- Board size up to 4' x 8', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time , emergency pedal, quad temperature protection device. -- (6) Cylinders (upstroke) -- 80 Tons of overall pressure, -- Recirculating Thermal Oil heated with package heaters housed in a boiler tank.Detailed Specs: -- 98" x 51" Thermal Oil heated Hot Press with drilled steel platens, 1.5" thick, 4" Max Working height.. -- (6) Hydraulic "upstroke cylinders", 85 mm dia.; rack & Pinion guide system for parallel closing of the platens. -- 80 Ton total pressure, 40 PSI specific pressure over the entire platen area; 4 KW (5.5 HP) hydraulic pump motor. Platen moving speed 5 FPM -- 1.5 kW (2 HP) Hot Oil circulation pump; approx. 120° C (248° F) max. operating temperature. -- Loading from (3) sides; 39-1/2" from floor with lower platen in the down position: heavy I-beam welded steel frame construction. -- "Safety" emergency Stop Cable around the operating sides of the machine, and E-STOP mounted on the control panel. -- Overall press weight is approx. 12,500 Lbs). Overall dimensions 129" x 65" x 102" high. -- Also available with (3) openings - 100 Tons and (5) openings - 100 Tons.
Call for Price
HYDREX HPX510-1 Hot Press, Single daylight opening. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.Features (Overall): -- Board size up to 5' x10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time , emergency pedal, quad temperature protection device. -- (8) Cylinders (upstroke) -- 120 Tons of overall pressure, -- Recirculating Thermal Oil heated with package heaters housed in a boiler tank.Detailed Specs: -- 122" x 61" Thermal Oil heated Hot Press with drilled steel platens, 1.5" thick, 4" Max Working height.. -- (8) Hydraulic "upstroke cylinders", 85 mm dia.; rack & Pinion guide system for parallel closing of the platens. -- 120 Ton total pressure, 40 PSI specific pressure over the entire platen area; 4.5 KW (6 HP) hydraulic pump motor. Platen moving speed 5 FPM -- 1.5 kW (2 HP) Hot Oil circulation pump; approx. 120° C (248° F) max. operating temperature. -- Loading from (3) sides; 39-1/2" from floor with lower platen in the down position: heavy I-beam welded steel frame construction. -- "Safety" emergency Stop Cable around the operating sides of the machine, and E-STOP mounted on the control panel. -- Features: "Last" (2) cylinders can be turned off to press shorter panels. - Overall press weight is approx. 19,500 Lbs).
Call for Price
HYDREX HPX510-1-160T Hot Press, Single daylight opening. Suitable for pressing High Temperature materials.Features (Overall): -- Board size up to 5' x10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time , emergency pedal, quad temperature protection device. -- (8) 100 mm diameter Cylinders (upstroke) -- 160 Tons of overall pressure -- Recirculating Thermal Oil heated with package heaters housed in a boiler tank.Detailed Specs: -- 122" x 61" Thermal Oil heated Hot Press with drilled steel platens, 1.5" thick, 25" Max Working height.. -- (8) Hydraulic "upstroke cylinders", 100 mm diameter, rack & Pinion guide system for parallel closing of the platens. -- 160 Ton total pressure, 46 PSI specific pressure over the entire platen area; 7.5 KW (10 HP) hydraulic pump motor. Platen moving speed 5 FPM -- 92 kW Electric Heater with 1.5 kW (2 HP) Hot Oil circulation pump; approximately 180° C (356° F) maximum operating temperature. -- Loading from (3) sides, heavy I-beam welded steel frame construction. -- "Safety" emergency Stop Cable around the operating sides of the machine, and E-STOP mounted on the control panel. -- Features: "Last" (2) cylinders can be turned off to press shorter panels. - Overall press weight is approx. 20,900Lbs).
Call for Price
HYDREX HPX510-5 Hot Press 120 Tons with (5) Daylight openings. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.Features (Overall): -- Board size up to 5' x 10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time, emergency pedal, and quad temperature protection device. -- (6) Cylinders (upstroke) -- 120 Tons of overall pressure, -- Recirculating Thermal Oil heated with package heaters housed in a boiler tank.Detailed Specs: -- 122" x 61" Thermal Oil heated Hot Press with drilled steel platens, 1.5" thick; -- (6) Hydraulic "upstroke cylinders", approx. 85 mm dia.; Rack & Pinion guide system for parallel closing of the platens. -- 120 Ton total pressure; 54 kW of heating power. 40 PSI specific pressure over the entire platen area; 4.5 kW (6 HP) hydraulic pump motor. -- 1.5 kW (2 HP) Hot Oil circulation pump; approx. 120° C (248° F) max. operating temperature. -- Max Working height is 4"; Loading from (3) sides; 39-1/2" from the floor with lower platen in the down position: heavy I-beam welded steel frame construction. -- "Safety" emergency Stop Cable around the operating sides of the machine, and E-STOP mounted on the control panel. -- Features: "Last" (2) cylinders can be turned off to press shorter panels. - Overall press weight is approx. 24,000 Lbs.
Call for Price
HYDREX HPX510-5 Hot Press 160 Tons using (8) hydraulic cylinders, Five daylight openings. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.Features (Overall): -- Board size up to 5' x10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time , emergency pedal, quad temperature protection device. -- (8) Cylinders (upstroke) -- 160 Tons of overall pressure, -- Recirculating Thermal Oil heated with package heaters housed in a boiler tank.Detailed Specs: -- 122" x 61" Thermal Oil heated Hot Press with drilled steel platens, 1.5" thick; -- (8) Hydraulic "upstroke cylinders", approx. 85 mm dia.; rack & Pinion guide system for parallel closing of the platens. -- 40 PSI specific pressure over the entire platen area; 54 KW heating power. Approx. 7.5 KW (10 HP) hydraulic pump motor. -- 1.5 kW (2 HP) Hot Oil circulation pump; approx. 120° C (248° F) max. operating temperature. -- Max Working height is 4"; Loading from (3) sides; 39-1/2" from floor with lower platen in the down position: heavy I-beam welded steel frame construction. -- "Safety" emergency Stop Cable around the operating sides of the machine, and E-STOP mounted on the control panel. -- Overall press weight is approx. 27.500 Lbs. -- Available: Extra Large Oil Heating Tank for Special Higher Temperatures if needed.
Call for Price
Operating voltage 220v, 3PH 43” x 96” capacity on platens Electric heating Hydraulic pressure – up-acting cylinders Free-standing control cabinet Heat regulators for each platen Timers Double palm safety switch
This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 126" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening. -- 12" Deep x 42" wide clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.
This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With it's modular design with each section having its own pressure control and 40" opening, 13" daylight. -- 12" Deep x 42" long clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.
JLT 78H-16W-42L Mini Air Pod PressThis Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, Specifications: -- 16" Deep x 42" long clamping capacity. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.
JLT 78H-16W-84L-40H-M4 Pneumatic Pod Press w/adjustable Opening.Specifications: -- Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 84" long steel platens for face gluing a variety of solid wood components. -- Powered by a total of (18) 20 square inch diaphragm cylinders. -- With it's modular design each section has its own pressure control and 40" opening. -- 16" Wide x 84" Long x 40" High with fixed clamping opening with 1-1/2" adjustable increments. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.
Call for Price
Call for Price
JLT Panel Pro Clamp Model 78D-5-S 5-Levels with (6) clamps each with panel flatner 110 v Single phase Will do 80”x 40”
JOOS JUNIOR III Hot Press 98.4" x 49.2" Platen size is perfect for up to 4' x 8' panels.Specifications: -- 4-3/4" Maximum opening/stroke, Bottom platen slides sideways in and out for layup & loading. -- 80 Tons max. pressure, specific pressure 39 PSI, pneumatic 14-airbag pressure system requires 85 PSI compressed air hookup only; Equipped with: -- Micro-chronometer pressing cycle timer. -- Separate temperature adjustment for top & bottom platens, electrically heated for up to 90° C (190° F) operating temperature. -- The press has a "safety" pull rope on all (4) sides.
Call for Price
---In Auction---NO RESERVE---Parts Machine--- L & L GA 84-32 40" x 84" Flatbed High Frequency RF Edge Gluer NOTE: Missing Parts Specifications: -Gluing cap. 40" x 84" x 4-1/2" Thick. - Platen size 42" x 84". Equipped with: -(12) 2" Dia. x 4" Stroke Hydraulic side pressure cylinders, On 6" centers. - (4) 4" dia. & 10" Stroke Hydraulic top pressure cylinders. 15 kW Frequency generator, with Solid-state rectifiers capable of curing 1,500 sq./in. of glueline/Min. - 3 HP Hydraulic unit. - Overhead mounted control panel. Complete with: - 47" X 123" Infeed Table, with Pusher. - 47" X 91" Outfeed Table. Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/RF-230192/event/A051324$1
Call for Price
Call for Price
Specification from owner 5 Foot Wide - Midwest Automation top and bottom high pressure laminating line capable of laminating up to 5’ x 12’ panels consisting of the following equipment: Powered infeed roller conveyor PC-160 panel cleaner with top and bottom nylon brushes and dust collection shrouds. GS-417 top and bottom glue spreader with 65” panel width capacity, glue rolls are in excellent condition, separate top and bottom direct drive motors, powered opening, glue pump system. PP-500 panel positioning station for panels up to 62”W x 148”L x 1.63”T. RP-3170 heated roller press with 67”W high temperature silicone covered top and bottom rolls. SL-510 scissor lift table, 5’ x 10’ roller platform and 6000 lb. capacity. Includes 2 new recoated glue rollers and manuals. All equipment is 575V, 3PH. May consider selling pieces separately.
Call for Price
Monco TB60 60" inch Hot Roll Laminating Line 65" Cap., Top & Bottom Laminator with oil heated chrome plated rollers 14" roller diameter 25 - 106 FPM 5 HP feed motor 48 kW oil heating system, 400° F max. heating including over-temperature cutoff safety device. 1 HP Oil circulation pump & a 1.5 HP hydraulic system for up to 900 PSI line pressure 3" dia. x 4" stroke cylinders control roll pressure. 62" width capacity. Solid-State temperature, high limit & cool down controls Manual emergency stop system on all (4) columns to stop the drive & raise the rolls.
$ 28,900
NEWMAN HP-688 Hydraulic Cold Press; 6-Sections (top platens) each 24" x 84" each; 190 tons per platen, for a total tonnage of 1,140 tonsSpecifications: -- Center posts between second and third platens, and between fourth and fifth platens, creating three overall areas of 49" x 84". -- Max. fixed opening 52" with 12" cylinder stroke, each platen section has (2) 10" bore with 5" dia. ram cylinders; -- 26-1/2" Working height (bed-to-floor), dual spring loaded rows of rollers in lower platen for easy loading & removal of panels. -- Approx. 3,000 PSI pressure/head (150 PSI specific pressure), side-mounted self-contained hydraulic system w/tank, 10 HP continuous operating pressure compensating pump. -- Manual pressure control and directional control and gauge for each platen. -- Depressable rollers in the bottom platen for easy loading and unloading.