Edgebanders For Sale

HOLZ-HER - 1411-3, EDGEBANDER Cartridge Glue System, 5 mm edge thickness cap. (up to 13 mm w/optional tooling), 1-3/4" max. panel thickness, and 7" min. panel length.Equipped with: -- Automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff. -- Pressure section with (1) large dia. drive roller & (1) idle. Workstations: -- Double-motor end trim model "1918" (tilting 0° - 10°), 0.5 HP - 18,000 RPM motor each. -- Top & bottom radius trim model "1942", 0.8 HP - 18,000 RPM motor each (trim motors are 0.6 kW HF). -- Top & bottom glue scraper unit "1964", with air jets for blow-off. -- Top & bottom buffing unit "1940" (tilting cap. 0 - 5°), 0.2 HP - 1,400 RPM Motors each. -- Variable feed speed from 36 - 52 FPM. - Fixed outboard panel support. Complete with: -- PLC (Programmable Logic Control) for easy setup and program storage. -- Frequency converter, sound enclosure, and used tooling..

Holz-Her 1403 EdgebanderSpecifications: -- 0.016" - 3/16" Edge thickness cap., height max. 2", panel length min. 7" and thickness 1/4" to a max. 1-3/4". -- Equipped with: Automatic feed magazine for coil material & strips, with guillotine cutoff; cartridge glue system, heat-up time (3 - 5) Min; 4-roll pressure section. -- Workstations: Double motor end trim (1 HP - 10,500 RPM motor ea.); top & bottom trim (1 HP - 28,000 RPM motor ea.), for flush & bevel trim; single feed speed of 33 FPM. -- Complete with: Sound enclosure & outrigger panel support.

Holz-her Streamer 1054 Edgebander Top/Bottom Trimmers End Trimmers Scraping Buffing Station No longer under power - Ready to ship! Serviced by Holly-her tech.

HOLZ-HER STREAMER 1054 EDGEBANDER (W/PRE-MILLING) + GLU JET Gluing Unit: -- Specifications:Min./max. 0.4 - 6 mm Edge Cap; 8 - 60 mm panel thickness; min. panel length 160 mm; feed-speed, 10 MPM (33 FPM) single speed.Equipped with: -- Pre-milling, (2) vertical spindles, counter-rotating with jump action. and manually adjustable infeed fence. -- HOLZ-HER "GLU JET" Cartridge System and flat glue nozzle applicator; Glue heat up time (2 - 3) minutes max.! -- Pressure Section with: (1) Large dia. drive roller & (2) pneumatic pressure controlled idle rollers; horizontal adjustment w/digital indicator. -- Automatic Edge Magazine for coil and strip feed.Workstations: -- End Trimming Unit: Double motor end trims, travel on 45° slides; tilt from 0° to 15°. -- Multifunction Trimming Unit: Top & Bottom trim station for flush/bevel/radius with digital readouts. -- Profile Scraping Unit: Top & Bottom radius scraping unit with mechanical digital readouts positioning. -- Buffing Unit: 2-Motor Top & Bottom buffing. Operator & Machine Controls: -- "HOLZ-HER" Compact Control with: Swivel control panel at eye height, dual digital thermostats, manual push button on/off switches for glue heat up, edge magazine, and all workstations. Complete with: -- Safety/Sound Hood over workstations; fixed panel support outrigger, manually adjustable hold-down beam. - Original factory documentation; used tooling on the machine. -- Actual Model is: HOLZ-HER - STREAMER 1054

In NO RESERVE Auction with $100 starting bid. HOLZ-HER 1488 TRIATHLON Edgebander w/ Pre-Milling & Corner Rounding (2007) (Opening Bid $100) (No Reserve) (Good Condition) (Batavia, IL)

---In NO RESERVE Auction with $100 starting bid--- HOLZ-HER 1327 SPRINT CLASSIC SPECIAL EDGEBANDER + Glu Jet EVA / PUR Hybrid Technology Gluing Systems (2015) (Opening Bid $100) (No Reserve) (Good Condition) (Auburn, AL) (Note: This is a "SPECIAL MACHINE for THIN TAPE ONLY")

HOLZ-HER 1321 SPRINT EDGEBANDER WITH PRE-MILL AND CORNER ROUNDING WORK STATIONS – 633 OPERATING HOURS!Specifications: -- 0.4 - 15 mm (0.02" - 0.59") Edgebanding thickness, 3 mm (0.12") Max. coil thickness, 15 mm (0.59") Max. strip thickness. -- 55 mm (2.17") Edgebanding height. -- 6 - 50 mm (0.24" - 1.97") Panel thickness, 60 mm (2.36") Min. panel width, 180 mm (7.09") Min. panel length. -- 35-1/2" Feed chain height, 18 MPM (59 FPM) Feed speed, 14" Outboard support adjustment.Equipped with: -- "1961" Pre-milling unit, with (2) 2 kW (2-3/4 HP) - 12,000 RPM - 200 Hz Motors, with Up & down cutting modes, & 5 mm (0.20") Plunge travel. -- 820 mm (32.28") Dia. Coil table. -- "1903" Automatic edge magazine, For solid edges, strips, & coiled material, with 40 mm (1.57") Max. loading capacity. -- "1906" Cartridge-type gluing application system, For EVA & PUR glue, with 3-1/2 Min. Heat-up time, Automatic recharge, 4-Cartridge Magazine cap. -- Pressure section, with (1) Large driven roll & (2) Small idler rolls, All rolls with Pneumatic individual control via PLC. -- Microprocessor PLC Control, with 5" LCD Display, Touchpad, PLC for edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, & buffing, & Manual operation without a program. -- Sound enclosure.Workstations: -- "1918" Front & rear end trim unit, with (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors & 0° - 10° Horizontal & Vertical tilt. -- "1823" Top & bottom flush trim unit, with (2) 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motors. -- "1824" Multifunctional trim unit (flush trim/radius/chamfer), with (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors, 5 mm (0.20") Max. radii & flush trim, & 5 mm (0.20") x 45° Max. chamfer. -- "1929" Top & bottom PVC profile scrape unit, with Reversible insert carbide knives & 3 mm (0.12") Max. radii. -- "1983" Single-motor profile trim (corner rounding) unit, with 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motor. -- "1964" Pneumatically-controlled Top & bottom glue scrape unit. -- "1944" Top & bottom buffing unit, with (2) 0.20 kW (1/4 HP) 1,670 RPM Motors & 45° Swivel.Dimensions of this specific machine with outboard support extended: 252" x 63" x 70" H.

HOLZ-HER - 1488 TRIATHLON, ...Edgebander w/Premilling & Corner Rounding + LIGMATECH -ZR01 Return ConveyorWorking Capacity: Max. 1" (25 mm) solid wood banding. thin PVC, Veneer, HPL & 3 mm PVC cap.; 60 mm (2.37") max. panel thickness, and 140 mm (5-1/2") min. panel length.Front-End equipped with: -- Premilling Unit: (2) 2.2 kW (3.0 HP) - 12,000 RPM; (1) jump spindle with digital indicators for positioning. -- Gluing System: "ULTRA-GRANUPRESS" System with: Flat glue nozzle only 3° angle of approach ideal for solid wood edgebanding & "quick melt" feature. -- Automatic Edge Magazine for: Coil, strip & solid wood edgebanding with TRACTOR-BELT feed system; Heavy-Duty guillotine for 4 mm PVC. -- Pressure Section with: (3) Large dia. rollers, each w/individual pneumatic plunge and pressure control; programmable with Servo motor positioning; powered 1st roller with electronic speed control synchronized with chain feed speed.Edgebanding Workstations: -- End Trimming Unit: (2) 0.75 HP - 6,800 RPM ea. "HF" Motors with: "Uni-Point Swivel", quick change from flush 0° - 15° bevel programmable from operator panel; Servo controls. -- Flush Trimming Unit: (2) 2.6 HP - 12,000 RPM - 200 Cy HF motors; Servo controls. -- Fine/Bevel/Radius Trimming Unit: (2) 1-1/2 HP- 12,000 RPM - 200 Cy HF motors; bevels 0° - 45°, Servo controls + SIKO digital readouts. -- Corner Rounding Unit: (2) "HF" Top motors & (2) HF Bottom motors for trimming leading-and-trailing upper-and-lower edge/corners; trailing edge (4 x 3/4 HP - 12,000 RPM - 300 Cy HF motors; 2 mm or 3 mm radius cap. -- Profile Scraper Unit: "Super Duty" for positively smooth finishing thick PVC for radius range from 2 - 5 mm; vertical & horizontal tracing wheels, positioning enabled through (1) Servo motor function from Control Panel; SIKO readouts for easy setup. -- Buffing Unit: (2) Lateral buffing wheel positioning motors with Oscillating & Programmable Jump Action for cleaning & polishing of edges (two 0.25 HP - 3,600 RPM motors); tilts 0° - 5°, Servo controls.Equipped with and Includes: -- PPC 231 Controller with 15" LCD color screen: 90% of all set-ups can be adjusted from the Control Panel; programmable for a large variety of edges like solid lumber, veneer strips or coils, HPL, thin & thick PVC; line control so there are no mechanical limit switches along the chain track. -- Variable feed speed from 8 - 20 MPM (26 - 65 FPM); panel overhang beyond chain 35 mm (1.38"); features automatic track pad lubrication. -- Factory Documentation: Operating and Spare Parts Manuals. -- Actual Model is: HOLZ-HER 1488 TRIATHLON + LIGMATECH ZR01

HOLZ-HER 1329 SPRINT EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + Holz-Her Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness min./max.: 0.4 - 12 mm (0.016 - 0.472"); Coiled material 0.4 - 3 mm (0.016 - 0.157").Panel thickness: 8 - 60 mm (0.236 - 2.362"); Workpiece width min. of: 60 mm (2.36"); workpiece length min.: 160 mm (6.29"). Programmable Logic Control (PLC) for pre-milling; edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Pre-milling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM Motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor-Belt Feed System": Edge guide equipped with automatic guillotine lockout for safety. -- Pressure Section (1913 Mot):Servo Controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers; straight and tapered pressure rollers for perfect glued joints. -- Gluing System (GJ301 Auto):"GLU JE" Hybrid Technology: "Thin film" technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning; automatic reload of the glue cartridges or granulated. -- Workstations:End Trimming Unit (1918-P): Front & Rear: (2) 0.35 kW (1/2 HP) - 9,000 RPM Motor each; unipoint swivel axis for no reindexing when changing from flush to bevel; end trim (0° - 10° bevel)."PCS" Programmable pneumatic changeover from flush to bevel. -- Multifunction Trimming Unit (1827MOT4): (2) 0.65 kW (0.87 HP) - 12,000 RPM Each motor; Servo motors: (1) Horizontal copy wheel & (1) tool spindle position; programmable top & bottom unit. Unipoint design with no second adjustment with: Pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out prepositioning of trimming motor. -- Corner Rounding Unit (1833 MOT4):(2) Motors each with: 0.22 kW (0.30 HP) - 9,000 RPM; for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors.Up to 3 mm edge thickness and workpiece thickness; min./max. 8 - 60 mm (0.31 - 2.36"), max. feed speed 18 MPM (59 FMP); up to 25 mm panel thickness; 26 - 38 mm panel thickness, 16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929-MOT2): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom: Ball bearing guided and pneumatic controlled. -- Buffing Station (1940) Top & Bottom buffin

HOMAG EDGETEQ S-200 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + EVA/PUR + "AirTec" Technology: -- Specifications:0.3 - 3 mm (0.016 - 0.11") edge; 8 - 60 mm (0,312 - 2.375") panel thickness; 160 mm (6.375") min. panel length and 70 mm (2.75") min. panel width.Equipped with: -- Separating/cleaning agent spraying units. -- Pre-Milling Station, (2) motors @ 2.25 kW (3.0 HP), 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. --100 mm dia. diamond cutter heads. -- Integrated heated glue roller. -- AirTec reactivation unit for zero edge finish. -- Automatic Edge Magazine, for strip & coil stock, up to 3 mm PVC. -- "Heavy Duty" guillotine. -- EVA/PUR "Quick-Change" glue pot and roller application unit. -- Pressure Section, 1st. roller driven plus (2) idle rollers, timed pneumatic pressure controlled. -- Feed Speed, 8 MPM. (26 FPM). Operator Interface: -- HOMAG "easyTouch" Operator Interface with 7" graphic color touch display & soft keypad. Intuitive, user-oriented navigation.20 storable programs guarantee flexibility when processing a wide variety of edge materials and changing customer requirements.Clear overview of the help and assistant functions, including the glue pot temperature or troubleshooting in plain textWorkstations: End Trimming: - (2) Motor @ 0.35 kW (1/2 HP) 12,000 RPM, automatic chamfer from control panel 0°- 15°. -- Flush/Bevel-Fine/Radius Trimming Unit: - Top/bottom (2) motors, 0.55 kW (3/4 HP) 12,000 RPM, auto tilt positioning from control panel 0° - 25°, with combination flush/radius/chamfer cutter-heads.Includes (3) positioning options, profile 1, profile 2, and 3 flush trimming. -- Corner Rounding Unit: (1) Motor 0.35 kW (1/2 HP) 12,000 RPM, with automatic adjustment from control panel for 1-mil, 2-mil & 3-mil thickness.For leading & trailing edges vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. -- Scraping, Multi-Profile (PVC): Top/bottom with (2) profiles. 1 mm and 2 mm or 3 mm in place of 2 mm positioning of vertical & horizontal copy wheels. PVC scrape collection box. -- Buffing Unit: - Top/bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM. Complete with:Motorized hold-down pressure beam; padded sound enclosure, isolation transformer for multiple input voltages, used tooling and Original Factory machine documentation. -- Actual Model is HOMAG EDGETEQ S-200 (aka OPTIMAT KDF 1130 AT).

HOMAG EDGETEQ S-500 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:0.3 - 20 mm (0.011 - 7/8") Edge material thickness; 8 - 60 mm (0.3' - 2.375") panel thickness; 160 mm (6.375") min. panel length and 70 mm (2.75") min. panel width.High flexibility is achieved as all edge materials can be processed: 0.3 mm Melamine, up to 3 mm ABS, PP, PVC and wood as coil material.Solid wood strips and veneer strips up to 12 mm are fed in individually and up to 20 mm from the package. Even veneer strips of up to 1 mm can be fed from the package.For perfect high-gloss parts, important components such as the motor-driven top pressure and the automatic adjustment of the glue joint scrapers are used.Special tracing elements are ideal for processing of acute angled or obtuse angled parts or parts with hinge holes and transversal grooves.Variable Production Feed Speeds from 16 - 30 MPM (52 - 98 FPM). -- Equipped with: Separating agent spraying unit. -- Pre-milling Station: (2) Motors @ 2.25 kW (3.0 HP), 12.000 RPM; LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. Equipped with diamond cutter heads. -- Infeed fence with Servo motor positioning. -- Infrared Radiant Quartz Heating Unit between glue roller and pressure section. -- Automatic Edge Magazine for strip & coil stock, strips 0.4 mm - 12 mm (0.015 - 0.47"), coils up to 3 mm PVC with "HD" guillotine. -- "Quick Change" Glue Tank for maintenance, glue type & color change. -- Pressure Section: 1st. Roller driven plus (2) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- HOMAG "PowerTouch control, memory: 256 MB RAM, 1 GB Flash Card Drive. -- Workstations: End Trimming: (2) Motors @ 0.35 kW (1/2 HP) - 12,000 RPM; automatic chamfer from control panel 0°- 15°. -- Multistage MS40 Flush/Bevel-Fine/Radius Trimming Unit:Top/bottom: (2) Motors, 0.55 kW (3/4 HP) - 12,000 RPM, auto-tilt positioning 0° - 25°; with combination flush/radius/chamfer cutterheads. -- Multifunctional trimming unit MF60 Servo trim - Horizontal and vertical tracing wheels, equipped with brushless multi-axis Servo motors for positioning of work unit & horizontal copy wheels for quick changeover. Includes (3) positioning options: Profile 1, profile 2, and flush trimming; nested top copy system. -- Corner Rounding Unit: (1) 0.35 kW (1/2 HP) - 12,000 RPM Motor for leading & trailing edges, vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. -- Scraping, multi-profile (PVC): Top/bottom with (2) profiles (1 mm and 2 mm or 3 mm instead of 2 mm), Servo control positioning of vertical & horizontal copy wheels. PVC scrape collection box. -- Flat Glue Joint Scraping Unit: Flush top/bottom on panel surface with floating insert knives. -- Buffing Unit: Top & bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM. -- Operator Control: HOMAG powerTouch2 control with clearer structure, 3

HOMAG EDGETEQ S-300 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + AirTec EVA/PUR Gluing Technology:Specifications:0.4 - 8 mm (0.016 - 5/16") edge; 8 - 60 mm (5/16 - 2-3/8") panel thickness; 160 mm (6-3/8") min. panel length and 70 mm (2-3/4") min. panel width.Equipped with: Pre-Milling Station, (2) motors @ 2.25 kW (3.0 HP), 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges.Equipped with diamond cutter heads. -- In-feed Fence, with servo motor positioning. -- Infrared Radiant Quartz Heating Unit between glue roller and pressure section. -- Automatic Edge Magazine, for strip & coil stock, strips 0.4 mm - 8 mm (0.016 - 5/16"), coils up to 3 mm PVC and "HD" guillotine. -- "AirTec" EVA/PUR gluing Technology with "Quick Change" Glue Tank for maintenance & glue color change. -- Pressure Section, 1st. roller driven plus (2) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- Feed Speed, variable 8 - 14 MPM. (26 - 46 FPM), 11 MPM (36 FPM) when using contour trimming. -- HOMAG "Power Touch Control, Memory: 256 MB Ram, 1 GB Flash Card Drive.Operator control panel w/22" color HD wide screen, soft keypad & internal modem for remote diagnostic link.Workstations: End Trimming: - (2) Motor @ 0.35 kW (1/2 HP) 12,000 RPM, automatic chamfer from control panel 0°- 15°. -- Flush/Bevel-Fine/Radius Trimming Unit: - Top/bottom (2) motors, 0.55 kW (3/4 HP) 12,000 RPM, auto tilt positioning 0° - 25°, with combination flush/radius/chamfer cutter-heads.Horizontal and vertical tracing wheels, equipped with brushless multi-axis Servo motors for positioning of work-unit & horizontal copy wheels for quick changeover. Includes (3) positioning options, profile 1, profile 2, and flush trimming, and nested top copy system. -- Corner Rounding Unit: (1) Motor 0.35 kW (1/2 HP) 12,000 RPM, with manual adjustment for 1-mil, 2-mil & 3-mil thickness.For leading & trailing edges vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. -- Scraping, Multi-Profile (PVC): Top/bottom with (2) profiles. 1 mm and 2 mm or 3 mm instead of 2 mm, servo control positioning of vertical & horizontal copy wheels. PVC scrape collection box. -- Scraping Glue Unit: - Flush top/bottom on panel surface with floating insert knives. -- Buffing Unit: - Top/bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM. Complete with:Motorized, programmable hold-down pressure beam; padded sound enclosure, isolation transformer for multiple input voltages, used tooling and Original Factory machine documentation. -- Actual Model is HOMAG EDGETEQ S-300 AirTec, OPTIMAT KDF 440C.

HOMAG AMBITION 2274 (KAL 370/6/A3) EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: Working Capacity: Coiled stock min/max Edge thickness 0.3 - 3 mm (0.011. - 0.118"), Strip material min/max Edge Thickness 0.4 - 1 mm (0.016 - 0.039"),Panel stock min/max thickness 8 - 60 mm (0.472" - 1.574"). Panel Over-Hang 30 mm (1.18").Minimum workpiece width: 2.36" (60 mm) with workpiece thickness ≤ 22 mm) & 4.13" (105 mm) with workpiece thickness > 22 mm). -- Cleaning Agent Spraying Units:Top/Bottom spraying device prior to workpiece pre-milling. Designed for applying a separating agent, for easier cleaning of any residual glue on the panel. -- In-Feed Fence: Pre-heated manually adjustable in-feed fence with digital indicators. -- Pre-Milling Station:(2) 2.2 HP (3.0 kW) - 150 Hz, 9,000 RPM vertical jointing spindle motors; equipped with panel blow-off device and SIKO digital counters for adjustments. -- Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application. -- Edge Magazine:A multi-purpose 2-coil magazine expands capability by running coiled material & strips. Maximum roll diameter: 400 mm & 830 mm.Magazine height adjustment allows for greater usage of varying panel heights by raising and lowering the magazine table, allowing the operator to center the panelon the edgebanding. -- Gluing System Homag Quickmelt: QA 3 - Quick Melt Overhead Unit & heated roller applicator digitally displayed thermostat for both upper and lower unit.34 mm Dia. Glue Roller allows for excellent control of temperature for optimum bonding results with individual adjustment for leading and trailing glue gatesLower melting unit equipped with automatic glue level control. Melting capacity: 12 kG/Hr (26 Lbs/Hr). Ultra-fast five-minute (5) heat-up time. -- Pressure Section: Programmable (Servo), automatic pressure zone adjustment, (1) large 150 mm dia. driven & (4) 70 mm dia. idle rollers, pneumatic pressure control depending on edgebanding material used.Workstations: -- End Trimming Unit:(2) 1 HP (0.8 kW) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip. Programmable (Servo). -- Rough/Pre-Trimming Unit:(2) 0.55 kW 0.74 HP (0.55 kW) - 12,000 RPM Motors, tilting range +/- 1° & counter-rotating to machine feed to prevent blowout & .Height adjustment synchronized with the top pressure-beam .With digital counters. -- Profile/Bevel/Corner Rounding Unit:(2) 0.54 HP ( 0.4 kW) - 12,000 RPM, Multi-function Motors to fine trim the edge overhangs at the work-piece upper & lower edge, as well as trimming around the front & rear vertical edge.By way of the machine control, this unit adjusts between a radius and a chamfer without a tooling change.Max. feed speed 20 MPM (65.6 FPM) when using "Corner Rounding Unit". -- Profile/Bevel Scraping Unit:Top & bottom for thick PVC/ABS, electro-pneumatic positioning & pneumatically activated. Pneumatically-controlled

- Min. panel height 0.47 inch - Max. panel height 1.57 inch - Min. edge thickness 0.01 inch - Max. edge thickness 0.24 inch - Max. forward feed speed 82.02 ft/min - Top pressure with rubber belt - No. Panel Sizing / Milling units 2 Pre-milling unit - Lamps to preheat the side of the panel - Edge coil magazine - Gluing system - glue pot for EVA hot melt glue - premelter for EVA hot melt glue - QA65 - Roller set to press the edge - no. pressure roller 7 - with positioning by NC No. Edge Processing Units 6 First Processing Unit - End trimming Constructor model HL81 - no. motors 2 - with positioning by NC Second Processing Unit - top and bottom rough trimming - no. motors 2 - with positioning by NC Third Processing Unit - Multi Function trimming and corner rounding - Constructor model - FK11 - no. motors 2 - with positioning by NC Fourth Processing unit - edge scraping - with positioning by NC Fifth Processing Unit - glue scraping - with positioning by NC Sixth Processing Unit - buffing - no. motors 2 Spray unit Control system Power Touch

HOMAG AMBITION 2274 (KAL 370/6/A3) EDGEBANDER (W/PRE-MILL/HIGH PRODUCTION): -- Specifications: Working Capacity: Coiled stock min/max Edge thickness 0.3 - 3 mm (0.011. - 0.118"), Strip material min/max Edge Thickness 0.4 - 1 mm (0.016 - 0.039"),Panel stock min/max thickness 8 - 60 mm (0.472" - 1.574"). Panel Over-Hang 30 mm (1.18").Minimum workpiece width: 2.36" (60 mm) with workpiece thickness ≤ 22 mm) & 4.13" (105 mm) with workpiece thickness > 22 mm). -- Cleaning Agent Spraying Units:Top/Bottom spraying device prior to workpiece pre-milling. Designed for applying a separating agent, for easier cleaning of any residual glue on the panel. -- In-Feed Fence: Pre-heated manually adjustable in-feed fence with digital indicators. -- Pre-Milling Station:(2) 2.2 HP (3.0 kW) - 150 Hz, 9,000 RPM vertical jointing spindle motors; equipped with panel blow-off device and SIKO digital counters for adjustments. -- Panel Pre-Heat Unit: Quartz lamp for heating substrate edge before glue application. -- Edge Magazine:A multi-purpose 2-coil magazine expands capability by running coiled material & strips. Maximum roll diameter: 400 mm & 830 mm.Magazine height adjustment allows for greater usage of varying panel heights by raising and lowering the magazine table, allowing the operator to center the panelon the edgebanding. -- Gluing System Homag Quickmelt GA 65 / QA 65: QA 65 - EVA Quick Melt Overhead Unit & heated roller applicator digitally displayed thermostat for both upper and lower unit.34 mm Dia. Glue Roller allows for excellent control of temperature for optimum bonding results with individual adjustment for leading and trailing glue gatesLower melting unit equipped with automatic glue level control. Melting capacity: 12 kG/Hr (26 Lbs/Hr). Ultra-fast five-minute heat-up time. -- Pressure Section: Programmable (Servo), automatic pressure zone adjustment, (1) large 150 mm dia. driven & (4) 70 mm dia. idle rollers, pneumatic pressure control depending on edgebanding material used.Workstations: -- End Trimming Unit PK 25:(2) 1 HP (0.8 kW) - 200 Hz, 12,000 RPM Motor ea. to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer to straight snip. Programmable (Servo). -- Fine Trimming Unit PF20:(2) 0.54 HP ( 0.4 kW) - 12,000 RPM, fine trimming unit for edge overhangs at the work-piece upper & lower edge.Operator Interface: -- Power Touch Control Multi-Touch Screen Controller on separate console with 21.5" Full HD flat screen display, keyboard and mouse. Functions in Windows environment, includes fault diagnostic, OS9 real-time operating system."WoodScout", included graphic diagnostic tool designed to increase throughput and decrease down time. Graphical PLC diagnosis display of the error location in the machineCustomer-specific data base system that allows the operator to enter the reason for the error as well as the corrective measures to assist with future troubleshootingHand-held remote control pendant reaching to th

HOMAG EDGETEQ S-500 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications:0.3 - 20 mm (0.011 - 7/8") Edge material thickness; 8 - 60 mm (0.3' - 2.375") panel thickness; 160 mm (6.375") min. panel length and 70 mm (2.75") min. panel width.High flexibility is achieved as all edge materials can be processed: 0.3 mm Melamine, up to 3 mm ABS, PP, PVC and wood as coil material.Solid wood strips and veneer strips up to 12 mm are fed in individually and up to 20 mm from the package. Even veneer strips of up to 1 mm can be fed from the package.For perfect high-gloss parts, important components such as the motor-driven top pressure and the automatic adjustment of the glue joint scrapers are used.Special tracing elements are ideal for processing of acute angled or obtuse angled parts or parts with hinge holes and transversal grooves.Variable Production Feed Speeds from 16 - 30 MPM (52 - 98 FPM). -- Equipped with: Separating agent spraying unit. -- Pre-milling Station: (2) Motors @ 2.25 kW (3.0 HP), 12.000 RPM; LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. Equipped with diamond cutter heads. -- Infeed fence with Servo motor positioning. -- Infrared Radiant Quartz Heating Unit between glue roller and pressure section. -- Automatic Edge Magazine for strip & coil stock, strips 0.4 mm - 12 mm (0.015 - 0.47"), coils up to 3 mm PVC with "HD" guillotine. -- "Quick Change" Glue Tank for maintenance, glue type & color change. -- Pressure Section: 1st. Roller driven plus (2) idle rollers, timed pneumatic pressure controlled; Servo motor positioning for programmable edge thickness changeover. -- HOMAG "PowerTouch control, memory: 256 MB RAM, 1 GB Flash Card Drive. -- Workstations: End Trimming: (2) Motors @ 0.35 kW (1/2 HP) - 12,000 RPM; automatic chamfer from control panel 0°- 15°. -- Multistage MS40 Flush/Bevel-Fine/Radius Trimming Unit:Top/bottom: (2) Motors, 0.55 kW (3/4 HP) - 12,000 RPM, auto-tilt positioning 0° - 25°; with combination flush/radius/chamfer cutterheads. -- Multifunctional trimming unit MF60 Servo trim - Horizontal and vertical tracing wheels, equipped with brushless multi-axis Servo motors for positioning of work unit & horizontal copy wheels for quick changeover. Includes (3) positioning options: Profile 1, profile 2, and flush trimming; nested top copy system. -- Corner Rounding Unit: (1) 0.35 kW (1/2 HP) - 12,000 RPM Motor for leading & trailing edges, vertical corner rounding of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness. -- Scraping, multi-profile (PVC): Top/bottom with (2) profiles (1 mm and 2 mm or 3 mm instead of 2 mm), Servo control positioning of vertical & horizontal copy wheels. PVC scrape collection box. -- Flat Glue Joint Scraping Unit: Flush top/bottom on panel surface with floating insert knives. -- Buffing Unit: Top & bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM. -- Operator Control: HOMAG powerTouch2 control with clearer structure, 3

HOMAG EDGETEQ S-200 B EDGEBANDER (COMPACT): -- Specifications:0.4 - 3 mm (0.016 - 0.125") edge coil/strips thickness; 8 - 40 mm (0,312 - 1.6") panel thickness; 140 mm (5.5") min. panel length and 70 mm (2.75") min. panel width.Equipped with: -- Automatic Edge Magazine, for strip & coil stock, up to 3 mm PVC. -- "Heavy Duty" guillotine. -- EVA "Quick-Change" glue pot and roller application unit. 12-15 min. heat up time, re-heat - 3min. -- Pressure Section, 1st. roller driven plus (2) idle rollers, timed pneumatic pressure controlled. -- Feed Speed, 8 MPM. (26 FPM). Operator Interface: -- HOMAG "easyTouch" Operator Interface with 7" graphic color touch display & soft keypad. Intuitive, user-oriented navigation.20 storable programs guarantee flexibility when processing a wide variety of edge materials and changing customer requirements.Clear overview of the help and assistant functions, including the glue pot temperature or troubleshooting in plain textWorkstations: -- End Trimming: - (2) Motor @ 0.18 kW (.24 HP) 12,000 RPM on linear guides. -- Fine Trimming Unit: - Top/bottom (2) motors, 0.27 kW (.36 HP) 12,000 RPM, with (3) working positioning: (1) flush trimming, (2) trimming with overhang, (3) radius/bevel trimming. -- Open Space: For the addition of a "Quick Change" Profile Scrapping Unit. -- Buffing Unit: - Top/bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM. Complete with:Manual adjusted top hold-down pressure beam; padded sound enclosure, isolation transformer for multiple input voltages, used tooling and Original Factory machine documentation. -- Actual Model is HOMAG EDGETEQ S-200 B.

HOMAG AMBITION 2262 (KAL 210) EDGEBANDER (W/PRE-MILL & CORNER ROUNDING); PRODUCTION Edgebander (w/Premill & Corner Rounding): -- Specifications: Working Capacity: Coiled stock min./max. Edge thickness 0.4 - 3 mm (0.016. - 0.118"); strip material min./max. Edge Thickness 0.4 - 6 mm (0.16 - 0.234").Panel stock min./max. thickness 12 - 40 mm (0.472" - 1.574"). Panel Overhang 30 mm (1.18"). -- Infeed Fence:Adjustable infeed fence with manual digital indicator positioning. -- Pre-milling Station:(2) 3.0 kW (4.0 HP), 150 Hz, 9,000 RPM Motors; equipped with: Trimming column, (2) horizontal & cross-slides with spindle adjustment.Electro-pneumatic horizontal jump movement of the 1st motor; includes electronic frequency inverter for control of motor speed and braking.(2) Dust extraction hoods, air jet panel blow-off device & SIKO digital counters for adjustments. -- Panel Preheater:Preheating the panel brings the panel to an appropriate temperature for better adhesion; this is especially beneficial in cooler temperatures.Quartz lamp for heating substrate edge before glue application improved edge quality and optimum bonding. -- Multipurpose Magazine:2-Coil magazine expands capability by running coiled material, strips, and solid wood bands. Magazine height adjustment allows for greater usage of varying panel heights by raising and lowering the magazine table allowing the Operator to center the panelon the edgeband. -- Premelting System: Overhead Premelting Unit -- Gluing System: EVA - Hot Melt.QA 34 - Quick Melt Overhead Unit & heated roller applicator digitally displayed thermostat for both upper and lower unit.34 mm Dia. Glue Roller allow for excellent control of temperature for optimum bonding results with individual adjustment for leading and trailing glue gates.Lower melting unit equipped with: Automatic glue level control; melting capacity: 12 kG/h (26 Lbs/Hr). -- Pressure Section:Manual adjustment with digital counter: (1) Large 160 mm dia. driven & (6) 70 mm dia. idle rollers; pneumatic pressure control depending on edgebanding material used.WORKSTATIONS: -- End Trimming Unit:(2) 0.8 kW (1.0 HP) - 200 Hz, 12,000 RPM Motors to cut excess edge on the front & back of the panel; pneumatic adjusting from chamfer 30° to straight cut. -- Rough/Pre-trimming Unit:Top & bottom, (2) 0.55 kW (0.74 HP) - 12,000 RPM motors; height adjustment with the top pressure beam and tilting range +/- 1°. Manually adjusted with digital counters. -- Multifunction Profile/Bevel/Corner Rounding Unit:Multifunction (2) 0.4 kW (0.54 HP) - 12,000 RPM Motors to fine trim the edge overhangs at the workpiece upper & lower edge, as well as trimming around the front & rear vertical edge; Servo controlled.Max. feed speed 0f 20 MPM (65.6 FPM) when corner rounding. -- Profile/Bevel Scraping Unit:Top & bottom for thick PVC/ABS, pneumatically activated. -- Flat Glue Scraper Unit:Top & bottom, pneumatically activated to remove potential glue squeeze-out. -- Buffing Unit:Top & b

HOMAG KAL 310/4/A3/S2 EDGEBANDER (W/PRE-MILLING): -- Specifications:Working Capacity: 0.3 - 3 mm Edge thickness cap., min. panel width 22 mm; max. panel thickness 60 mm; Dual speed -- Equipped with: Pre-Milling Unit 3481: (2) motors, 3 kW, 9000 RPM each, pneumatic controlled/jump milling spindles and adjustable, manual with digital indicator in-feed fence. -- Hot Melt Glue System "QA 34" Quick-Melt Unit: with heated glue roller; -- Edge Magazine Unit 2456: Automatic (2) coil/strip magazine, coils 0.3 - 3.0 mm. -- Pressure Section: Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; with pneumatic pressure control for straight edges -- HOMATIC "NC 21" Power Control System: Controller operates in Windows-XP environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem. -- Workstations:End Trimming Unit: (2) motors, 0.18 kW - 12,000 RPM each, to cut excess edge on the front & back of the panel. -- Flush/Pre-Trimming Unit 3201: Top & bottom trim station, 0.55 kW - 12,000 RPM +/- 1° angle adjustment, manual positioning with digital counters. -- Fine/Bevel Trim Unit 3216: (2) motors 0.4kW - 12,000 RPM each, manual positioning with digital counters -- Profile Edge Scraping Unit: with electro-pneumatic adjustment -- Buffing Unit 4402: Top and bottom with oscillation. (2) motors, 0.25kW, 2850 RPM -- Complete with & Features:Electronic DC brakes on all trim motors; sound cabin for all workstations. -- Adjustable outboard panel support with swing out arms for up to 800 mm. -- 80 mm Feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations. -- Actual Model is HOMAG KAL 310/4/A3/S2Note: This machine has a new display and a new back up one as well!

HOMAG KL 78/A20/S2 EDGEBANDER (W/PRE-MILL & CORNER ROUNDING): -- Specifications: 0.4 - 20 mm ( 0.02" - 0.78") Edge thickness cap., min. panel width 55 mm (2.18") for panel thickness 12 - 22 mm (0.5" - 0.875") and under; 100 mm (3.9") for panel thickness over 22 - 60 mm (0.875" - 2.3"); for up to 3 mm Coil stock, HPL, and strip stock up to 20 mm (0.75").Feed & Infeed Section of Machine: -- Top pressure beam with: Double-wide compound V-belts; 80 mm wide feed track chain plates, vulcanized rubber insert pads, and Auto-Lube; variable feed speed from 18 - 24 MPM (59 - 79 FPM); 950 mm height/working level infeed. -- Pre-Milling Station with: (2) 3 kW - 150 Hz, 9,000 RPM Motors, panel blow-off device; 2-position infeed fence (on/off), SIKO digital manual fence control. -- Panel Pre-Heater with: Quartz lamp for heating substrate edge before glue application. -- Edge Feeding device equipped with: Automatic coil magazine for quick coil changeover; strip feeder for up to 20 mm (3/4") solid wood banding. -- "Quick Melt" Glue System with: Reversible glue roller applicator; pressure roll section with (1) large dia. driven and (6) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses.Edgebanding Workstations: -- Double motor front & rear end trim, straight & chamfer trimming (0.8 HP - 12,000 RPM ea. motor). -- Top & Bottom flush trim (2 HP - 12,000 RPM ea. motor). -- Corner rounding unit: Equipped with (4) motors, 2 HP - 12,000 RPM each motor. -- Universal Milling/Grooving Unit tiltable 90°. -- Edge Scrape Super-Finishing unit for thick PVC/ABS with chip collection box. -- Top & Bottom Flat Glue Scraper to remove potential glue squeeze-out. -- Top & Bottom oscillating buffing unit (two 0.33 HP - 1,650 RPM motors). -- "HOMATIC NC 21" controller features with Keypad & LCD display, stores working programs and controls functions of workstations, allows fault diagnostic and more, etc. -- Complete with: PLC controlled, motorized beam height adjustment; servo adjustments on Top & Bottom flush trim, and servo controlled Scraper Stations. -- Electronic DC brakes on all trim motors, sound cabins for all trim workstations, and adjustable outboard panel support. -- Actual Model is HOMAG KL 78/A20/S2.