Equipment For Sale

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WINTERSTEIGER - DSG 150 ECO, ...Thin Cutting Frame SawSide & Center Guides: Fitted as standard on the basic machine to guarantee the broadest possible range of application. Specifications: -- 11 kW (15 HP) Main motor; 0.3 - 1.5 MPM feed speeds; 210 mm saw frame stroke with (450) strokes/Min. -- 30 - 216 mm Cutting height, adjustable as required; max. +/- 0.5 mm difference in block height. -- 60 - 150 mm Cutting width (side guide); (2) 23 - 70 mm cutting width (using center guide); (2) channels max. 72.5 mm using 7.5 mm guide or with (5) channels max 24.5 mm using variable block width; 300 mm min. block length. -- 1.5 mm Cutting accuracy; +/- 0.2 mm Cutting loss (depending on saw length). -- Max. (30) saw blades (excluding scraper saws); (3) 120 mm sawdust extraction tubes. -- "Air Jet" Module: Cleans the lamellas and saw blades during the sawing process by blowing away the sawdust; cools down the saw blades during the sawing process and cleans the shaving space of the saw blades. -- "Air Jet" also increases the saw blades life and improves the lamella's accuracy. Sawdust-free lamellas can then be glued immediately after cutting.Comes with transformer

Wintersteiger DSG Sonic Frame Saw

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

2020 Wood Beaver 18 BAB Only 245 hours Shrink wrap machine also available

WM LT300 w/Cab. Electric Powered.

Wood Mizer 4 head resaw with run-a-round , needs some chain and cylinders put back on it, cuts 6" wide

2004 Wood-Mizer LT40H Portable Sawmill - 1 owner - 28 HP Kohler gas engine with 5200 hours - Mill currently in operation - Debarker - LubeMizer - Extra loader cylinders, clamp cylinder and many other spare parts and blades - Shingle and Lapsider - Cook's Sharpener, Setter and Blade Straightener. - Road Ready Call 800-459-2148 for more info.

2002 Wood-Mizer LT70. Original Owner. 25 HP 3 phase electric motor. Band width 1.5 ". Infeed length 20'. Infeed width 8' with stop and load. Outfeed length 20' incline with 3 way sort. Outfeed width 32". Cap 20' x 38". Includes 26' two strand green chain brow. Call 800-459-2148 for more info.

2001 Wood Mizer LT40 Super Hydraulic - Wood Mizer LT40 Super Hydraulic with re-saw attachment with setworks - Replaced the hydraulic motor for the re-saw and replaced the guides. - 25HP Electric Motor. - Road ready. - Can be switched to portable power. Diesel costs around $4000 from Wood-Mizer. Call 800-459-2148 for more info.

Wood-Mizer 12' (2) strand custom log deck, Excellent Condition (Rarely Used)... Contact Amy for more information (728)723-9449

Wood-Mizer EG100 #20380 - 220V single phase - 10 HP electric motor - Both extension tables - Probably around 1000 hours (no meter) - Speed knob is broken. Seller ran it by himself and it worked fine on slow speed. - Safety switch was disconnected as it kept tripping. Call 800-459-2148 for more info.

55hp diesel engine w/60hr. This always under cover very well maintained, includes a pedestal control station w/ fully proportional joystick controls allowing the operator to be positioned anywhere to control all hyd. head & bed functions hr. on control arm, debarker, Lube-Mizer, 6 box of blades. Call 432-507-7670 for more info.

Wood-Mizer LT40 Super Hydraulic Electric 3180 hours Includes power inverter Currently under power and in production PRICE REDUCED

2022 Wood-Mizer LT40HD Super. 40 total hours, 38 HP gas engine, debarker, Lube-Mizer, Laser kit, board return, This mill is fully loaded and basically new. Call or text 802-371-7590 for more info.

Woodmizer HR1000 Horizontal Resaw, very low hours. Asking $27,500

Woodmizer LT 70 Sawmill with Log Deck and Powered Off Feed Table - Super Wide - Purchased in Jan 2019 - Hours 3,305 - Excellent condition - 55 HP Diesel - 36" max log diameter with 28" max width of cut and 20' 2" length of cut - Current price new $85,000 + tax and delivery with a 60 week lead time. - Our price $65,000 (sawmill only) Optional Options: - Auto Log Deck 20ft @ 35" high $12,000 (great condition) - Powered Off-Feed Table $8,000 - 3ea Woodmizer dead roller table $1,000 ea. (available, not included) - New Price for sawmill, log deck and powered off feed table is around $110,000 - Buy the Sawmill, Log Deck and Off-Feed table for $82,000: Save $3,000 - $88,000 for all components. (Sawmill, Log Deck, Off-Feed Table, 3 dead rolls.) Call 800-459-2148 for more info.