• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
39 Results Found for Firewood Processor Viewing 1 - 20 of 39 results

Chipper-Parts

Electrical

Wear-Parts

Mechanical-Harvesters

Marking-and-Tally

Bits-and-Shanks

Chainsaw

Saw-Grinders
Find More Supplies
PREMIUM LISTINGS
Bells Machine 6000 firewood processor with 32’ conveyor, 54” circular saw, 6 way wedge, 4 strand live deck, heated cab, triple axle, grizzly. 318 hours on machine
Equipment Location:The Pas, MB
Waugh's Woods Ltd
204-623-2135
very few hours on machine. still has original bar and chain on it. used one season on a daily rate. can produce 1.5 to 2 cords of wood per hour. can take pieces from 4' to 12'. we added 4 feet of live deck (now 4 strands) to take 16' logs to speed up production. this new section is bolted on so that transport is still allowable with a quick re-attachment for re-installation. has a 14' conveyor that is adjustable to heights enough to load dump body trucks if needed or can be lowered to where you can tail firewood pieces with ease. it has a 6 way splitting head along with a 2 way straight blade for larger pieces (night logs). powered by a 44 hp Kubota turbo diesel with an extreme pressure on the ram. there is a 7 second cycle time on the action. large forward chain to move logs with ease. quick slasher bar for non stop action. clamp and cut style unit. drop chain for measurement. hydraulics are run on dextron transmission fluid which is great for cold morning starts and operation. bar is oiled out of hydraulic tank which the amount is adjustable and only uses a very little amount (5 gallons per season). folds up in a neat unit and is easily transportable. everything in excellent working condition and is a turn key unit. recently services with synthetic oil for cooler running engine temperatures. unit comes with a top off of all fluids so you can start work immediately. completely road ready with all D.O.T. measures taken in affect (except tag. never tagged because it was a stationary operation and under a shelter for operation. feel free to call at either 229-251-1975 or 229-251-1976 for information. time to buy now so you can stock up for the next season.
Equipment Location:stockton, GA
dixieland lumber company
229-251-1976
STANDARD LISTINGS
New Bells Machine Series 6000 Processor with Heated Cab, Conveyor. Machine is in stock ready to go. Give us a call today.
Equipment Location:Constantia, NY
Kleis Equipment LLC
315-779-4636
Blockbuster Model 14-12 Firewood Processor
Equipment Location:Mt Pleasant, IA
Blockbuster Inc
319-986-5525
Blockbuster Model 18-20+ Firewood Processor
Equipment Location:Mt Pleasant, IA
Blockbuster Inc
319-986-5525
The NEW Brute Force Firewood Processor from S & S Mfg offers you MAXIMUM Production for MINIMUM Investment. The Firewood Business is ALL about the cost of production, and with our lower price-point and higher output you MAXIMIZE PROFIT! In the $30,000 - $50,000 Class there simply is NO MACHINE that comes close - and we outperform many larger machines.
Equipment Location:Dorchester, WI
Brute Force
715-550-1077
8' attached hydraulic conveyor 100 hours 4- way splitting wedge 2 strand live deck 19HP Kohler engine 1-2 cords per hour Joystick controller operates the hydraulic saw, clamp, live deck and log infeed conveyor Electric bar oiler Hydraulic oil cooler Last log measuing grid Fenders and tail lights Saw bar: 25" 60"W x 20'L 3,500lbs approximate weight Excellent condition! This 2015 Brute Force 16-24 Firewood Processor is still in like "new" condition and is ready to load! It was purchased new this summer and the seller has had a change of plans. This will split up to 16" diameter logs
Equipment Location:MN
Carolina Machinery Sales, Inc
704-288-1904
2014 Cord King, 16-30 slasher saw model, 16' conveyor, Cat C 2.2 diesel, two strand live deck, dual-axle assembly, seat, hydraulic oil cooler, saw dust chute. Purchased at Essex Junction, VT this past summer. Customer is upgrading to new Rapido Loco 20. ONLY 80 HOURS RUN TIME. THIS IS ESSEN-TIALLY A BRAND NEW MACHINE. Please call 518-232-8804 for more information on this processor.
Equipment Location:Williamsburg, MA
CRD Metalworks
888-667-8580
Cord King CS20-30 (Model 44) 80 HP CAT Diesel 15 Hours on the motor Circle saw 16-Way Splitter This firewood processor is ready to tow away!
Equipment Location:VA
Carolina Machinery Sales, Inc
704-288-1904
Recent Trade, Model 60 Cord King Firewood Processor. John Deere 4045 Diesel engine. 60" saw blade. No log deck. Tandem axle with brakes. Hours @ 1670. Comes with Cord King off loading conveyor not shown in photos. Also for additional cost we have the Cord King Tumbler for screening the wood. Machine has AC, heated cabin, nice seat, many extra's! Comes with 32' conveyor! e-mail: marcus@multitekinc.com or call us at 800-243-5438. Available for quick delivery. Asking $89,500 OBO.
Equipment Location:Prentice, WI
Multitek Inc
715-428-2000
2000 Cord King Model 60 Firewood Processor Includes 32' Hydraulic Conveyor, Enclosed Cab, Heater does not work, John Deere 115 HP Turbo Diesel Engine with 5,670 Hours, 4 Cords an Hour, 28" Diameter Capacity, 10 way Wedge, Auto Cycle
Equipment Location:West
Bethel Equipment Company
252-825-1000
60HP CAT diesel engine Upgraded 40" slasher saw Heated cab Hydraulic log stop Hydraulic folding live deck 16' attached conveyor 6 way wedge - hydraulic adjusted 2,000 hours and well maintained This 2012 Cord King 36 Firewood Processor is in good working/runnning condition according to the owner and it is ready to load! The seller has upgraded to a larger model.
Equipment Location:MN
Carolina Machinery Sales, Inc
704-288-1904
S O L D
2004 Cord King model 60 with 4000 hrs. Located in Pine Bush, NY Contact Cord King at 1-888-219-9663 or bob at 613-812-1080 for more information.
Equipment Location:Pine Bush, NY
Cord King International Inc
613-267-0018
Firewood Saw. This machine is a Cornell Firewood saw. Item #00624
Equipment Location:Sturgeon Lake, MN
L & L Sales
218-372-4232
Firewood Processor New Never Been Used, Hydraulic Blade Motor, 2-3 Cords Per Hour depending on what your Splitting, Infeed Deck, Waste conveyor, Product Conveyor, 40" Blade, 18" diameter Logs, 12 Way Splitter, Double Clamp, Log Turner, 40-50 Ton Press, Whole system will Fit on 1 flat Bed Load.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
160 hours 50HP White diesel engine Cuts up to 19' logs Folding log deck Trailer breaks All new wiring and lights Overhead grapple 2 plus cord per hour This custom built firewood processor is in good running/working condition according to the seller and is ready to load!
Equipment Location:MN
Carolina Machinery Sales, Inc
704-288-1904
Firewood Processor Custom Built
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
The DYNA SC-15 is our newest Firewood Processor. Built to cut a 16in (22in Max) diameter log up to 16ft in length, the SC-15 combines the industrial-size, high-output SC-16 frame and log capacity with our SC-14s highly reliable and versatile hydraulic componentry and powerplant to bring you an affordable firewood processor built to take on thousands of cords per year. The 37HP Kohler Gas Engine and standard 4in x 26in hydraulic cylinder allow this processor to cut and split up to 3 cords per hour. 2-way and 4-way Wedge STD, 6-way, 8-way Wedge OPT 7 Second Splitting Cycle Fully Hydraulic Saw and Clamp Operation Joystick Hand Controls Pricing Includes 14ft Integrated Conveyor All Pricing Factory Direct - FOB Evart, MI (Factory Shipping Available) Call/Text Derrick or Brooke at 218-260-4950
Equipment Location:Duluth, MN
DYNA Products
888-820-3962
The DYNA SC-16 is our flagship Firewood Processor. Built to cut a 16in (22in Max) diameter log up to 16ft in length, the SC-16 is the processor of choice for full-time, high-output operations. The 48HP Kubota Diesel Engine and standard 4.5in x 30in hydraulic cylinder allow this processor to cut and split up to 4 cords per hour. Check Out our YouTube Video: youtu.be/t4re6j7teWk 2-way and 4-way Wedge STD, 6-way, 8-way Wedge OPT 4 Second Splitting Cycle Fully Hydraulic Saw and Clamp Operation Joystick Hand Controls Tandem Axle 14ft and 16ft Integrated Belt Conveyors Optionally Available All Pricing Factory Direct - FOB Evart, MI (Factory Shipping Available) Call/Text Derrick or Brooke at 218-260-4950
Equipment Location:Duluth, MN
DYNA Products
888-820-3962
The DYNA SC-12 (or SC-12XP) Firewood Processor is built to cut a 12in diameter (15in Max) log up to 10ft in length. With a 13HP Honda Gas Engine (pull-start) or 20HP Honda Gas Engine (electric start) and an optional High-Flow Hydraulic Pump, this firewood processor will cut and split up to 1.5 cords per hour. Perfectly suited for the farm or a family heating their home with firewood, all the way on up to the small commercial producer. The SC-12 (or SC-12XP) is a ruggedly built machine made to last a lifetime. Check out our YouTube Video: youtu.be/wskhd4I8Ets 2-way and 4-way Wedge STD, 6-way Wedge OPT Log Loader STD: Load Logs without a skid loader! 10/13 Second Splitter Cycle .404 Harvester Saw Chain with an 18in Harvester Bar Hydraulic Log Clamp Optional Upgrade 8ft or 10ft Integrated Belt Conveyors Optionally Available All Pricing Factory Direct - FOB Evart, MI (Factory Shipping Available) Call/Text Derrick or Brooke at 218-260-4950
Equipment Location:Duluth, MN
DYNA Products
888-820-3962